Joseph Scalia

Prof. Joseph Scalia

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2022 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
PDF file
ANAnna Norris
Anna Norris
NANeelufar Aghazamani
Neelufar Aghazamani
JSJoseph Scalia
Joseph Scalia
CSCharles D. Shackelford
Charles D. Shackelford
The hydraulic performance of geosynthetic clay liners (GCLs) comprising anionic polymer–enhanced bentonites (EBs), or EB-GCLs, based on permeation with 500 mM NaCl and 167 mM CaCl2 at an average effective stress of 27 kPa and hydraulic gradients of ∼300 was evaluated. The EBs included powdered sodium bentonite (NaB) enhanced with one of seven anionic polymers, including linear, noncrosslinked poly(acrylic acid) (PA) with low, medium, and high molecular weights, sodium carboxymethylcellulose (CMC) with either low viscosity or high viscosity, a covalently crosslinked sodium polyacrylate, and an in situ polymerized bentonite polymer composite. The NaB was enhanced with polymer at mass loadings of 5%, 8%, or 10% using dry-sprinkling, dry-mixing, and/or wet-mixing methods. Hydraulic conductivity tests at a low hydraulic gradient (∼35 ) also were conducted to determine the effect of seepage forces. Overall, the hydraulic performance of the EB-GCLs to the NaCl solution was better than that to the CaCl2 solution. Dry sprinkling (DS) with PA generally provided the best hydraulic performance, with hydraulic conductivity values based on permeation with 500 mM NaCl and 167 mM CaCl2 of 1.3×10−11 and 4.0×10−11  m/s , respectively, for the high-molecular-weight PA added at 5% via DS and 2.9×10−11 and 4.7×10−11  m/s , respectively, for the medium-molecular-weight PA added at 8% via DS. The CMC viscosity grade did not affect the hydraulic conductivity of the EB-GCLs. All EB-GCLs eluted polymer during permeation, regardless of mixing method or polymer type. Polymer elution was correlated with preferential interaggregate flow paths in multiple EB-GCL specimens, indicating the importance of polymer retention in maintaining low hydraulic conductivity of EB-GCLs. Because standard termination criteria for the measurement of the hydraulic conductivity of conventional unenhanced GCLs (e.g., as per current ASTM standards) do not address the potential impact of polymer elution from EB-GCLs, caution should be exercised when adapting these criteria to measure the hydraulic conductivity of EB-GCLs such as those evaluated in this study.

1 April 2017 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
JSJoseph Scalia
Joseph Scalia
CBCraig H. Benson
Craig H. Benson
The impact of entraining water-soluble polyacrylate eluted from a bentonite-polyacrylate composite (BPC) in sodium bentonite (Na-bentonite) was evaluated as a means to achieve low hydraulic conductivity to aggressive CaCl2 solutions that reduce interlayer swell in conventional Na-bentonite. Up to 73% of the polymer initially contained within BPC (28.5% polymer by mass) was soluble and elutable polyacrylate. This polymer fouled pores that would typically conduct the bulk of flow in Na-bentonite permeated with aggressive CaCl2 solutions (≥50 mM CaCl2). Similar fouling was observed with kaolinite and low-plasticity clay combined with BPC, but not fine sand or nonplastic silt combined with BPC. Granular mixtures of Na-bentonite blended with BPC had hydraulic conductivity to 50 mM CaCl2 as much as 1,500 to 6,700 times lower than Na-bentonite alone. Blends of granular Na-bentonite and granular BPC with as little as 1% BPC had hydraulic conductivities lower than BPC alone when permeated with 50 mM CaCl2...

