Portable analytical platforms are rapidly transforming point-of-care chemical analysis by enabling fast, on-site measurements with minimal instrumentation, reduced cost, and simplified operation. Among emerging approaches, smartphone-assisted sensing systems have attracted considerable attention due to their accessibility, integrated imaging capabilities, and potential for quantitative analysis without sophisticated laboratory equipment. In this study, a smartphone-based colorimetric sensing platform is developed for sensitive and selective glucose determination using bimetallic cobalt-nickel co-modified graphitic carbon nitride (Co-Ni/g-C3N4) nanoparticles as efficient peroxidase-mimicking nanozymes. The Co-Ni/g-C3N4 nanocomposite was synthesized through a hydrothermal-assisted reduction method and characterized by SEM, HRTEM, EDX, FTIR, and XRD, confirming successful incorporation of Co and Ni within the g-C3N4 structure. The sensing strategy relies on an enzyme-nanozyme cascade reaction in which glucose oxidase converts glucose to gluconic acid, producing hydrogen peroxide that is subsequently utilized by the Co-Ni/g-C3N4 nanozyme to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine, generating a blue color signal proportional to glucose concentration. The color intensity was recorded using a smartphone camera and quantitatively analyzed through RGB extraction with ImageJ software. Under optimized conditions, the platform exhibited linear detection ranges of 10-500 µM (UV-Vis) and 10-300 µM (smartphone analysis) along with low detection limits, high sensitivity, and excellent selectivity toward glucose against common interferents. The smartphone-based measurements showed strong agreement with conventional UV-Vis results, demonstrating the reliability of the portable approach. This simple and cost-effective sensing system highlights the potential of integrating bimetallic g-C3N4 nanozymes with smartphone colorimetry for decentralized glucose monitoring and point-of-care biochemical analysis.
26 December 2025 in Analytical and Bioanalytical Chemistry
Monitoring phosphate (PF) levels is critically significant because of its environmental, biomedical, and agricultural importance. In the current study, a novel dual-mode sensing platform was developed based on iron-doped nitrogen-rich carbon quantum dots (Fe@N-dCQDs), which exhibit both strong photoluminescence and intrinsic peroxidase mimetic activity. This dual property was the basis of PF determination, where its presence induced a concentration-dependent decrease in both colorimetric absorbance and fluorescence intensity, allowing for label-free and sensitive detection. The Fe@N-dCQDs were prepared using one-step pyrolysis and characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), energy-dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR). The developed sensor showed excellent linearity in both detection modes (0.33–23.67 mM for the colorimetric method and 5.0–50.0 mM for the fluorometric method) with low detection limits (0.13 mM and 1.72 mM) and high correlation coefficients (0.9947 and 0.9998). Moreover, the sensor exhibited remarkable selectivity against common interfering ions typically found in environmental matrices, including phosphatic fertilizers. This simple, rapid, and cost-effective sensing strategy provides a promising tool for PF determination in environmental and agricultural samples and establishes Fe@N-dCQDs as a versatile nanomaterial for dual-mode analytical applications. Graphical Abstract
3 October 2024 in Sustainable Chemistry and Pharmacy