Studying the hysteretic relationships embedded in high‐frequency suspended‐sediment concentration and river discharge data over 600+ storm events provides insight into the drivers and sources of riverine sediment during storm events. However, the literature to date remains limited to a simple visual classification system (linear, clockwise, counter‐clockwise, and figure‐eight patterns) or the collapse of hysteresis patterns to an index. This study leverages 3 years of suspended‐sediment and discharge data to show proof‐of‐concept for automating the classification and assessment of event sediment dynamics using machine learning. Across all catchment sites, 600+ storm events were captured and classified into 14 hysteresis patterns. Event classification was automated using a restricted Boltzmann machine (RBM), a type of artificial neural network, trained on 2‐D images of the suspended‐sediment discharge (hysteresis) plots. Expansion of the hysteresis patterns to 14 classes allowed for new insight into drivers of the sediment‐discharge event dynamics including spatial scale, antecedent conditions, hydrology, and rainfall. The probabilistic RBM correctly classified hysteresis patterns (to the exact class or next most similar class) 70% of the time. With increased availability of high‐frequency sensor data, this approach can be used to inform watershed management efforts to identify sediment sources and reduce fine sediment export.
1 January 2019 in Geomatics, Natural Hazards and Risk
Excessive streambank erosion is a significant source of fine sediments and associated nutrients in many river systems as well as poses risk to infrastructure. Geomorphic change detection using high-resolution topographic data is a useful method for monitoring the extent of bank erosion along river corridors. Recent advances in an unmanned aircraft system (UAS) and structure from motion (SfM) photogrammetry techniques allow acquisition of high-resolution topographic data, which are the methods used in this study. To evaluate the effectiveness of UAS-based photogrammetry for monitoring bank erosion, a fixed-wing UAS was deployed to survey 20 km of river corridors in central Vermont, in the northeastern United States multiple times over a two-year period. Digital elevation models (DEMs) and DEMs of difference allowed quantification of volumetric changes along selected portions of the survey area where notable erosion occurred. Results showed that UAS was capable of collecting high-quality topographic data at fine resolutions even along vegetated river corridors provided that the surveys were conducted in early spring, after snowmelt but prior to summer vegetation growth. Longer term estimates of streambank movements using the UAS showed good comparison to previously collected airborne lidar surveys and allowed reliable quantification of significant geomorphic changes along rivers.
1 January 2020 in Science of The Total Environment
Pervious concrete pavement (PCP) is used because of its unique properties that allow water to infiltrate into the surface. The objectives of the study reported in this paper were to observe the performance of PCP in the field, determine the effectiveness of cleaning methods to restore infiltration rates, and compare field observations with laboratory results when possible. Two PCP sites in Vermont were monitored over a year through the measurement of infiltration rates at several locations. Facility-wide cleaning operations, such as street sweeping and vacuum-truck cleaning, were tested for their capability to restore infiltration rates. Spot-cleaning methods, such as hand vacuuming, pressure washing, and a combination of the two, were also tested. Infiltration rates decreased gradually during the monitoring period, with average reductions of 59% at the first facility and 26% at the second. Street sweeping and vacuum-truck cleaning restored infiltration rates by 21% and 30%, respectively, but could not restore severely clogged areas. Spot-cleaning methods increased infiltration rates by 85% after pressure washing, 10% after vacuuming, and 100% after pressure washing followed by vacuuming. Vacuum-truck cleaning was recommended. Either method, however, should be used for maintenance operations and should be started after construction. Spot-cleaning methods, with the exception of vacuuming, restored infiltration rates of severely clogged areas and were recommended for localized cleaning. Long-term monitoring compared reasonably well with that of earlier studies, whereas the results associated with cleaning were substantially lower than those found in the literature.
Concrete, a widely used construction material, faces environmental concerns and limited durability. This study aimed to enhance concrete durability and long-term resilience by incorporating shrinking chitosan-based fibers. Two types of fibers were used: active fibers, which shrink upon initiation of the curing cycle in concrete, and passive fibers, which served as experimental controls and were pre-shrunk before being added. Two types of durability tests were conducted: freeze-thaw and chloride penetration. Fiber ratios of 0.5 wt%, 1 wt%, and 2 wt%, along with a 0 wt% control, were used for freeze-thaw testing, while ratios of 0.24 wt%, 0.36 wt%, 0.5 wt%, 1 wt%, and 2 wt% were used for chloride penetration. Results demonstrated significant durability improvements with active fibers. Active fiber-reinforced concrete exhibited over 200% greater freeze-thaw durability than passive fibers and over 500% compared to non-reinforced concrete. Chloride penetration testing revealed reduced penetration rates in active fiber concrete. After saltwater exposure, active fiber-reinforced concrete showed up to 59% higher resistance than passive fibers and 249% compared to the control group. These findings highlight the potential of chitosan fibers to significantly enhance concrete durability, paving the way for more sustainable construction practices.
Foundation pits are widely distributed in modern cities, the construction of which are constrained by complex geological conditions and surrounding infrastructures. Ability to reliably control deformations and surface settlements is essential to the safety and durability of geotechnical structures, particularly in densely populated regions. There is a strong need to connect the monitoring data with fast interpretations from numerical modeling. This work aims at developing an approach to predict the deformation of foundation pits by integrating rapid simulation from the Graph Neural Network (GNN) and measurements from real engineering projects. First, predictions from 2D GNN models of deformed foundations were compared with results from Pix2Pix. A good agreement was obtained for deformation predictions between graph-based (GNN) and image-based (Pix2Pix) machine learning models. Subsequently, 3D GNN models were developed to accommodate 3D geometries, multiple materials, and complex interfaces. Good agreement was obtained for predicted deformation distributions between GNN and finite element simulations for a variety of materials and structures. For the same level of accuracy, the computational cost was reduced from 40 s in finite element method to less than 0.05 s in GNN model. Finally, the GNN model was used to predict deformation of an actual foundation pit at different time stages. Results showed that predictions from the GNN model agreed well with the actual monitoring data, from which the essential materials parameters were extracted along the transient deformation process.