1 January 2020 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
CFCameron J. Fritz
Cameron J. Fritz
JSJoseph Scalia
Joseph Scalia
CSCharles D. Shackelford
Charles D. Shackelford
MMMichael A. Malusis
Michael A. Malusis
Significant research conducted over the last 20 years has shown that engineered clay barriers for chemical containment applications can behave as semipermeable membranes that restrict the migration of aqueous-phase chemicals (solutes), thereby enhancing the containment function of the barriers. The ability of such clays to restrict solute migration is characterized by a membrane efficiency coefficient, ω , that typically ranges from zero for no solute restriction (i.e., no membrane behavior) to unity for complete solute restriction (0≤ω≤1 ). Measurement of ω for such clays requires an estimate of the maximum chemico-osmotic pressure difference across the clay, Δπ . To date, estimates of Δπ and ω have been determined almost exclusively using the van’t Hoff equation, which is based on the difference in the molar concentrations of simple salts (e.g., KCl and NaCl) in electrolyte solutions bounding the clay specimen. However, the van’t Hoff equation is limited by the assumption that the electrolyte solutions are ideal (i.e., infinitely dilute), such that some error typically is incurred when the van’t Hoff equation is used to estimate Δπ and ω for real (nonideal) electrolyte solutions. Therefore, the purposes of this paper are to describe the use of the more fundamental method for estimating Δπ and ω based on the differences in water (H2O ) activity and to quantify the error associated with the use of the van’t Hoff equation in determining ω . The results indicate that the error in the calculated ω based on the use of the van’t Hoff equation relative to the use of the water activity method is ≤9.3% for KCl or NaCl concentrations less than ∼2  M . Also, previously reported values of ω for bentonite-based membranes based on the van’t Hoff equation were reevaluated using the water activity method. The resulting error in ω based on the use of the van’t Hoff equation was ≤8.0% , and the ω resulting from the use of the van’t Hoff equation was more conservative (lower) than that based on the use of water activity, resulting in a slight underestimate of the effect of ω on transport.

1 March 2020 in Waste Management
Verified
Journal Article
Closed access
CBChristopher Bareither
Christopher Bareither
CBCraig H Benson
Craig H Benson
EREmily M. Rohlf
Emily M. Rohlf
JSJoseph Scalia
Joseph Scalia

1 October 2020 in Environmental Geotechnics
Verified
Journal Article
Closed access
MMMichael A Malusis
Michael A Malusis
JSJoseph Scalia
Joseph Scalia
ANAnna S Norris
Anna S Norris
CSCharles D Shackelford
Charles D Shackelford
The significance of chemico-osmosis on solute transport through clay barriers exhibiting membrane behaviour was investigated by conducting coupled solute transport model simulations in which the effect of chemico-osmosis was either included or omitted. Results show that percentage reductions in solute flux (P RF) through a clay barrier increase with increasing membrane efficiency coefficient, ω; decreasing Péclet number, P e (representing the relative importance of advection to diffusion); and increasing osmotic number, N π (representing the relative importance of chemico-osmosis to diffusion). Predicted P RF values under diffusion-dominated conditions (P e = 0·01) based on experimental data reported for bentonite barriers in contact with monovalent salt solutions (0·015 ≤ ω ≤ 0·73; 0·049 ≤ N π ≤ 0·30) ranged from 3·8 to 74% when the effect of chemico-osmosis was omitted (i.e. by setting N π = 0). When the effect of chemico-osmosis was included, P RF increased by 0·5–10%, indicating that chemico-osmosis has only a minor influence on solute transport in bentonite barriers exhibiting N π ≤ 0·30.

1 September 2017 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
JSJoseph Scalia
Joseph Scalia
CBCraig H. Benson
Craig H. Benson
WAWilliam H. Albright
William H. Albright
BSBenjamin S. Smith
Benjamin S. Smith
XWXiaodong Wang
Xiaodong Wang
A case study is presented describing the effects of age (14 years) and differential settlement (≈0.3 m vertical over ≈0.4 m horizontal along a horizontal distance of ≈10 m) on the engineering properties of a soil barrier layer, a geosynthetic clay liner (GCL), and a geomembrane within a composite cover. Samples of the soil barrier layer had hydraulic conductivity below the design requirement of 5.0×10−7  m/s , except in areas that were cracked because of differential settlement. Tests showed that the geomembrane exceeded design specifications for tensile yield strength (≥22.9  kN/m ) and elongation at tensile yield (≥13.0% ), and current standard specifications for oxidative induction time (≥100  min ) and stress crack resistance (≥500  h ). Geomembrane seams also exceeded design specifications for peel strength (≥15.9  kN/m ) and shear strength (≥22.9  kN/m ). Geosynthetic clay liner samples showed a reduction in swell index relative to the as-built condition (from 27.9 to 21.0–24.5  mL/2  g ) because of cation exchange. However, all GCL samples had hydraulic conductivity below the design requirement of 4×10−11  m/s .