Niculae Negurescu

Prof. Dr. Niculae Negurescu

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 November 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
Alexandru CernatAlexandru Cernat
Alexandru Cernat
CPConstantin Pana
Constantin Pana
NNNiculae Negurescu
Niculae Negurescu
Gheorghe LazaroiuGheorghe Lazaroiu
Gheorghe Lazaroiu
CNCristian Nikolaos Nutu
Cristian Nikolaos Nutu
DFDinu Fuiorescu
Dinu Fuiorescu
Considering the current environmental restrictions, particularly those imposed on fossil fuel exploitation, hydrogen stands out as a very promising alternative for the power and transportation sectors. This paper investigates the effects of the employment of hydrogen in a K9K automotive diesel engine. Experiments were conducted at a speed of 2000 min−1 with various engine load levels of 40%, 55%, 70%, and 85%; several quantities were monitored to evaluate the performance with hydrogen use in terms of brake-specific energetic consumption (BSEC), fuel economy, maximum pressure, and heat-release characteristics. It was found that at 55% engine load, the engine efficiency increased by 5.3% with hydrogen addition, achieving a diesel fuel economy of 1.32 kg/h. The rate of increase of the peak pressure and maximum pressure started to increase as a consequence of the higher fuel quantity that burned in the premixed combustion phase, while still remaining within reliable operational limits. The accelerated combustion and augmented heat release rate resulted in a combustion duration that was reduced by 3° CA (crank angle degree), achieving a mass fraction burned percentage of 10% to 90% earlier in the cycle, and the combustion variability was also influenced. Hydrogen use assured the decrease of CO2, HC, NOx, and smoke emission levels in comparison with classic fueling.

28 December 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
Alexandru CernatAlexandru Cernat
Alexandru Cernat
CPConstantin Pana
Constantin Pana
NNNiculae Negurescu
Niculae Negurescu
Gheorghe LazaroiuGheorghe Lazaroiu
Gheorghe Lazaroiu
CNCristian Nikolaos Nutu
Cristian Nikolaos Nutu
Hydrogen can be a viable alternative fuel for modern diesel engines, offering benefits on efficiency and performance improvement. The paper analyses the results of a thermodynamic model developed by authors in order to study the influence of Hydrogen addition on a process like vaporization, mixture forming, and combustion at the level of diesel fuel droplets. The bi-zonal model is applied for a dual-fueled diesel engine K9K type designed by Renault for automotives. For the engine operating regime of 2000 rpm speed and 55% engine load, the diesel fuel is partially substituted by Hydrogen in energetic percents of 6.76%, 13.39%, and 20.97%, the engine power being maintained at the same level comparative to classic fueling. At Hydrogen addition, the diesel fuel jets atomization and diesel fuel droplets vaporization are accelerated, the speed of formation of the mixture being increased. Comparative to classic fueling, the use of Hydrogen leads to diesel droplets combustion intensification, with a shortened autoignition delay, reduction of combustion duration, and increase of flame radius.

21 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
CSCristian Claudiu Sandu
Cristian Claudiu Sandu
CPConstantin Pana
Constantin Pana
NNNiculae Negurescu
Niculae Negurescu
Gheorghe LazaroiuGheorghe Lazaroiu
Gheorghe Lazaroiu
Alexandru CernatAlexandru Cernat
Alexandru Cernat
CNCristian Nikolaos Nutu
Cristian Nikolaos Nutu
Butanol has good combustion properties and it can be a viable alternative fuel for automotive spark ignition engines due to its ability to improve energy and pollution performance. This paper analyses the influence of butanol content in gasoline blends on engine operation with a focus on operation stability, thermal efficiency and emissions. A Cielo Nubira A15MF engine type with four cylinders and a 1.5 L displacement was turbocharged and it was fueled with butanol in a blend with gasoline in percent’s of 10% vol. and 15% vol. An operation regime of 2500 1/min speed and 55% engine load was used, at different dosages, at which the engine power remained constant. Regarding the engine fueled with butanol in a blend with gasoline, the operation stability was improved, especially when lean dosages were used; the dosages at which the thermal efficiency was higher are comparative to classic fueling. Concerning the use of lean dosages, the combustion duration decreases and the energetic engine performance was improved when butanol was used comparative to gasoline. When butanol was used, polluting emissions and emission with a greenhouse effect were reduced. The sharp reduction in NOx is highlighted in this paper.

