In this study, the ‘yacon’ was dried using pulsed vacuum osmotic dehydration as pretreatment followed by vacuum drying (at different temperatures) or convective drying. The use of osmotic dehydration and vacuum drying had their influence evaluated concerning drying kinetics and quality of the final product, considering fructan retention, color, and water activity. Fick’s second law and Page’s equation were suitable for the fitting of drying evolution. It was observed that higher temperatures (60 °C) resulted in shorter drying time, higher diffusivity, and higher fructan retention when compared to 40 and 50 °C. The osmotic pretreatment and the vacuum drying differed in fructan retention (p ≤ 0.05). Moreover, the dried product, osmotically pretreated, presented a shorter drying time. The best condition was vacuum drying at 60 ºC, preceded by pulsed vacuum osmotic dehydration that resulted in fructan retention of approximately 38% in a quicker, higher diffusivity and lighter color product concerning the other tested conditions.

Research background. There is a growing interest in foods with added nutritional value and extended shelf life. This study investigates the use of infrared technology in the drying of banana slices to improve their stability and quality by minimizing moisture content and water activity. Experimental approach. The drying experiments were carried out at a temperature of 70 °C, using the following pretreatments: ultrasound-assisted (UA) immersion in water for 20 and 30 min, osmotic dehydration (OD) and ultrasound-assisted osmotic dehydration (UAOD) for 20, 30 and 40 min. The osmotic process consisted of immersing the samples in the isomaltulose solution (40.0 g/100 g deionized water) for 60 min. Results and conclusions. All mathematical models used to describe the drying process showed a good fit with high R² values (>0.98) and low value of the relative mean error E (%), the sum of squared error and the root mean squared error. The Fick’s diffusion coefficient (Deff) was higher for the samples previously treated with ultrasound for 20 and 30 min. The ultrasonic treatment resulted in shorter drying times with a reduction in average time of up to 29 %. OD was not efficient in reducing drying time, resulting in samples with lower drying rates. The samples treated with ultrasound showed less isotropic shrinkage and better color parameters. The osmotic process resulted in samples with greater rehydration capacity. Novelty and scientific contribution. The impregnation of a carbohydrate with low glycemic index in banana slices was achieved by the osmotic pretreatment, resulting in a new food product with attractive nutritional properties. This advancement represents not only a significant step in the development of functional foods, but also a major innovation in terms of processing technologies. The OD was combined with infrared drying, a method known for its superior drying rates, high heat transfer coefficient and energy efficiency. The synergy of these promising techniques not only shortens the processing times but also ensures more uniform dehydration of food products, resulting in end products that not only maintain but also optimize their nutritional value. These advances offer innovative solutions to improve food quality and also minimize environmental impact through low-energy technologies such as ultrasound and infrared treatment.