29 September 2021 in Critical Reviews in Food Science and Nutrition
The immersion of food in a hypertonic solution results in an osmotic dehydration process (OD) with the loss of water (WL) from the food to the solution and the gain of solids from the solution (SG) by the food. For this reason, OD is commonly used to produce semi-dehydrated or enriched foods by incorporation. Although the most of OD studies are focused on the WL and SG processes, many publications addresses the physicochemical and nutritional changes resulting from OD in the food matrix and in the osmotic solution. Such changes must be handled in order to improve the quality of the product. This work is a compilation of publications with this approach.
1 August 2024 in Food Technology and Biotechnology
Research background. There is a growing interest in foods with added nutritional value and extended shelf life. This study investigates the use of infrared technology in the drying of banana slices to improve their stability and quality by minimizing moisture content and water activity. Experimental approach. The drying experiments were carried out at a temperature of 70 °C, using the following pretreatments: ultrasound-assisted (UA) immersion in water for 20 and 30 min, osmotic dehydration (OD) and ultrasound-assisted osmotic dehydration (UAOD) for 20, 30 and 40 min. The osmotic process consisted of immersing the samples in the isomaltulose solution (40.0 g/100 g deionized water) for 60 min. Results and conclusions. All mathematical models used to describe the drying process showed a good fit with high R² values (>0.98) and low value of the relative mean error E (%), the sum of squared error and the root mean squared error. The Fick’s diffusion coefficient (Deff) was higher for the samples previously treated with ultrasound for 20 and 30 min. The ultrasonic treatment resulted in shorter drying times with a reduction in average time of up to 29 %. OD was not efficient in reducing drying time, resulting in samples with lower drying rates. The samples treated with ultrasound showed less isotropic shrinkage and better color parameters. The osmotic process resulted in samples with greater rehydration capacity. Novelty and scientific contribution. The impregnation of a carbohydrate with low glycemic index in banana slices was achieved by the osmotic pretreatment, resulting in a new food product with attractive nutritional properties. This advancement represents not only a significant step in the development of functional foods, but also a major innovation in terms of processing technologies. The OD was combined with infrared drying, a method known for its superior drying rates, high heat transfer coefficient and energy efficiency. The synergy of these promising techniques not only shortens the processing times but also ensures more uniform dehydration of food products, resulting in end products that not only maintain but also optimize their nutritional value. These advances offer innovative solutions to improve food quality and also minimize environmental impact through low-energy technologies such as ultrasound and infrared treatment.
27 October 2024 in Journal of Sensory Studies
12 March 2024 in Research Square
JCJefferson Luiz Gomes Corrêa
Jefferson Luiz Gomes Corrêa
ASArlley de Brito Magalhães Sousa
Arlley de Brito Magalhães Sousa
PSPaula Giarolla Silveira
RCRenata Nepomuceno da Cunha
Renata Nepomuceno da Cunha
The dual-stage sugar substitution (D3S) method was used to incorporate isomaltulose into banana slices. In the first stage of the technique, native fruit sugars were partially removed and, in the second, isomaltulose, a carbohydrate with a low glycemic index, was incorporated into the banana slices. Ultrasonic energy was applied to one or both stages in order to evaluate its influence on the process. Samples subjected to ultrasonic waves (40 kHz) in both stages presented greater water losses (10.007 ± 0.554%) and greater solids gains (4.809 ± 0.195%). The D3S process resulted in longer drying times of the banana slices. The mathematical models used to describe the drying process showed good adjustment, with emphasis on Midilli's (R² > 0.999). The application of the D3S method without ultrasound energy resulted in dried samples with greater longitudinal shrinkage, radial shrinkage, shrinkage coefficient and greater differentiation in terms of color compared to the other treatments. The use of ultrasonic energy in both stages of the method results in better physicochemical characteristics of the final product. Samples subjected to the D3S process showed a lower rehydration capacity.