Juliana Araújo

Ms. Juliana Araújo

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 February 2025 in Bioengineering
Verified
Journal Article
Open access
PDF file
BSBruna Santos
Bruna Santos
JAJuliana Araújo
Juliana Araújo
BCBeatriz Carvalho
Beatriz Carvalho
CCCarolina Cotrim
Carolina Cotrim
Raul BernardinoRaul Bernardino
Raul Bernardino
TETelma Encarnação
Telma Encarnação
Contaminants of emerging concern (CECs) pose a potential risk to human and environmental health. Microalgae bioremediation is a promising approach for transforming or removing contaminants from the environment, while contributing to the circular economy. In this study, Nannochloropsis sp. was effectively used for the simultaneous removal of six CECs: paracetamol, ibuprofen, imidacloprid, methylparaben and bisphenol A at 10 µg mL−1 and triclosan at 0.5 µg mL−1 from synthetic wastewater, which were able to survive under such concentrations, higher than those commonly found in the environment (up to 2.82 µg mL−1 of methylparaben). High removal efficiencies were reached for methylparaben (100%) and bisphenol A (93 ± 2%), while for imidacloprid, paracetamol and ibuprofen, 30 ± 1%, 64 ± 2% and 49 ± 5% were removed, respectively. Subsequently, lipids were extracted, and the FAME profile was characterised using GS-MS. The main fatty acids identified after bioremediation were hexadecadienoic acid isomers (C16:2), palmitic acid (C16), linoleic acid (C18:2) and γ-linolenic acid (C18:3). The absence of oleic acid and stearic acid was noticed, suggesting an alteration in the lipidic profile due to contaminant exposure. By exploring the quantification of fatty acids in future work, potential applications for the extracted lipids can be explored, further demonstrating the feasibility of this circular process.

8 November 2023 in Materials
Verified
Journal Article
Open access
PDF file
MSMargarida G Santos
Margarida G Santos
JAJuliana Araújo
Juliana Araújo
CHRISLAURA BELLINI DO CARMOCHRISLAURA BELLINI DO CARMO
CHRISLAURA BELLINI DO CARMO
Leonardo Kleman SantosLeonardo Kleman Santos
Leonardo Kleman Santos
Maria Filomena BotelhoMaria Filomena Botelho
Maria Filomena Botelho
ASAbilio Sobral
Abilio Sobral
BODIPYs are bicyclic aromatic compounds with unique spectroscopic, photophysical, and chemical properties. This study aimed to find BODIPYs with characteristics biocompatible with human cell lines for possible use as imaging agents. Six BODIPY derivatives were synthesised with groups linked to boron, fluorine, phenol, or catechol, resulting in compounds with different physicochemical characteristics. NMR, absorption, and emission spectroscopy and mass spectrometry were subsequently used to characterise them. Afterwards, the biocompatibility of these compounds was evaluated using MTT, SRB, and cellular uptake assays in A549 and H1299 cell lines. Furthermore, a haemolysis assay was performed on human blood cells. To summarise the main results, BODIPYs 1 to 4 showed considerable fluorescence. In contrast, BODIPYs 5 and 6 showed very weak fluorescence, which could be related to the presence of the catechol group and its quenching properties. Regarding biocompatibility, all compounds had metabolic activity and viability above 80% and 70%, respectively. BODIPYs 3 and 6 presented the most consistent data, demonstrating good uptake and, in general, haemolytic activity below 25%. In conclusion, the cytotoxic effects of the compounds were not considerable, and the presence of cyclic alkoxides in BODIPYs 3 and 6 may introduce exciting features that should be highlighted for dual imaging for BODIPY 3 due to its fluorescence or for radioactive labelling in the case of both BODIPYs.

12 June 2024 in Dyes and Pigments
Verified
Journal Article
Closed access
CHRISLAURA BELLINI DO CARMOCHRISLAURA BELLINI DO CARMO
CHRISLAURA BELLINI DO CARMO
JAJoseany M.S. Almeida
Joseany M.S. Almeida
JAJuliana Araújo
Juliana Araújo
CBChristopher Brett
Christopher Brett
MBMaria Filomena Botelho
Maria Filomena Botelho
ASAbílio J.F.N. Sobral
Abílio J.F.N. Sobral

