Contaminants of emerging concern (CECs) pose a potential risk to human and environmental health. Microalgae bioremediation is a promising approach for transforming or removing contaminants from the environment, while contributing to the circular economy. In this study, Nannochloropsis sp. was effectively used for the simultaneous removal of six CECs: paracetamol, ibuprofen, imidacloprid, methylparaben and bisphenol A at 10 µg mL−1 and triclosan at 0.5 µg mL−1 from synthetic wastewater, which were able to survive under such concentrations, higher than those commonly found in the environment (up to 2.82 µg mL−1 of methylparaben). High removal efficiencies were reached for methylparaben (100%) and bisphenol A (93 ± 2%), while for imidacloprid, paracetamol and ibuprofen, 30 ± 1%, 64 ± 2% and 49 ± 5% were removed, respectively. Subsequently, lipids were extracted, and the FAME profile was characterised using GS-MS. The main fatty acids identified after bioremediation were hexadecadienoic acid isomers (C16:2), palmitic acid (C16), linoleic acid (C18:2) and γ-linolenic acid (C18:3). The absence of oleic acid and stearic acid was noticed, suggesting an alteration in the lipidic profile due to contaminant exposure. By exploring the quantification of fatty acids in future work, potential applications for the extracted lipids can be explored, further demonstrating the feasibility of this circular process.
Optical frames are used worldwide to correct visual impairments, protect from UV damage, or simply for fashion purposes. Optical frames are often made of poorly biodegradable and fossil-based materials, with designs not targeted to everyone’s tastes and requirements. Additive manufacturing processes allow personalisation of optical frames and the use of new sustainable biomaterials to replace fossil-based ones. This comprehensive review combines an extensive survey of the scientific literature, market trends, and information from other relevant sources, analysing the biomaterials currently used in additive manufacturing and identifying biomaterials (biopolymers, natural fibres, and natural additives) with the potential to be developed into biocomposites for printing optical frames. Requirements for optical devices were carefully considered, such as standards, regulations, and demands for manufacturing materials. By comparing with fossil-based analogues and by discussing the chemical, physical, and mechanical properties of each biomaterial, it was found that combining various materials in biocomposites is promising for achieving the desirable properties for printing optical frames. The advantages of the various techniques of this cutting-edge technology were also analysed and discussed for optical industry applications. This study aims to answer the central research question: which biopolymers and biocomposite constituents (natural fibres, plasticisers, and additives) have the ideal mechanical, thermal, physical, and chemical properties for combining into a biomaterial suitable for producing sustainable, customisable, and inclusive optical frames on demand, using additive manufacturing techniques.
Optical frames are used worldwide to correct visual impairments, protect from UV damage, or simply for fashion purposes. Optical frames are often made of poorly bio-degradable and fossil-based materials, with designs not targeted to everyone´s tastes and requirements. Additive manufacturing processes allow personalisation of optical frames and the use of new sustainable biomaterials to replace fossil-based ones. This comprehensive review combines an extensive survey of the scientific literature, market trends, and information from other relevant sources, analysing the biomaterials currently used in additive manufacturing and identifying biomaterials (biopolymers, natural fibres and natural additives) with the potential to be developed into biocomposites for printing optical frames. Requirements for optical devices were carefully considered, such as standards, regulations and demands for manufacturing materials. By comparing with fossil-based analogues, and by discussing the chemical, physical and mechanical properties of each biomaterial, it was found that combining various materials in bio-composites is promising for achieving the desirable properties for printing optical frames. Advantages of the various techniques of this cutting-edge technology were also analysed and discussed for optical industry applications. This work contributes to identifying a way forward for producing sustainable, customisable and inclusive optical frames on demand, using new biocomposites for ad-ditive manufacturing.