Tae-Hyun Kim

Tae-Hyun Kim

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2024 in Electronics
Verified
Journal Article
Open access
PDF file
SBSeong-Jun Byun
Seong-Jun Byun
JSJeetaeck Seo
Jeetaeck Seo
TKTae-Hyun Kim
Tae-Hyun Kim
JLJeong-Hun Lee
Jeong-Hun Lee
YKYoungkyu Kim
Youngkyu Kim
KBKwang-Hyun Baek
Kwang-Hyun Baek
This paper presents a novel high-precision 11-bit single-slope/successive approximation register analog-to-digital converter (SS/SAR ADC) architecture specifically designed for CMOS image sensors (CISs). The proposed design solves critical challenges in conventional ADCs by utilizing only two reference voltages, thereby minimizing voltage mismatch and completely eliminating the need for complex switch arrays. This unique approach reduces the transistor count by 64 per column ADC, significantly enhancing area efficiency and circuit simplicity. Furthermore, a groundbreaking on-chip fine step range calibration technique is introduced to mitigate the impact of parasitic capacitance, ensuring the precise alignment between coarse and fine steps and achieving exceptional linearity. Fabricated using a 0.18-µm CMOS process, the ADC demonstrates superior performance metrics, including a differential nonlinearity (DNL) of −1/+1.86 LSB, an integral nonlinearity (INL) of −2.74/+2.79 LSB, an effective number of bits (ENOB) of 8.3 bits, and a signal-to-noise and distortion ratio (SNDR) of 51.77 dB. Operating at 240 kS/s with a power consumption of 22.16 µW, the ADC achieves an outstanding figure-of-merit (FOMW) of 0.291 pJ/step. These results demonstrate the proposed architecture’s potential as a transformative solution for high-speed, energy-efficient CIS applications.

1 January 2026 in Electronics Letters
Verified
Journal Article
Open access
PDF file
JLJeonghun Lee
Jeonghun Lee
TKTae-Hyun Kim
Tae-Hyun Kim
JSJeetaeck Seo
Jeetaeck Seo
SLSukho Lee
Sukho Lee
KBKwang-Hyun Baek
Kwang-Hyun Baek
This letter presents an adaptive temperature compensation technique for a subthreshold analogue front-end (AFE) in low-power application. The conventional subthreshold AFE suffers from significant temperature dependency, compromising performance over a wide operating range. To overcome this critical issue, the proposed technique provides adaptive performance compensation, driven by a compact inverter-based sensor that identifies the current operating zone. This work was fabricated in a 180 nm $180 \,\mathrm{nm}$ CMOS process, where the core compensation blocks occupy a compact area of only 0.015 mm 2 $0.015 \,\mathrm{mm}^{2}$ . To demonstrate its advantages, the proposed circuit was integrated with an AFE-embedded noise-shaping SAR ADC. Measurement results confirm robust performance for the entire system across a −40 to 80 ∘ C $80 \,^{\circ }\mathrm{C}$ range, with the proposed technique improving the average SNDR by 4.67 dB $4.67 \,\mathrm{dB}$ at low temperatures and achieving a power reduction of 4.02 μ W $4.02 \,\umu \mathrm{W}$ at high temperatures. Notably, the compensation unit consumes less than 5.6 % $5.6 \,\%$ of the total system power.

9 June 2026 in Electronics
Verified
Journal Article
Open access
PDF file
LHLee Seung Hyeon
Lee Seung Hyeon
YSYong-Seok Seo
Yong-Seok Seo
JSJeetaeck Seo
Jeetaeck Seo
TKTae-Hyun Kim
Tae-Hyun Kim
JLJeong-Hun Lee
Jeong-Hun Lee
KBKwang-Hyun Baek
Kwang-Hyun Baek
This paper presents a 7-bit 1.6 GS/s hybrid capacitive-to-charge-injection DAC (C-CIDAC)-based flash-assisted time-interleaved (FATI) successive-approximation-register (SAR) analog-to-digital converter (ADC) that improves the limited input range and temperature-induced gain variation in conventional CIDAC-based SAR ADCs. In the proposed architecture, a DAC voltage common-mode (VCM) shift up to 48 LSBs is internally generated during the coarse conversion, enabling a rail-to-rail ADC input range while improving VCM independence. In addition, a fully on-chip background gain-calibration scheme is introduced to compensate for the gain error between the CDAC and CIDAC caused by temperature variation. By taking advantage of the pulse-activation-based CIDAC operation scheme, the proposed calibration achieves robust gain tracking without any external bias control. The proposed four-channel FATI-SAR ADC was designed using a 65 nm CMOS process and occupies 13,628 μm2, including the background calibration circuitry. The peak differential nonlinearity (DNL) and integral nonlinearity (INL) are +0.60/−0.60 LSB and +0.72/−0.76 LSB at −40 °C and 105 °C, respectively. At Nyquist input, the simulated SNDR and SFDR are 41.52 dB and 53.36 dB, respectively. The ADC consumes 8.551 mW and achieves an FoMW of 54.6 fJ/conversion step. Comprehensive post-layout simulation results show that the proposed FATI-SAR ADC operates at 1.6 GS/s and maintains an ENOB above 6.3 across a temperature range from −40 °C to 105 °C at Nyquist input.