The understanding of the performance of a propeller in realistic operative conditions is nowadays a key issue for improving design techniques, guaranteeing safety and continuity of operation at sea, and reducing maintenance costs. In this paper, a summary of the recent research carried out at CNR-INSEAN devoted to the analysis of propeller loads in realistic operative scenarios, with particular emphasis on the in-plane loads, is presented. In particular, the experimental results carried out on a free running maneuvering model equipped with a novel force transducer are discussed and supported by (Computational Fluid Dynamics) analysis and the use of a simplified propeller model, based on Blade Element Momentum Theory, with the aim of achieving a deeper understanding of the mechanisms that govern the functioning of the propeller in off-design. Moreover, the analysis includes the scaling factors that can be used to obtain a prediction from model measurements, the propeller radial force being the primary cause of failures of the shaft bearings. In particular, the analysis highlighted that cavitation at full scale can cause the increment of in-plane loads by about 20% with respect to a non-cavitating case, that that in-plane loads could be more sensitive to cavitation than thrust and torque, and that Reynolds number effect is negligible. For the analysis of cavitation, an alternative version of the solver, improved with cavitation linear theory, was developed.
This paper presents an analysis of the noise generated by a marine propeller in oblique flow, by using a detached eddy simulation for the flow field modeling, and the Ffowcs Williams and Hawkings equation for hydroacoustics. The study aims to expand the understanding of noise generation from a propeller under moderate blade loading subjected to lateral flow, which simulates an idealized off-design condition like a steady-state maneuvering. Hydroacoustic results in the time and frequency domains are compared with those predicted under straight flow conditions, highlighting differences and similarities in the noise field properties. In oblique flow, a novel noise-generating mechanism, arising from complex interactions between blade(s) root vortex and the hub vortex, is identified and its impact on the radiated sound discussed as well. The investigation reveals that noise propagation toward the far-field is predominantly influenced by nonlinear acoustic effects associated with wake dynamics. It is proven that the status of far-field propagation is reached much earlier in drifting than in axial flow conditions and that the presence of the lateral flow makes the propeller noisier. This yields an overall sound pressure level distribution dominated by tonal harmonics upstream and broadband components downstream of the rotor disk, contrasting with axisymmetric configuration where the broadband component prevails throughout.
The structural response of a rudder in the wake of a marine propeller is investigated by one-way fluid–structure interaction approach. The unsteady pressure field gathered by detached eddy simulations is provided to a structural solver for the computation of deformations and stresses of the rudder. The study compares the structural response of the rudder at neutral and two equal and opposite rotations, which are representative of design conditions in straight motion and maneuvering conditions that are experienced under the action of the autopilot for course control or weak maneuvering. The analysis sheds light on the different structural behavior at the two opposite rotation angles, caused by asymmetrical variation along the span of the rudder of the angle of attack induced by the propeller slipstream, by considering the different role played by the tip and hub vortical systems. The test case consists of a rudder with a rectangular plane area and National Advisory Committee for Aeronautics 0015 sectional profile located past the E779A propeller. The propeller operates at low loading conditions, and the rudder is set at incidence δ=0∘,±4∘. The study shows that the response of the rudder is driven by flap and torsion and is asymmetric for the two and opposite rotations. The mean deformation and vibratory response are magnified for δ=−4∘ by at least 70% and 20% for the lateral and edgewise deflections, respectively, with respect to the opposite rudder incidence. In general, the excitation generated by the tip vortex is stronger than that of the hub vortex. In the most critical condition, at δ=−4∘, the excitation associated with the tip vortex is nearly double that of the hub vortex.
During maneuvers, propellers’ operation differs from their design due to strong modification of the wake field with respect to the straight-ahead motion. The consequent modification of the loads overstresses the mechanical components of the shaftline, exacerbates propeller side effects and worsens overall efficiency. Therefore, the analysis of these situations in the early design phase is pivotal to increase the operation capabilities and safety at sea. This task relies on novel tools capable to accurately predict the complex flow field that develops past the hull and the propeller loads. Since the solution of the fully coupled problem with the rotating propeller by viscous flow solver is impractical for routine applications, hybrid approaches are a viable alternative. In this paper, an interactive RANSE/BEM methodology is presented, where the propeller is replaced by rotating body forces that map the actual loading state of the blades, allowing a fully unsteady analysis of hull–propeller interaction. The methodology is applied to the straight ahead and pure drift motions of a twin screw propulsive configuration. Last, but not least, the study presents a validation study with accurate experimental data of the nominal wake field and single blade loads.
The authors proposed a mathematical model of a propeller in oblique flow suitable for the real-time simulation of tilted rotor aircraft. The paper is carried out with care, and it is developed with suitable scientific rigor. I propose the publication...