In this article an assessment of the sediment metal pollution (cadmium, copper, chromium, lead, nickel, zinc) in the Veliki Backi canal (Serbia) was carried out using pseudo-total metal content, contamination factor (CF), pollution load index (PLI) and enrichment factor (EF). The study also encompassed pore-water metal concentrations and an assessment of sediment pollution based on the analysis of simultaneously extracted metals (SEM), acid volatile sulphides (AVS) and the sequential extraction procedure. The concentrations of metals are likely to result in harmful effects based on the comparison with sediment quality guidelines (Dutch, Canadian, US EPA - United States Environmental Protection Agency). The ratio of simultaneously extracted metals and volatile acid sulphides was found to be greater than 1 in only one location, which is already recognized as a place of high risk based on the criteria applied. Other samples had Σ[SEM]/[AVS] < 1, despite their high risk classification based on the applied criteria. According to the sequential extraction procedure, zinc and nickel exhibit high risk in most samples, whereas other metals show low and medium risk. The CF values for Cr, Cu and Zn were > 6 in most samples, which denotes very high contamination by these metals. The PLI values indicated moderate and high pollution. The EF values for all metals studied except for Cd in some cases were >1.5, suggesting anthropogenic impact. The obtained results will be invaluable for future activities regarding sediment monitoring and will facilitate the selection of appropriate criteria when evaluating sediment quality.

In this study, the sorption behaviour of 1,3-benzothiazole (BT) and 2-(methylthio)benzothiazole (MTBT) was investigated on Danube geosorbent under equilibrium and nonequilibrium conditions. All sorption isotherms fitted well with the Freundlich model (R2=0.932-0.993). The results showed that organic matter of the Danube geosorbent has a higher sorption affinity for the more hydrophobic MTBT compared to BT. However, sorption-desorption experiments showed that MTBT was more easily desorbed than BT molecules, which indicates the importance of absorption relative to adsorption in the overall sorption mechanism of MTBT. In general, molecules of BT and MTBT were more easily desorbed in the lower concentration range, which resulted in an increase in the hysteresis indices with increasing concentrations. Column experiments revealed that retention of the investigated compounds on the aquifer material followed the compound?s hydrophobicity. BT showed a lower retention, in accordance with its lower sorption affinity obtained in the static experiments, while MTBT showed a greater sorption affinity, and thus had a longer retention time on the column. Thus during transport BT represent greater risk for groundwaters than MTBT. These results have increased our understanding of benzothiazoles sorption and desorption process which represent one of the most important factors which influence the behaviour of organic compounds in the environment.