The subject matter of this study is algorithms for measuring the components of an aircraft speed vector and altitude. The goal of this study is to improve algorithms for processing wideband stochastic pulse signals in helicopter low-altitude and flight-speed radio systems by introducing secondary signal processing based on artificial intelligence elements. The tasks to be solved are as follows: to develop an optimal algorithm for determining the speed and altitude of flight for a helicopter radio complex; to supplement the signal processing algorithm with an artificial intelligence-based processor to determine the "safety" of the current trajectory; provide the pilot with relevant information about possible options for further actions based on an analysis of the current position of the helicopter and flight parameters; and to analyse the efficiency of the proposed complex when using various artificial intelligence-based algorithms. The methods used are as follows: methods of mathematical statistics and optimal solutions for solving problems of statistical synthesis of active radio complex structure; methods of machine learning; and methods of computer simulation. The following results were obtained. The algorithms for signal processing in a helicopter radio complex are obtained by the method of maximum likelihood, and the use of three radio channels to calculate the full vector of speed and altitude is argued. The structure of a secondary information processing system, using algorithms based on artificial intelligence is proposed. The effectiveness of determining the safety of the current landing trajectory using various algorithms based on artificial intelligence (LinearSVC, GaussianNB, DecisionTreeClassifier, RandomForestClassifier, KNeighborsClassifier, MLPClassifier and RidgeClassifier) was analysed. Conclusions. The simulation results show that in the presence of accurate (noise-free) information on the current location of the helicopter, its axial velocities, and a map of the terrain with defined areas dangerous for landing, the DecisionTreeClassifier and RandomForestClassifier algorithms can provide a high probability of correctly determining the safety of the current landing trajectory. At the same time, in the presence of instability in the measurements of helicopter movement parameters, only the RandomForestClassifier algorithm maintains high accuracy.
This manuscript focuses on the process of measuring the angular positions of radio sources using radio engineering systems. This study aims to improve the accuracy of measuring the angular positions of sources that radiate functionally determined signals and to expand the range of the unambiguous operation angles for multi-antenna radio direction finders. To achieve this goal, the following tasks were addressed: (1) defining the models of signals, noise, and their statistical characteristics, (2) developing the theoretical foundations of statistical optimization methods for measuring the angular positions of radio sources in multi-antenna radio direction finders, (3) optimizing the structures of radio direction finders with different configurations, (4) analyzing the accuracy and range of the unambiguous measurement angles in the developed methods, and (5) conducting experimental measurements to confirm the main results. The methods used are based on the statistical theory of optimization for remote sensing and radar systems. For the specified type of signals, given by functionally deterministic models, a likelihood function was constructed, and its maxima were determined for different multi-antenna direction finder configurations. The results of statistical synthesis were verified through simulation modeling and experiments. The primary approach to improving measurement accuracy and expanding the range of unambiguous angles involves combining antennas with different spatial characteristics and optimally integrating classical radio direction-finding methods. The following results were obtained: (1) theoretical studies and simulation modeling confirmed the existence of a contradiction between high resolution and the width of the range of the unambiguous measurements in two-antenna radio direction finders, (2) an improved signal processing method was developed for a four-antenna radio direction finder with a pair of high-gain and a pair of low-gain antennas, and (3) to achieve maximum direction-finding accuracy within the unambiguous measurement range, a new signal processing method was synthesized for a six-element radio receiver, combining processing in two amplitude direction finders and one phase direction finder. This work provides a foundation for further theoretical studies, highlights the specifics of combining engineering measurements in direction-finding systems, and offers examples of rapid verification of new methods through computer modeling and experimental measurements.
