The performance of an in-situ capacitance sensor for on-line monitoring of biomass concentration was evaluated for some of the most important microorganisms in the biotechnology industry: Escherichia coli, Saccharomyces cerevisiae, Pichia pastoris and Bacillus megaterium. A total of 33 batch and fed-batch cultures were carried out in a bench-scale bioreactor and biomass formation trends were followed by dielectric measurements during the growth phase as well as the induction phase, for 5 recombinant E. coli strains. Permittivity measurements and viable cellular concentrations presented a linear correlation for all the studied conditions. In addition, the permittivity signal was further used for inference of the cellular growth rate. The estimated specific growth rates mirrored the main trends of the metabolic states of the different cells and they can be further used for setting-up control strategies in fed-batch cultures

In spite of the large number of reports on fed-batch cultivation of E. coli, alternative cultivation/induction strategies remain to be more deeply exploited. Among these strategies, it could be mentioned the use of complex media with combination of different carbon sources, novel induction procedures and feed flow rate control matching the actual cell growth rate. Here, four different carbon source combinations (glucose, glycerol, glucose + glycerol and auto-induction) in batch media formulation were compared. A balanced combination of glucose and glycerol in a complex medium formulation led to: fast growth in the batch-phase; reduced plasmid instability by preventing early expression leakage; and protein volumetric productivity of 0.40 g.L^-1.h^-1. Alternative induction strategies were also investigated. A mixture of lactose and glycerol as supplementary medium fully induced a high biomass population, reaching a good balance between specific protein production (0.148 g_prot.g_DCW ^-1) and volumetric productivity (0.32 g.L^-1.h^-1). The auto-induction protocol showed excellent results on specific protein production (0.158 g_prot.g_DCW ^-1) in simple batch cultivations. An automated feed control based on the on-line estimated growth rate was implemented, which allowed cells to grow at higher rates than those generally used to avoid metabolic overflow, without leading to acetate accumulation. Some of the protocols described here may provide a useful alternative to standard cultivation and recombinant protein production processes, depending on the performance index that is expected to be optimized. The protocols using glycerol as carbon source and induction by lactose feeding, or glycerol plus glucose in batch medium and induction by lactose pulse led to rSpaA production in the range of 6 g.L^-1, in short fed-batch processes (16 to 20 h) with low accumulation of undesired side metabolites.

Background: Penicillin G acylase (PGA) is used industrially to catalyze the hydrolysis of penicillin G to obtain 6-aminopenicillanic acid. In Escherichia coli, the most-studied microorganism for PGA production, this enzyme accumulates in the periplasmic cell space, and temperature plays an important role in the correct synthesis of its subunits. Results: This work investigates the influence of medium composition, cultivation strategy, and temperature on PGA production by recombinant E. coli cells. Shake flask cultures carried out using induction temperatures ranging from 18 to 28°C revealed that the specific enzyme activity achieved at 20°C (3000 IU gDCW^-1) was 6-fold higher than the value obtained at 28°C. Auto-induction and high cell density fed-batch bioreactor cultures were performed using the selected induction temperature, with both defined and complex media, and IPTG and lactose as inducers. Final biomass concentrations of 100 and 120 gDCW L^-1, and maximum enzyme productivities of 7800 and 5556 IU L^-1 h^-1, were achieved for high cell density cultures using complex and defined media, respectively. Conclusions: To the best of our knowledge, the volumetric enzyme activity and productivity values achieved using the complex medium are the highest ever reported for PGA production using E. coli. Overall PGA recovery yields of 64 and 72% after purification were achieved for crude extracts obtained from cells cultivated in defined and complex media, respectively. The complex medium was the most cost-effective for PGA production, and could be used in both high cell density and straightforward auto-induction protocols.