Providing adequate protection of metal materials is still a real challenge, which seems to be a twice as hard task, not only because of technical problems but also because of the requirements including the ecological aspect of the proposed solutions. Interesting alternatives to traditionally used paint coatings are undoubtedly UV-curable varnishes. Due to a number of advantages, among which the reduction of volatile organic compounds emissions or the renewable nature of the raw materials used for their production should be brought up, UV varnishes are relevant to classify them to so-called green chemistry. This article contains a brief description of the types and functions of individual components used in UV-curing formulas. The cross-linking mechanisms of such coatings were presented. A short review of the current state of the art in the field of obtaining new components for UV formulas and scientific reports on cross-linked protective coatings, including anti-corrosive ones, has been prepared. A tabular data presentation of UV-cured materials dedicated to application on metal substrates, which are currently commercially available was created. The synergic growth in the number of publications on the above matter and the constantly increasing register of UV raw materials suggest that in the coming years – due to its high attractiveness – this area will continue to gain in popularity.
22 April 2024 in Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements
The effect of pigments and additives on the resistance of organic binders to cyclic changes in temperature, humidity, and UV radiation intensity was investigated. The study involved paints based on two binders used in polyurethane paints, pigmented in various shades of yellow, red, and blue. Both the binders and pigments differed in their weather resistance. The color stability, gloss, water contact angle, and surface energy of the coatings were assessed. Changes in color and gloss depended primarily on UV radiation, while decorative properties depended on the type of pigments in each color group. Smaller changes in color and gloss were caused by changes in humidity and temperature, without the contribution of UV radiation. The more weather-resistant pigmentation protected the binder from degradation, as confirmed by FT-IR.