Kwang-Hyun Baek

Prof. Dr. Kwang-Hyun Baek


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 October 2017 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JAJae-Sung An
Jae-Sung An
SHSang-Hyun Han
Sang-Hyun Han
JKJu Eon Kim
Ju Eon Kim
DYDong-Hyun Yoon
Dong-Hyun Yoon
YKYoung-Hwan Kim
Young-Hwan Kim
OKOh-Kyong Kwon
Oh-Kyong Kwon
This paper proposes an analog front-end (AFE) IC using a multiple-frequency driving method (MFDM). The proposed AFE IC achieves a high signal-to-noise ratio (SNR) by using an external noise spectrum and locating the frequencies of the excitation signals in low-noise regions. In addition, it employs the MFDM to increase the frame rate by simultaneously sending excitation signals having multiple frequencies to the touch screen panel (TSP). The proposed AFE IC extracts the coordinates of the finger as well as the coordinates, pressure, and tilt angle of the active stylus with the force gauge and gyro sensor. The proposed AFE IC and active stylus were fabricated in a 0.13-μm standard CMOS process. The measurement results show that the proposed AFE IC achieves a frame rate of 3.9 kHz, and SNRs of 61.0 and 50.1 dB when a finger and active stylus are used, respectively. In addition, the pressure and tilt angle of the active stylus are expressed with 6-bit resolution. A capacitive touch system with the proposed AFE IC is demonstrated with a 65-in 104 × 64 TSP using ten fingers and the active stylus with the pressure and tilt angle.

1 November 2009 in IEEE Transactions on Consumer Electronics
Verified
Journal Article
Closed access
SYSang-Hyeok Yang
Sang-Hyeok Yang
KKKyoung-Bum Kim
Kyoung-Bum Kim
EKEung Ju Kim
Eung Ju Kim
KBKwang-Hyun Baek
Kwang-Hyun Baek
SKSuki Kim
Suki Kim
This paper proposes a CMOS motion detector which consumes extremely low power. CMOS image sensor pixels in this motion detector senses image and image data are converted into just one-bit by using clocked comparators. Because using one-bit data makes additional processing units simple, total power consumption of this CMOS motion detector can be reduced. That is, internal memory which is composed of the clocked gating schemes based on the flip-flop and XOR function which compares a current image with a previous one in order to detect a difference are main features for the simple structure. However one-bit data process has a critical problem that it is hard to detect a motion when image inclines to white or block. For solving this problem, reference voltage controller which makes about the same proportion of white and block is implemented. We have made a test module of the proposed CMOS motion detector and tested it by using FPGA. According to the measurement result, total power consumption is about 32 ¿W at 3.3 V. Therefore, this motion detector can be useful for portable battery-operated devices.

23 August 2018 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
DJDong-Kyu Jung
Dong-Kyu Jung
YJYun-Hwan Jung
Yun-Hwan Jung
TYTaegeun Yoo
Taegeun Yoo
DYDong-Hyun Yoon
Dong-Hyun Yoon
BJBo-Yun Jung
Bo-Yun Jung
KBKwang-Hyun Baek
Kwang-Hyun Baek
This paper presents a 12-bit multi-channel resistor- resistor-string digital-to-analog converter (RRDAC) using a shared R-string scheme for an area efficient display source driver. The proposed scheme relaxes the required equivalent resistance value of R-string of each channel by sharing a channel R-string that is simultaneously connected to the same tap of a global R-string. Thus, the overall DAC size can further be minimized while maintaining the same accuracy. That is, if the proposed scheme is implemented with the same size as the conventional RRDAC, higher accuracy can also be achieved. For the verification of shared resistor string scheme, a 12-bit RRDAC was fabricated using 0.35-μm standard CMOS technology. Compared with the conventional RRDAC, the proposed design showed a 15% reduction in size, a DNL of 0.49 LSB and an output voltage deviation of 9. 3mV for eight different chips. Also, the area per channel was 0.0465 mm 2 .

