The transition towards a circular economy, as outlined in the European Union’s Green Deal, requires the development of industries dedicated to recycling and material recovery. Within this context, the recycling of plastic and packaging waste is critical in reducing greenhouse gas emissions. Traditional pick-and-place systems encounter significant challenges when applied to heterogeneous waste streams due to the variability in shape, weight, and material properties of the processed materials. To address these challenges, this research proposes a heuristic to optimize the use of multiple gripper systems within a multirobot multigripper sorting setup, with the goal of both maximizing sorting efficiency and recovery rates in PPW recycling. Therefore, the performance of grippers on specific PPW objects, materials and shapes is quantitatively assessed by measuring the grasp efficiency. This grasp efficiency is incorporated into the proposed scheduling heuristic and used to assign the PPW objects to the different available robots, taking into account the position of the object with respect to the robot and the gripper installed on the robot. This heuristic is then evaluated and benchmarked through simulations considering the sorting system design and the waste stream composition based on a real-world portable robotic material recycling facility. The findings demonstrate substantial improvements in picking efficiency of up to 3.6% and pick rates up to 37.5%, underscoring the potential of advanced heuristic algorithms in robotic waste sorting systems. Future work will focus on refining gripper designs and exploring predictive algorithms to further enhance grasp success rates.
This paper highlights the state of the art in Cooperative Dual-Manipulation (CDM) and Cooperative Multi-Manipulation (CMM), comparing advances in modeling, control, planning, sensing, vision, and end-effector technologies. Methods originally established in CDM have been extended or adapted to support higher complexity of CMM. A historical timeline visualizes the steady growth of cooperative manipulation (CM) and the recent acceleration of CMM driven by rising process complexity and the need for more flexible automation strategies. CM is becoming increasingly relevant as industrial processes demand higher payload capacity, larger workspaces, and greater flexibility. In addition, this paper categorizes existing applications by cooperation type and application domain. Here, a clear dominance of simultaneous object manipulation tasks is visible (fixation-fixation). However, fixation-tooling tasks, where one manipulator grasps the product while another performs a tool operation, and tooling-tooling tasks, where multiple manipulators perform tool operations simultaneously, remain significantly underrepresented. A similar imbalance is found for rigid/non-deformable object manipulation and flexible/deformable object manipulation, respectively. Based on this review, several research gaps are identified: (i) reliable flexible object manipulation methods; (ii) CM strategies for disassembly (e.g., battery pack deconstruction); (iii) complexity in control and planning for multi-manipulator systems; (iv) pathways to industrial deployment beyond laboratory demonstrators; and (v) task-specific tooling and end-effector innovation.