In this study, Hybrid Renewable Power System (HRPS) has been designed to meet the energy requirement of Istanbul Gedik University Vocational School (IGUVS) in an optimum way. The energy requirement will be achieved mainly with wind and solar power generation system. The hybrid regenerative power system will be requested from the network when it can’t meet its energy needs. The optimum configuration of grid-connected solar/wind hybrid power generation system will be determined by considering the wind speed data and solar radiation data of the location of IGUVS. Moreover, sensitivity analysis will be carried out taking into consideration the wind speed and solar radiation values. If the optimum hybrid power generation system specified is used, the carbon emission values obtained will be examined.
25 September 2020 in IEEE Transactions on Power Delivery
The Technology development and rising standards of living are increasing the demand for electricity in city centres. In addition, the density of electric power in different areas of a city changes with the construction of new residential areas. Variation in load density can be managed by adjusting the voltage on distribution lines, installing new lines and transformer centres, and reconfiguring existing lines and transformer centres. In this study, the Istanbul Uskudar District of Kanlica-Cubuklu Region was examined and coverage areas were modified depending on the load density and power of the existing transformers. A novel systematic approach to determine the coverage area of transformers is presented. In this approach, the coverage area and overlap of each transformer with its neighbours were determined. Subsequently, transformers that are under-used or have significant overlap with neighbouring transformers were removed from the network. The transformers were placed into an optimal structure in the network by distributing the load of an excluded transformer to its nearest neighbours. This approach further allows the minimum route for the high voltage distribution wiring between transformers and cost to be determined.
Today, there is a need to expand the network of fast charging stations to encourage the use of Electric Vehicles (EV). Fast charging stations are considered mobile loads, unlike conventional electric loads. This situation brings problems in electrical distribution systems. In addition, there will be problems caused by short circuits that occur for any reason in the networks to which EVs are connected. Considering the concerns about what these problems may be and how they may be reflected in the network, it is inevitable to examine the optimal positioning of the EV on the distribution network and its possible short-circuit effects. In this study, in the Istanbul/Vanikoy pilot region, HV/LV distribution feeders and substations in the region were selected using the distribution company infrastructure. An algorithm was created using multiple location data to determine the optimal locations of one-phase and three-phase Electric Vehicle Fast Charging Stations (EVFCS) on the distribution network. Simulation of short circuit types of the system was carried out using real-time technical data such as location data of distribution transformers, power data, load density, number and length of feeders, system protection, and control element data, based on optimal locations. The effects of short circuit types on the electricity distribution network, depending on the load density of residences, other structures, and optimally located urban EVFCS, connected to the distribution transformer feeders, were analyzed.
Today, as the demand for energy increases based on the increasing population and improving technology, resorting to new energy sources has become a necessity. Due to the rapid consumption of fossil fuels and the responsibility of humanity for the environment, Renewable Energy Sources (RES) are of a quality that may respond to this necessity. But the RES such as sun and wind vary depending on the weather conditions. Considering such variance, Hybrid Power Systems (HPS) are suggested in order to assure reliability and continuity in energy generation. For the sake of strengthening the HPS that are dependent on weather conditions, it is considered to increase the system's reliability and continuity through the inclusion in the HPS of cattle biomass reserves in the area. In this paper, it was studied on modeling of HPS based on sun, wind and biogas that will meet the electric power demand of the cattle farm located at Afyonkarahisar, Turkey. The two decades' animal population and load value changes were estimated through Genetic Algorithm (GA), and the HPS model was investigated under different scenarios considering sustainable energy and environment objectives, and the analyses were performed considering the changes in economic parameters.
The need for clean energy has accelerated energy production by using Renewable Energy Sources (RES) in marine vessels. With the developments in solar energy technology, the use of various simulation programs to analyze the performance predicted of Photovoltaic (PV) systems is increasing. In this study, 12 month solar radiation data belonging to 12 different points in a specific region of the Marmara Sea were used for prediction. The Artificial Neural Network (ANN) model was trained by dividing it into training, validation and test data sets at a ratio of 70-15-15 and the performance of the model was obtained with average Mean Squared Error 0.00098 and Regression 0.99997. The predicted values were used in PV power system modeling for a marine vessel and the system performance was analyzed with HOMER, SAM, RETScreen, PVSOL, PVsyst, PVWatts and PVGIS simulation programs. 16.8 kW capacity PV power system was created for the optimum design. When the results are examined, it is seen that the maximum production is obtained from HOMER with 23193 kW, but it is the most expensive in terms of cost, and it is determined that an average of 20771 kW of energy is produced throughout the year from the simulation programs, an annual decrease of 45.01 kg in SO2 emissions and 18166 kg in CO2 emissions is achieved. In addition, a decrease of 0.2542 USD is observed in energy costs. This study contributes to the literature in optimizing the use of RES in moving platforms and comparing the programs.
The energy required by marine vessels worldwide is mostly provided by using fossil fuels. Due to the depletion of fossil fuels day by day., causing environmental pollution and climate change., various measures have been taken in this direction worldwide., including the search for alternative solutions in marine vehicles. The need for environmentally friendly., economical and clean energy has accelerated the energy production in marine vessels with Renewable Energy Sources (RES). Solar energy., which is one of the RES., is one of the most preferred resources to be used among the RES because it is accessible everywhere in the world. In this study., Artificial Neural Networks (ANN) method is used to predict the solar radiation values in a region whose borders are determined on the Marmara Sea. PV power system modeling was created using the HOMER program on a marine vessel modeled with the values obtained from ANN., and technical and economic analysis of the electrical energy generation and storage of the marine vessel during the year was carried out and recommendations were presented. In this way., it has been tried to bring a new approach to electricity generation by maximizing the benefit of solar radiation in moving marine vehicles.