Laccases enzymes have garnered significant research interest owing to their extensive applications in pollutant degradation, the food industry, and biosensing technologies. These green biocatalysts are distinguished by the presence of four copper active sites which are integral to their enzymatic functions. Recent advancements have led to the development of copper-based organic–inorganic nanocomposites as laccase mimetics. Hence, this study focused on the synthesis and study of the catalytic properties of a copper–gallic acid metal–organic framework (Cu–GA MOF) heterostructure as a laccase mimic. Using o-phenylenediamine (OPD) and norepinephrine as model substrates it was observed that the synthesized Cu–GA MOF exhibited a laccase-like catalytic performance. Similar to natural enzymes and other nanozymes, Cu–GA MOF demonstrated pH-dependent catalytic activity demonstrating an optimal performance under physiological conditions. It exhibited a superior Michaelis constant (Km) of 0.06 mM, maximum reaction rate (Vmax) of 4.1 × 10−3 mM min−1 and superior recyclability compared with laccase at the same mass concentration. Remarkably, Cu–GA MOF displayed exceptional thermal tolerance maintaining substantial catalytic activity at temperatures up to 90 °C. In contrast to natural enzymes, Cu–GA MOF exhibited enhanced stability and recyclability underscoring its potential for diverse bio-applications. These findings highlight the promising role of Cu–GA MOF as a robust and versatile catalyst in biocatalytic and analytical applications.
Portable analytical platforms are rapidly transforming point-of-care chemical analysis by enabling fast, on-site measurements with minimal instrumentation, reduced cost, and simplified operation. Among emerging approaches, smartphone-assisted sensing systems have attracted considerable attention due to their accessibility, integrated imaging capabilities, and potential for quantitative analysis without sophisticated laboratory equipment. In this study, a smartphone-based colorimetric sensing platform is developed for sensitive and selective glucose determination using bimetallic cobalt-nickel co-modified graphitic carbon nitride (Co-Ni/g-C3N4) nanoparticles as efficient peroxidase-mimicking nanozymes. The Co-Ni/g-C3N4 nanocomposite was synthesized through a hydrothermal-assisted reduction method and characterized by SEM, HRTEM, EDX, FTIR, and XRD, confirming successful incorporation of Co and Ni within the g-C3N4 structure. The sensing strategy relies on an enzyme-nanozyme cascade reaction in which glucose oxidase converts glucose to gluconic acid, producing hydrogen peroxide that is subsequently utilized by the Co-Ni/g-C3N4 nanozyme to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine, generating a blue color signal proportional to glucose concentration. The color intensity was recorded using a smartphone camera and quantitatively analyzed through RGB extraction with ImageJ software. Under optimized conditions, the platform exhibited linear detection ranges of 10-500 µM (UV-Vis) and 10-300 µM (smartphone analysis) along with low detection limits, high sensitivity, and excellent selectivity toward glucose against common interferents. The smartphone-based measurements showed strong agreement with conventional UV-Vis results, demonstrating the reliability of the portable approach. This simple and cost-effective sensing system highlights the potential of integrating bimetallic g-C3N4 nanozymes with smartphone colorimetry for decentralized glucose monitoring and point-of-care biochemical analysis.