23 July 2024 in Heliyon
Verified
Journal Article
Open access
SRSilviu Rotaru
Silviu Rotaru
CPConstantin Pana
Constantin Pana
NNNiculae Negurescu
Niculae Negurescu
Alexandru CernatAlexandru Cernat
Alexandru Cernat
CNCristian Nikolaos Nutu
Cristian Nikolaos Nutu
Gheorghe LazaroiuGheorghe Lazaroiu
Gheorghe Lazaroiu
The main objective of the paper is to reveal a few aspects related to combustion quality of a diesel engine fueled in diesel-gas mode with diesel fuel and compressed natural gas. The total amount of heat released per cycle will be higher when the engine is fueled in dual-fuel mode due to higher LHV and because of the gaseous state of CNG. For low and medium loads the total quality of heat released per cycle will increase with 10 % and for higher loads it will reach levels with 25 % higher. The heat release rate of the preformed mixture will double its value for low and medium loads and will reach thresholds up to 3.5 times higher (interval −15; −5°CA); admitting CNG into cylinder will help the preformed mixture to reach stoichiometric values and thus improving the fast combustion phase. Fueling the engine in dual fuel mode with diesel fuel and CNG will have a negative effect on the maximum heat release rate; there will be a 10 % drop in maximum HRR for low loads when the energetic substitution coefficient reaches 36 % and 14 % at high loads when the xc is 26 %. The gaseous state and a higher LHV of CNG will have a good impact on indicated mean effective pressure for all studied regimes when the engine is fueled in DG mode: for low and medium loads 30 % and for high loads 20 % increase will be recorded. Gaseous state of CNG will lead to a higher percentage of preformed mixture and thus the fast combustion phase will extend for longer periods for all studied regimes when the engine is fueled in DG mode (20 % longer for low and medium loads and 30 % for high loads). The diffusive combustion phase will become shorter due to a lower quantity of the main dose when CNG is injected into the intake manifold (10–15 % shorter for low loads and 7 % at high loads).

10 August 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
RGRareș Georgescu
Rareș Georgescu
CPConstantin Pana
Constantin Pana
NNNiculae Negurescu
Niculae Negurescu
Alexandru CernatAlexandru Cernat
Alexandru Cernat
CNCristian Nikolaos Nutu
Cristian Nikolaos Nutu
CSCristian Claudiu Sandu
Cristian Claudiu Sandu
In a world with severe pollution regulations and restrictions imposed to internal combustion engines, improving efficiency and reducing pollutant emissions and greenhouse gases are important goals for researchers. A highly effective method to achieve the premises written above is to use alternative fuels, which may have a strong influence on combustion processes in spark ignition engines. In order to increase the heat release rate during combustion, the brake thermal efficiency, and to decrease the levels of pollutant emissions and greenhouse gases, the use of sustainable alternative fuels, in parallel with conventional fuels is a great choice. Among alternative fuels, hydrogen is an excellent fuel in terms of its physical-chemical properties, making it an attractive replacement for classic fuels in the combustion process. This article demonstrates AMESim 13.0.0/Rev13 theoretical and experimental investigations conducted on a supercharged spark ignition engine at 55% engine load and 2500 rpm speed, analyzes the effect of 2.15% hydrogen that substitutes gasoline on combustion, implicitly investigates energy and fuel efficiency of the engine and investigates pollutant and greenhouse gas emission levels. These experimental investigations confirm the theoretical study of thermo-gas-dynamic processes of a SI engine fueled with gasoline and hydrogen, and it shows the importance of engine tunings and hydrogen quantity on engine operation. The obtained results indicate the advantages of fueling the engine with both gasoline and hydrogen: the increase of the heat release rate which leads to the increase of maximum pressure and maximum pressure rise rate during combustion, the increase of the brake thermal efficiency, the decrease of the combustion duration, the decrease of the brake specific energetic consumption by 4.8%, the decrease of the levels of pollutant emissions by 11.11% for unburned hydrocarbons HC, by 12.5% for monoxide carbon CO, by 63.23% for nitrogen oxides NOx, and by 33.7% for carbon dioxide CO2 as a greenhouse gas. Further research directions can be developed from this research for other operating regimes and other hydrogen quantities.

19 November 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
APAndreea Panait
Andreea Panait
CPConstantin Pana
Constantin Pana
Alexandru CernatAlexandru Cernat
Alexandru Cernat
NNNiculae Negurescu
Niculae Negurescu
CNCristian Nikolaos Nutu
Cristian Nikolaos Nutu
LNLiviu NEMOIANU
Liviu NEMOIANU
The use of hydrogen in the diesel engine automotive can be a viable and sustainable solution through which to reduce carbon-based emissions for the same operating regimens, without major constructive modifications of the engine. The use of hydrogen in the automotive diesel engine constitutes an efficient solution for controlling its operation with low carbon-based emissions and with reduced energetic specific consumption. This way, the requirements of the EC’s Green Deal policy can be met without major costs. Substitution of fossils fuels with hydrogen ensures the reduction of the carbon content of the air–fuel mixture in the engine cylinder, with favourable influences on the processes of the air–fuel mixture formation and combustion, making it possible to reduce carbon-based emissions. The improvement of the combustion process due to hydrogen use leads to the reduction in carbon-based emissions. For the experimental investigations carried on an automotive diesel engine with 1.5 L by displacement, the authors highlighted the following results: a reduction in smoke emissions by over 22%, a reduction in unburned hydrocarbon emissions by over 25%, and a reduction in carbon dioxide by about 20%, even from the use of relatively low cyclic doses of hydrogen at a usual engine load compared with a standard engine. The authors also obtained an 18.5% increase in the level of nitrogen oxides in the partial load engine, even with the use of small amounts of hydrogen added to the intake air; this is a disadvantage, but by applying specific measures, this emission can be reduced. The increase in the homogeneous air–fuel mixture with the use of hydrogen and the combustion processes’ duration time were reduced due to the high combustion flame speed of hydrogen comparative to diesel fuel; this ensures a reduction in energetic specific consumption and an increase in thermal efficiency.