4 November 2025 in Research Square
Verified
Preprint
Open access
PDF file
JAJuliana Araújo
Juliana Araújo
PRPedro Ramos
Pedro Ramos
ESElsa Silvestre
Elsa Silvestre
AMArtur Mateus
Artur Mateus
AMAnabela Massano
Anabela Massano
TETelma Encarnação
Telma Encarnação
The ophthalmic industry's eyewear lens production generates substantial waste during the lens grinding processes, contributing to significant environmental challenges. This process consumes approximately 20 litres of water per eyeglass lens pair, which is subsequently discharged directly into wastewater systems, releasing a complex mixture of pollutants, including micro and nanoplastics, into the environment. It is important to identify the quantity and nature of this neglected waste stream to determine whether it contributes significantly to plastic pollution and releases hazardous contaminants. This requires detailed characterisation. For this purpose, this study investigates the wastewater generated by lens grinding machines in opticians and provides a detailed physical and chemical characterisation of this waste stream. The results revealed a significant material loss during grinding, with approximately 50% of each initial lens mass being discharged during cutting. Based on conservative estimates, 11.6 million lenses are ground annually, representing an estimate of 5,800 tonnes of plastic waste released into the environment each year.A variety of hazardous contaminants, including particles below 2 µm, heavy metals, bisphenol A, phthalates, and fluorinated compounds, were also identified. The presence of these substances raises significant concerns as they are known endocrine-disrupting chemicals and persistent organic pollutants, posing a significant risk to aquatic ecosystems and human health.This study provides new, valuable information to alert the opticians, competent authorities, policy makers, and society to developing future policies and alternative materials and waste management strategies within the ophthalmic industry.

21 January 2026 in Macromol
Verified
Journal Article
Open access
PDF file
BCBeatriz Carvalho
Beatriz Carvalho
FSFátima Santos
Fátima Santos
JAJuliana Araújo
Juliana Araújo
BSBruna Santos
Bruna Santos
JLJoão Carlos Alhada Lourenço
João Carlos Alhada Lourenço
TETelma Encarnação
Telma Encarnação
Optical frames are used worldwide to correct visual impairments, protect from UV damage, or simply for fashion purposes. Optical frames are often made of poorly biodegradable and fossil-based materials, with designs not targeted to everyone’s tastes and requirements. Additive manufacturing processes allow personalisation of optical frames and the use of new sustainable biomaterials to replace fossil-based ones. This comprehensive review combines an extensive survey of the scientific literature, market trends, and information from other relevant sources, analysing the biomaterials currently used in additive manufacturing and identifying biomaterials (biopolymers, natural fibres, and natural additives) with the potential to be developed into biocomposites for printing optical frames. Requirements for optical devices were carefully considered, such as standards, regulations, and demands for manufacturing materials. By comparing with fossil-based analogues and by discussing the chemical, physical, and mechanical properties of each biomaterial, it was found that combining various materials in biocomposites is promising for achieving the desirable properties for printing optical frames. The advantages of the various techniques of this cutting-edge technology were also analysed and discussed for optical industry applications. This study aims to answer the central research question: which biopolymers and biocomposite constituents (natural fibres, plasticisers, and additives) have the ideal mechanical, thermal, physical, and chemical properties for combining into a biomaterial suitable for producing sustainable, customisable, and inclusive optical frames on demand, using additive manufacturing techniques.

8 September 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
BCBeatriz Carvalho
Beatriz Carvalho
FSFátima Santos
Fátima Santos
JAJuliana Araújo
Juliana Araújo
BSBruna Santos
Bruna Santos
JLJoão Carlos Alhada Lourenço
João Carlos Alhada Lourenço
TETelma Encarnação
Telma Encarnação
Optical frames are used worldwide to correct visual impairments, protect from UV damage, or simply for fashion purposes. Optical frames are often made of poorly bio-degradable and fossil-based materials, with designs not targeted to everyone´s tastes and requirements. Additive manufacturing processes allow personalisation of optical frames and the use of new sustainable biomaterials to replace fossil-based ones. This comprehensive review combines an extensive survey of the scientific literature, market trends, and information from other relevant sources, analysing the biomaterials currently used in additive manufacturing and identifying biomaterials (biopolymers, natural fibres and natural additives) with the potential to be developed into biocomposites for printing optical frames. Requirements for optical devices were carefully considered, such as standards, regulations and demands for manufacturing materials. By comparing with fossil-based analogues, and by discussing the chemical, physical and mechanical properties of each biomaterial, it was found that combining various materials in bio-composites is promising for achieving the desirable properties for printing optical frames. Advantages of the various techniques of this cutting-edge technology were also analysed and discussed for optical industry applications. This work contributes to identifying a way forward for producing sustainable, customisable and inclusive optical frames on demand, using new biocomposites for ad-ditive manufacturing.