6 December 2023 in RADIOELECTRONIC AND COMPUTER SYSTEMS
The subject of this study is the algorithms for measuring the angular positions of radio emission sources. The goal of this study is to develop an improved algorithm for signal processing in amplitude direction finders that will provide several unambiguous measurement angles at high steepness of the discrimination characteristic by combining measurements of systems with different widths of antenna patterns. The task: to develop an optimal signal processing algorithm for a four-antenna amplitude direction finding system, two antennas of which have a wide radiation pattern and the other two have a narrow one; to test the overall performance of the resulting algorithm by simulating the direction finder; to develop and conduct a study of an experimental model of a four-antenna direction finder, which includes two antennas with wide radiation patterns, two antennas with narrow radiation patterns, radio frequency paths, and a signal processing unit that implements the developed algorithm; to analyze the effectiveness and features of the application of the developed algorithm, and to compare the results of simulation modeling and experimental research. The methods used are statistical methods and optimal solutions for solving problems of statistical synthesis of signal processing algorithms in passive radio systems, computer simulation modeling methods, and experimental research methods. The following results were obtained. The algorithm for signal processing in a four-antenna direction finding system was synthesized using the maximum likelihood method. By simulation modeling, the overall effectiveness of measurement integration in multi-antenna amplitude direction finders was confirmed, and the peculiarities of the synthesized algorithm application were revealed, namely, the need to introduce additional proportionality coefficients into the measurement channels. During the experimental studies of the developed model of the direction finder, the results of the simulation modeling were confirmed. Conclusions. To determine the direction of radiation sources by amplitude direction finders, it is advisable to simultaneously use systems with wide and narrow antenna patterns, the measurements of which are combined by the proposed algorithm. This makes it possible to simultaneously expand the range of unambiguous measurement angles and increase the accuracy of measurements within the equal-signal zone. The disadvantage of using the algorithm is the nonlinear form of the obtained discrimination characteristics and the need to determine additional proportionality coefficients heuristically.
У статті представлено концепцію створення прототипу бортового радара, що випромінює безперервні сигнали з лінійно-частотною модуляцією у W-діапазоні хвиль та реалізує метод синтезування апертури антени. Обґрунтовано вибір робочої частоти радара з урахуванням атмосферних вікон прозорості та доступності елементної бази українського виробництва. Запропоновано інженерне рішення щодо формування широкосмугового сигналу з лінійною частотною модуляцією (ЛЧМ сигналу) із використанням генератора, що керується напругою, схеми фазового автопідлаштування частоти і частотного помноження на лавинних діодах. Наведено структурні схеми основних блоків радара із синтезованою апертурою (РСА): передавача, гетеродину та приймача. Описано принцип роботи схеми цифрової обробки сигналів для побудови високоточних радіозображень. Проведено експериментальну перевірку працездатності прототипу на реальних дистанціях. Показано відповідність отриманих результатів теоретичним оцінкам, що підтверджує придатність запропонованого рішення для застосування у складі малогабаритних бортових радіолокаційних систем.
27 August 2025 in Aerospace technic and technology
This study focuses on the principles of the construction and implementation of a simulation model for image formation in synthetic aperture radars (SAR). Particular attention is given to the reproduction of the physical processes occurring during the processing of reflected signals and the construction of a spatial representation of the radar scene. This study aims to develop a simulation model of image formation in SAR that enables a visual representation and analysis of the main stages of signal processing, the study of various factors affecting image quality, and the verification of image formation algorithms under complex observation conditions. Objectives: The physical and mathematical principles of SAR operation are analyzed. The main components of the model are identified and corresponding mathematical descriptions are constructed. A simulation model including modules for signal generation, scene reflection, platform motion modeling, and signal processing is implemented. Typical radar observation scenarios are simulated considering the spatial configuration of the scene. The results are evaluated and the advantages and limitations of the developed model are determined compared to analytical methods. Methods: The study employs a combination of analytical, numerical, and simulation methods. The construction of the mathematical model is based on the application of electrodynamics equations, the Huygens-Fresnel principle, Ito stochastic integrals, and the system’s point spread function as a means of spatial filtering. Simulation modeling was performed in the MATLAB environment, considering the characteristics of coherent reception, spectral signal processing, platform motion compensation, and spatial convolution with the ambiguity function. Statistical approaches were also used to describe image noise components (speckle noise) for reliable modeling of natural underlying surfaces. Results: The study presents a structural scheme of the SAR image formation simulation model, which implements all key stages – from probing pulse generation to two-dimensional scene image processing and formation. Examples of simulated observation of test objects, including point and extended targets, are provided. The influence of probing signal parameters, imaging geometry, and scene characteristics on positioning accuracy and resolution was analyzed. The model demonstrates fundamental effects typical for SAR, particularly aperture synthesis due to platform motion and sidelobe formation. The obtained results can be used for educational purposes, algorithm verification, and preliminary SAR system performance evaluation under various scenarios.
This paper presents a statistically grounded algorithm for surface imaging with linear frequency-modulated continuous wave synthetic aperture radar. The approach is based on the maximum likelihood principle, where solving the optimization problem naturally leads to the introduction of a spectral decorrelation filter. The proposed method increases the effective number of statistically independent samples, reduces speckle, and improves the accuracy of radar cross section estimation. Simulation experiments demonstrate consistent advantages over classical SAR processing: the proposed method achieves up to a 21% improvement in feature similarity metrics and an average 4% improvement across standard quantitative image quality measures.