24 April 2020 in Sensors
Verified
Journal Article
Open access
PDF file
KSKiho Seong
Kiho Seong
DJDong-Kyu Jung
Dong-Kyu Jung
DYDong-Hyun Yoon
Dong-Hyun Yoon
Jae-Soub HanJae-Soub Han
Jae-Soub Han
JKJu-Eon Kim
Ju-Eon Kim
KBKwang-Hyun Baek
Kwang-Hyun Baek
Ultra-wideband (UWB) wireless communication is prospering as a powerful partner of the Internet-of-things (IoT). Due to the ongoing development of UWB wireless communications, the demand for high-speed and medium resolution analog-to-digital converters (ADCs) continues to grow. The successive approximation register (SAR) ADCs are the most powerful candidate to meet these demands, attracting both industries and academia. In particular, recent time-interleaved SAR ADCs show that multi-giga sample per second (GS/s) can be achieved by overcoming the challenges of high-speed implementation of existing SAR ADCs. However, there are still critical issues that need to be addressed before the time-interleaved SAR ADCs can be applied in real commercial applications. The most well-known problem is that the time-interleaved SAR ADC architecture requires multiple sub-ADCs, and the mismatches between these sub-ADCs can significantly degrade overall ADC performance. And one of the most difficult mismatches to solve is the sampling timing skew. Recently, research to solve this timing-skew problem has been intensively studied. In this paper, we focus on the cutting-edge timing-skew calibration technique using a window detector. Based on the pros and cons analysis of the existing techniques, we come up with an idea that increases the benefits of the window detector-based timing-skew calibration techniques and minimizes the power and area overheads. Finally, through the continuous development of this idea, we propose a timing-skew calibration technique using a comparator offset-based window detector. To demonstrate the effectiveness of the proposed technique, intensive works were performed, including the design of a 7-bit, 2.5 GS/s 5-channel time-interleaved SAR ADC and various simulations, and the results prove excellent efficacy of signal-to-noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) of 40.79 dB and 48.97 dB at Nyquist frequency, respectively, while the proposed window detector occupies only 6.5% of the total active area, and consumes 11% of the total power.

1 November 2013 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YKYong Sin Kim
Yong Sin Kim
SCSoon-Ik Cho
Soon-Ik Cho
YSYouhwan Shin
Youhwan Shin
JLJingu Lee
Jingu Lee
KBKwang-Hyun Baek
Kwang-Hyun Baek
This letter presents a dual plate capacitive proximity sensor (PS) that is integrated into a single chip with high environmental noise immunity. To efficiently reject environmental noise, the proposed PS employs two noise rejection techniques: 1) the use of a switched-charge amplifier and 2) synchronous sampling/filtering technique. The proposed PS is fabricated using a standard CMOS 0.5- μm process, and it occupies an area of 0.7 mm × 0.3 mm. Experimental results show that the proposed PS can detect an object up to 8 cm away from the sensor at an average current of 370 μA with a resolution of 1% output frequency.

17 May 2022 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
DYDong-Hyun Yoon
Dong-Hyun Yoon
DJDong-Kyu Jung
Dong-Kyu Jung
KSKiho Seong
Kiho Seong
Jae-Soub HanJae-Soub Han
Jae-Soub Han
KCKeun-Yong Chung
Keun-Yong Chung
KBKwang-Hyun Baek
Kwang-Hyun Baek
This article proposes a 3.2-GHz subsampling phase-locked loop (SSPLL)-based injection-locked clock multiplier (ILCM) using a subsampling delay-locked loop (SSDLL). The proposed ILCM achieves a superior noise reduction effect at low offset frequency because of the high feedback gain of SSPLL. Also, SSDLL is proposed for background phase calibration between SSPLL and injection. Since SSPLL and SSDLL use identical SSCP, the power consumption of the frequency and phase calibration is only 1.32 mW. This work is fabricated in a 65-nm CMOS process, and the 10-kHz phase noise is improved by 8.6 dB. The rms jitter from 10 kHz to 30 MHz is 178 fs. The chip-to-chip variations (20 chips) are 17 and 169 fs with/without SSDLL, respectively. The measured results show that FoM 1 , FoM 2 , and total power consumption are −245.1, −260.1 dB, and 9.85 mW, respectively.