In the present study, strain-rate and temperature dependence of the transverse tensile failure mode of unidirectional heat-resistant carbon fiber-reinforced plastics is numerically simulated by finite element analyses. In the analyses, interface failure and matrix failure are represented by cohesive zone modeling and continuum damage mechanics, respectively. For the continuum damage mechanics, Christensen's failure criteria of multi-axial stress states for each strain rate are applied to the matrix properties. Interfacial properties which are obtained by microbond test are introduced into cohesive zone modeling. A time-temperature superposition principle approach is applied in order to translate the difference in temperature as the difference in strain rate. The damage initiation depends on strain rate and temperature, while the cohesive zone modeling is assumed to be temperature- and time-independent. The initial damage starting points and the failure mode are predicted in numerical analysis. The transverse tensile strengths in analysis results are compared with the three-point bending testing results.

Fatigue failure of carbon fiber-reinforced plastics (CFRPs) under cyclic loadings has attracted the attention of researchers recently. In this study, the entropy-based failure criterion is proposed to investigate the fatigue lifetime of unidirectional CFRPs subjected to multiple-amplitude cyclic loadings. Due to the heterogeneity of CFRPs, a micro-finite element model considering matrix resin and fibers independently is developed, and the entropy-based damage criterion is implemented into a user-subroutine of Abaqus to model the progressive damage of matrix resin. The fatigue lifetime of CFRPs under typical loading sequences consisting of two stages, such as varying from low to high (L-H) or from high to low (H-L) loading sequence, is estimated with the proposed failure criterion. Numerical results show that the initial damage occurs near the area between two fibers, and a transverse crack propagates progressively under the cyclic loading. The difference in predicted lifetime to final failure in L-H and H-L stress levels is 6.3%. Thus, the effect of loading sequence on the fatigue lifetime can be revealed via the proposed entropy-based damage criterion. Comparisons with the conventional linear cumulative damage (LCD) and kinetic crack growth (KCG) theories are also conducted to demonstrate the validity of the proposed method. The entropy-based failure criterion is a promising method to predict the residual strength and fatigue lifetime of CFRP components.

Recycling carbon-fiber-reinforced plastics (CFRPs) is crucial for sustainable material utilization, particularly in aerospace applications, where large quantities of prepreg waste are generated. This study investigated the mechanical properties of highly oriented recycled CFRP (rCFRP) molded using vacuum-assisted resin transfer molding (VaRTM), wet-layup, and traditional RTM methods. Recycled carbon fibers (rCFs) obtained via solvolysis and pyrolysis were processed into nonwoven preforms to ensure fiber alignment through carding. The influence of molding methods, fiber recycling techniques, and fiber orientation on mechanical performance was examined through tensile tests, fiber volume fraction (Vf) analysis, and scanning electron microscopy observations. The results indicated that the solvolysis-recycled rCF exhibited superior interfacial adhesion with the resin, leading to a higher tensile strength and stiffness, particularly in the RTM process, where a high Vf was achieved. Wet-layup molding effectively reduced the void content owing to autoclave curing, maintaining stable properties even with pyrolyzed rCF. VaRTM, while enabling vacuum-assisted resin infusion, exhibited a higher void content, limiting improvements in mechanical performance. This study highlights that tailoring the molding method according to the desired performance, such as increasing stiffness potential by enhancing Vf in RTM or improving tensile strength by improving fiber–matrix adhesion in wet-layup molding, is critical for optimizing rCFRP properties, providing important insights into sustainable CFRP recycling and high-performance material design.