The impact of cultivation strategy on the cost of recombinant protein production is crucial for defining cost-effective bioreactor operation conditions. This paper presents a methodology to estimate and compare cost impacts related to utilities as well as medium composition, using simple design equations and accessible data. Data from batch bioreactor cultures were used as case study involving the production of pneumococcal surface protein A, a soluble recombinant protein, employing E. coli BL21(DE3). Cultivation strategies and corresponding process costs covered a wide range of operational conditions, including different media, inducers, and temperatures. The core expenses were related to the medium and cooling. When the price of peptone was above the threshold value of US$ 30/kg, defined medium became the best choice. IPTG and temperatures around 32 °C led to shorter cultures and lower PspA4Pro production costs. The procedure offers a simple, accessible theoretical tool to identify cost-effective production strategies using bioreactors.

The development of biorefineries brings the necessity of an efficient consumption of all sugars released from biomasses, including xylose. In addition, the presence of inhibitors in biomass hydrolysates is one of the main challenges in bioprocess feasibility. In this study, the application of Ca-alginate hybrid gels in the immobilization of xylose-consuming recombinant yeast was explored with the aim of improving the tolerance of inhibitors. The recombinant yeast Saccharomyces cerevisiae GSE16-T18SI.1 (T18) was immobilized in Ca-alginate and Ca-alginate–chitosan hybrid beads, and its performance on xylose fermentation was evaluated in terms of tolerance to different acetic acid concentrations (0–12 g/L) and repeated batches of crude sugarcane bagasse hemicellulose hydrolysate. The use of the hybrid gel improved yeast performance in the presence of 12 g/L of acetic acid, achieving 1.13 g/L/h of productivity and reaching 75% of the theoretical ethanol yield, with an improvement of 32% in the xylose consumption rate (1:1 V_beads/V_medium, 35 °C, 150 rpm and pH 5.2). The use of hybrid alginate–chitosan gel also led to better yeast performance at crude hydrolysate, yielding one more batch than the pure-alginate beads. These results demonstrate the potential of a hybrid gel as an approach that could increase 2G ethanol productivity and allow cell recycling for a longer period.

In spite of the large number of reports on fed-batch cultivation of E. coli, alternative cultivation/induction strategies remain to be more deeply exploited. Among these strategies, it could be mentioned the use of complex media with combination of different carbon sources, novel induction procedures and feed flow rate control matching the actual cell growth rate. Here, four different carbon source combinations (glucose, glycerol, glucose + glycerol and auto-induction) in batch media formulation were compared. A balanced combination of glucose and glycerol in a complex medium formulation led to: fast growth in the batch-phase; reduced plasmid instability by preventing early expression leakage; and protein volumetric productivity of 0.40 g.L^-1.h^-1. Alternative induction strategies were also investigated. A mixture of lactose and glycerol as supplementary medium fully induced a high biomass population, reaching a good balance between specific protein production (0.148 g_prot.g_DCW ^-1) and volumetric productivity (0.32 g.L^-1.h^-1). The auto-induction protocol showed excellent results on specific protein production (0.158 g_prot.g_DCW ^-1) in simple batch cultivations. An automated feed control based on the on-line estimated growth rate was implemented, which allowed cells to grow at higher rates than those generally used to avoid metabolic overflow, without leading to acetate accumulation. Some of the protocols described here may provide a useful alternative to standard cultivation and recombinant protein production processes, depending on the performance index that is expected to be optimized. The protocols using glycerol as carbon source and induction by lactose feeding, or glycerol plus glucose in batch medium and induction by lactose pulse led to rSpaA production in the range of 6 g.L^-1, in short fed-batch processes (16 to 20 h) with low accumulation of undesired side metabolites.