An Upflow Anaerobic Sludge Blanket reactor combined with a two-stage membrane bioreactor were operated for 193 days in order to evaluate the biological removal of carbamazepine (CBZ) from low-strength municipal wastewater. The system worked in three different organic load stages (0.7 ± 0.1 kg COD·m−3·d−1, 0.4 ± 0.1 kg COD·m−3·d−1 and 0.1 ± 0.0 kg COD·m−3·d−1) to assess the impact of the influent OLR on operational parameters such as anaerobic and aerobic sludge retention time (SRT), acidity, volatile fatty acids (VFAs), biomass activity or biogas production. The highest carbamazepine removals were achieved during the anaerobic stage (UASB reactor), reaching averages of 48.9%, 48.0% and 38.2% operating at high, medium and low OLR, respectively. The aerobic treatment (MBR) served as post-treatment, improving the removals, and the global UASB-MBR system reached averages of 70.0%, 59.6% and 49.8% when the influent was at medium and low OLR, respectively. The results demonstrate the potential of combined biological systems on the removal of recalcitrant pharmaceuticals.
This study examines the removal of micropollutants (MPs) in a hybrid process that combines anaerobic and aerobic redox conditions under different Organic Loading Rates (OLRs). A laboratory-scale pilot-plant composed of an Upflow Anaerobic Sludge Blanket reactor (UASB) combined with a membrane bioreactor (MBR) was operated. Six MPs were analyzed: the hormones estrone, 17-α-ethinyl estradiol and 17-β-estradiol, the plasticizer bisphenol A and the pharmaceuticals carbamazepine and diclofenac. In order to study its influence on removal efficiencies, the system was operated at three different OLRs: high (0.67 ± 0.15 kg COD/m3 d), medium (0.37 ± 0.06 kg COD/m3 d) and low (0.11 ± 0.02 kg COD/m3 d). The results demonstrated the synergistic effects due to the double biological treatment, with removal rates above 90% for the hormones and the plasticizer. Pharmaceuticals were the most resistant compounds, being only partially removed in the liquid phase. Removal rates of the MPs were higher at high OLR of the influent.
1 April 2021 in Journal of Water Process Engineering
This research focuses on the application of respirometric techniques to provide new insights into the biokinetic behaviour of bacterial species developed in an Upflow Anaerobic Sludge Blanked -UASB reactor combined with a membrane bioreactor -MBR, treating urban wastewater with emerging contaminants frequently found in this kind of effluents. The lab-scale pilot plant was operated at different metabolic and operational conditions by limiting the organic loading rate- OLR of the influent. In a first stage, the MBR was performed with suspended biomass, while in a second stage bio-supports were introduced to operate coexisting suspended and fixed biomass. From the results of the microscopic monitoring of sludge, it was concluded that the decrease in OLR resulted in a greater disintegration of the floc structure, more dispersed growth, and a low presence of inter-floccular bonds. However, no effect of toxicity or inhibition of microorganisms caused by the presence of emerging contaminants -ECs was determined. Kinetic modelling was carried out to study the behaviour of the system. The results showed a slowing down of biomass degradative capacity at low OLR stages and operating at low temperatures of mixed liquor. In addition, a decrease in oxygen consumption was observed with decreasing biodegradable substrate, resulting in lower degradation of organic matter. Mean values of specific oxygen uptake rate and heterotrophic biomass yield at low OLR were SOUR end = 1.49 and 1.15 mg O2· g MLVSS-1 h-1 and YH,MLSSV end = 0.48 and 0.28 mg MLVSS· mg COD-1substrate at stage 1 (suspended biomass) and stage 2 (suspended and supported biomass), respectively. From the analysis of the endogenous decomposition constant (kd), a higher cell lysis was determined operating with suspended biomass (kd = 0.03 d-1) in comparison to the operation coexisting suspended and supported biomass (kd = 0.01 d-1). Heterotrophic biomass yield values (YH, MLVSS = 0.48 ± 0.06, 0.40 ± 0.01 and 0.29 ± 0.01 mg MLVSS· mg COD-1substrate at high, medium and low OLR) showed lower sludge production at low OLR due to the influence of substrate limitation on cell growth.
This research focuses on the removal of emerging contaminants (CEC) present in synthetic aqueous matrices. Azole compounds were selected as CEC of interest due to their persistence and toxicity, particularly the triazole and oxazole groups. These compounds are also trace contaminants listed in the proposed revision of Directive 91/271/EEC on urban wastewater treatment and the 3rd European Union Observation List (Implementing Decision EU 2020/116), highlighting their regulatory importance. The draft Directive includes the implementation of quaternary treatments to achieve the highest possible removal rates of micropollutants. Among the technologies used on a large scale are some advanced oxidation processes (AOP), often combined with adsorption on activated carbon (AC). Laboratory-scale pilot plants have been designed and operated in this research, including UV photolysis and oxidation with H2O2 and adsorption with GAC. The results demonstrate that UV photolysis is able to remove all the selected CECs except fluconazole, reaching eliminations higher than 86% at high doses of 31.000 J/m2. Treatment by H2O2 achieved removals of 4 to 55%, proving to be ineffective in the degradation of persistent compounds when acting as a single technology. Adsorption by AC is improved with longer contact times, reaching removals above 80% for benzotriazole and methyl benzotriazole at short contact times, followed by sulfamethoxazole and tebuconazole. Fluconazole had a mean adsorption capacity at low contact times, while metconazole and penconazole showed low adsorption capacities.