A computational methodology for the hydrodynamic analysis of horizontal axis marine current turbines is presented. The approach is based on a boundary integral equation method for inviscid flows originally developed for marine propellers and adapted here to describe the flow features that characterize hydrokinetic turbines. For this purpose, semi-analytical trailing wake and viscous flow correction models are introduced. A validation study is performed by comparing hydrodynamic performance predictions with two experimental test cases and with results from other numerical models in the literature. The capability of the proposed methodology to correctly describe turbine thrust and power over a wide range of operating conditions is discussed. Viscosity effects associated to blade flow separation and stall are taken into account and predicted thrust and power are comparable with results of blade element methods that are largely used in the design of marine current turbines. The accuracy of numerical predictions tends to reduce in cases where turbine blades operate in off-design conditions.
A computational methodology for the hydrodynamic analysis of horizontal axis marine current turbines is presented. The approach is based on a boundary integral equation method for inviscid flows originally developed for marine propellers and adapted here to describe the flow features that characterize hydrokinetic turbines. To this purpose, semi-analytical trailing wake and viscous-flow correction models are introduced. A validation study is performed by comparing hydrodynamic performance predictions with two experimental test cases and with results from other numerical models in the literature. The capability of the proposed methodology to correctly describe turbine thrust and power over a wide range of operating conditions is discussed. Viscosity effects associated to blade flow separation and stall are taken into account and predicted thrust and power are comparable with results of blade element methods that are largely used in the design of marine current turbines. The accuracy of numerical predictions tend to reduce in cases where turbine blades operate in off-design conditions.
During maneuvers, propellers’ operation differs from their design due to strong modification of the wake field with respect to the straight-ahead motion. The consequent modification of the loads overstresses the mechanical components of the shaftline, exacerbates propeller side effects and worsens overall efficiency. Therefore, the analysis of these situations in the early design phase is pivotal to increase the operation capabilities and safety at sea. This task relies on novel tools capable to accurately predict the complex flow field that develops past the hull and the propeller loads. Since the solution of the fully coupled problem with the rotating propeller by viscous flow solver is impractical for routine applications, hybrid approaches are a viable alternative. In this paper, an interactive RANSE/BEM methodology is presented, where the propeller is replaced by rotating body forces that map the actual loading state of the blades, allowing a fully unsteady analysis of hull–propeller interaction. The methodology is applied to the straight ahead and pure drift motions of a twin screw propulsive configuration. Last, but not least, the study presents a validation study with accurate experimental data of the nominal wake field and single blade loads.
22 March 2025 in Journal of Marine Science and Technology
In the frame of the green-deal objectives, many challenges derive from the need to increase the energy efficiency in the marine transportation, thus to reduce the dependency from the fossil fuels. A wide range of solutions are investigated and many efforts are spent to reach the final result. Multiple interventions can be undertaken in the field of ship power-train, ranging from the identification of innovative propulsive systems, up to the development of digital-tools dedicated to the preliminary propeller design, both tailored to the specific application, namely to the ship geometrical and operative characteristics. The present work deals with the experimental campaign addressing the performances of the Velettrica SAIL-POD device performed at the CNR-INM towing tank. It is a propulsive system with an innovative variable blade-pitch mechanism, with a dual propulsive/regenerative use, conceived to propel a sail-boat and to recover the energy whilst sailing. An automated procedure, applied to the integrated hull-propeller-engine system, is here presented to define the proper geometrical and operative configuration of the device when it acts as a propeller or as a turbine, under different ship operating conditions. Results demonstrate the technology validation in laboratory of the innovative propulsive system as well as the usefulness of the adoption of digital-tools to enhance the ship performances during the service. The analysis of the propulsive performances in open water condition highlighted the areas of intervention to further develop the Velettrica SAIL-POD system.
Nowadays, the necessity to reduce the environmental pollution and to prevent the ecosystems damages by human-induced activities can be undertaken by adopting solutions that increase the overall sustainability. Specifically, in the frame of marine transportation, the reduction of the dependency from the fossil fuels is approached with the development of existing systems as well as the discovery of innovative solutions to increase the system energy efficiency. Dealing with the class of intervention related to the power-train, the design activities of a propulsive device are presented in the present work, designated to propel the ship or to recover energy when it is sailing. The Velettrica SAIL-POD device is characterized by an innovative variable blade-pitch mechanism, aimed at allowing the device to work properly under different operating conditions and tailored to the hull characteristics. The propeller design is driven by the need of high level of thrust when the device is operating in propulsive mode, low resistance when operating in regenerative mode and enhanced efficiency over the whole operativity. Accordingly, the design process has been directed towards high propeller diameter, symmetric blade section profiles, low values of expanded area/ratio and a limited excursion of blade pitch, while the design operating condition suggested low propeller rate of revolution. To comply with the above-mentioned needs, a patented mechanism has been expressly designed to regulate the blade folding kinematics together with the blade pitch excursion, whereas composite materials have been investigated to ensure blade strength and reduced weight. The power chain, consisting of a power control unit and the energy storage system, has been defined together to a dedicated Permanent Magnet motor exploiting a prescribed torque range. An extensive experimental campaign has been performed at the CNR-INM towing tank to address the SAIL-POD propulsive/regenerative performance in calm water for different operating conditions. A digital tool for propeller sizing, combining propeller performance and hull and engine characteristics, has been applied to identify the optimal propulsive and regenerative performances. Results represent the proof of concept, in laboratory environment, of the innovative propulsive system as well as the usefulness of the adoption of digital tools to enhance the ship performances during the service. The analysis of propulsive performances under open water conditions highlights the areas of intervention for further developments of SAIL-POD.