Electromagnetically induced transparency (EIT) has been realized in atomic systems, but fulfilling the EIT conditions for artificial atoms made from superconducting circuits is a more difficult task. Here we report an experimental observation of the EIT in a tunable three-dimensional transmon by probing the cavity transmission. To fulfill the EIT conditions, we tune the transmon to adjust its damping rates by utilizing the effect of the cavity on the transmon states. From the experimental observations, we clearly identify the EIT and Autler-Townes splitting (ATS) regimes as well as the transition regime in between. Also, the experimental data demonstrate that the threshold determined by the Akaike information criterion can describe the EIT-ATS transition better than the threshold given by the EIT theory.
This paper proposes a scheme and design of a cryogenic multiplexing control chip (MCC), which enables one microwave cable to control many superconducting qubits. Designed based on an adjustable inductor, the MCC is a nonreciprocal device that generates microwave signals between 4 and 8 GHz and constructs a control circuit to operate qubits. The effects of filters, isolators, power splitters, qubits, and load impedance on the MCC are analyzed in the frequency-domain simulation. And in the time-domain simulation, the response time, Gaussian pulses, single sideband, amplitude, and frequency compensation of the MCC are examined. The MCC can be integrated with the superconducting qubits on the same package at the 20-mK temperature stage with insertion loss of dB and isolation of dB. The time-domain simulation has revealed that the output specific microwave pulses of the MCC can be used for driving the superconducting qubits with crosstalk of about dB. This is much less than dB of the physical requirements on crosstalk, which can meet fidelity on single-qubit (99.92%) and two-qubit gates (99.40%). The power dissipation for each qubit control is less than 1 pW. The MCC can greatly reduce the number of microwave control lines and is beneficial to the development of a large-scale superconducting quantum processor.
10 January 2022 in Journal of Superconductivity and Novel Magnetism
Photodetectors can convert light energy into electrical signals, so are widely used in photovoltaics, photon counting, monitoring, and imaging. Photodetectors are easy to prepare high-resolution photochips because of their small size unit integration. However, these photodetector units often exhibit poor photoelectric performance due to material defects and inadequate structures, which greatly limit the functions of devices. Designing modification strategies and micro-/nanostructures can compensate for defects, adjust the bandgap, and develop novel quantum structures, which consequently optimize photovoltaic units and revolutionize optoelectronic devices. Here, this paper aims to comprehensively elaborate on the surface/interface engineering scheme of micro-/nano-photodetectors. It starts from the fundamentals of photodetectors, such as principles, types, and parameters, and describes the influence of material selection, manufacturing techniques, and post-processing. Then, we analyse in detail the great influence of surface/interface engineering on the performance of photovoltaic devices, including surface/interface modification and micro-/nanostructural design. Finally, the applications and prospects of optoelectronic devices in various fields such as miniaturization of electronic devices, robotics, and human–computer interaction are shown.