Mohammed Abdul Qader

Mr. Mohammed Abdul Qader

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2025 in Materials
Verified
Journal Article
Open access
PDF file
DHDryver R Huston
Dryver R Huston
MDMandar M. Mohan Dewoolkar
Mandar M. Mohan Dewoolkar
DGDiarmuid Gregory
Diarmuid Gregory
MQMohammed Abdul Qader
Mohammed Abdul Qader
BYBismark Yeboah
Bismark Yeboah
Concrete, a widely used construction material, faces environmental concerns and limited durability. This study aimed to enhance concrete durability and long-term resilience by incorporating shrinking chitosan-based fibers. Two types of fibers were used: active fibers, which shrink upon initiation of the curing cycle in concrete, and passive fibers, which served as experimental controls and were pre-shrunk before being added. Two types of durability tests were conducted: freeze-thaw and chloride penetration. Fiber ratios of 0.5 wt%, 1 wt%, and 2 wt%, along with a 0 wt% control, were used for freeze-thaw testing, while ratios of 0.24 wt%, 0.36 wt%, 0.5 wt%, 1 wt%, and 2 wt% were used for chloride penetration. Results demonstrated significant durability improvements with active fibers. Active fiber-reinforced concrete exhibited over 200% greater freeze-thaw durability than passive fibers and over 500% compared to non-reinforced concrete. Chloride penetration testing revealed reduced penetration rates in active fiber concrete. After saltwater exposure, active fiber-reinforced concrete showed up to 59% higher resistance than passive fibers and 249% compared to the control group. These findings highlight the potential of chitosan fibers to significantly enhance concrete durability, paving the way for more sustainable construction practices.

1 January 2022 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
MQMohammed Abdul Qader
Mohammed Abdul Qader
AIAhmed Ibrahim
Ahmed Ibrahim
AAAl-Badr Alaidaros
Al-Badr Alaidaros
AAAbdul Kareem Abdulkareem
Abdul Kareem Abdulkareem
AAAbdullah Alwuayl
Abdullah Alwuayl
SASaleh J. Alghamdi
Saleh J. Alghamdi
Concrete mixes can be designed using many methods such as the British method (DOE) and the American method (ACI). It is beneficial to compare different mixes and examine their performances and the associated costs. However, designing and comparing concrete mixes by hand can be time consuming and is prone to errors. Hence, in this work, algorithms were developed and implemented for six mix design methods, which replaced the time‐consuming hand calculations with error‐free and fast ones, in a user‐friendly fashion. The programs successfully designed concrete mixes ranging from 10 to 160 MPa 28‐day compressive strengths with minimal errors and provided estimates of the cost of each mix. Also, using the developed programs, methods were compared regarding their suggested concrete ingredients’ quantities, associated cost, and general trends. Preliminary comparisons between mix design methods showed that design methods suggest similar mix proportions for a given compressive strength. Further, it was found that designing a mix using ACI method can be costly compared with the other methods. These findings and others would have been difficult to be revealed using traditional methods of mix design. More importantly, the comparisons presented in this work are only a few of the unlimited comparisons that can be easily made between normal and high strength mix design methods, which will unravel other key differences between mix design methods. Such comparisons are vital to engineers to be able to make informed decisions regarding which mix to use from strength, workability, durability, and cost point of views.

29 January 2026 in Fibers
Verified
Journal Article
Open access
PDF file
MQMohammed Abdul Qader
Mohammed Abdul Qader
SHShannon Hughes
Shannon Hughes
DHDryver R Huston
Dryver R Huston
MDMandar M. Mohan Dewoolkar
Mandar M. Mohan Dewoolkar
This study evaluates the mechanical properties and durability of novel self-shrinking chitosan fibers incorporated into a High-Performance Concrete (HPC) matrix. The cementitious system comprised a 75–25% blend of Portland Limestone Cement (PLC) and Ground Glass Pozzolan (GGP). Two variants of chitosan—food-grade and high-grade—were processed into fibers and integrated at dosages of 0.36%, 0.73%, and 1.45% by weight of binder, alongside a 0% control group. The experimental program assessed eight distinct mixtures through extended freeze–thaw testing (up to 602 cycles), electrical resistance monitoring, and compressive strength evaluation at 56 and 90 days. Results indicated that food-grade chitosan fibers caused a substantial reduction in compressive strength, ranging from 40% to 70% depending on the dosage. Despite this mechanical loss, these mixtures showed localized improvements in freeze–thaw resistance and electrical resistivity. Conversely, the high-grade chitosan fibers exhibited severe performance degradation under freeze–thaw cycling; all reinforced groups fell below 80% relative dynamic modulus, with two mixtures dropping below the 60% failure threshold. In comparison, the control mixture retained 98% of its dynamic modulus after 602 cycles. Ultimately, the findings suggest that, in their current formulation, self-shrinking chitosan fibers do not provide consistent or reliable enhancements to the structural integrity or durability of high-performance concrete.