Shunzhang Zou

Dr. Shunzhang Zou

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 May 2024 in IEEE Access
Verified
Journal Article
Open access
SZShunzhang Zou
Shunzhang Zou
JZJun Zhang
Jun Zhang
YLYunfeng Liu
Yunfeng Liu
YYYu Yang
Yu Yang
YZYunshan Zhou
Yunshan Zhou
GWGuolin Wang
Guolin Wang
A new dual-motor plug-in hybrid system has been developed in this paper. The system has a variety of operating modes such as "pure electric drive", "series hybrid drive", "parallel hybrid drive", and "pure oil drive", which can maximize fuel efficiency according to the driving conditions of the vehicle and the needs of the driver. By adding high-power on-board chargers and high-capacity lithium-ion battery packs to the system, more electric driving can be achieved. This paper introduces the parameters and performance indexes of the main components of the system, establishes the simulation model of the powertrain, formulates the control strategy, and analyzes the power performance and fuel economy of the system through simulation. The simulation results are as follows: the maximum speed of the vehicle can reach 180.82km/h; the acceleration time of 100 km/h is 7.72s; in the WLTC driving cycle, the fuel consumption of the hybrid power system is 7.648L/100km; the electric driving range is 156.63 km. The simulation results show that the powertrain can reduce fuel consumption while maintaining sufficient power performance, which proves the feasibility and fuel economy potential of the scheme.

3 April 2025 in Electronics
Verified
Journal Article
Open access
PDF file
SZShunzhang Zou
Shunzhang Zou
JZJun Zhang
Jun Zhang
YYYu Yang
Yu Yang
YZYunshan Zhou
Yunshan Zhou
YLYunfeng Liu
Yunfeng Liu
FXFeng Xiaokang
Feng Xiaokang
Appropriate energy management strategy can further improve the fuel economy of plug-in hybrid electric vehicles (PHEV). Rule-based control strategies are dominant in actual vehicles because of their fast calculation and easy implementation. However, incorrect parameter settings and suboptimal control strategies may lead to substantial performance variations, preventing optimal fuel efficiency and emissions reduction. In this paper, the dynamic programming algorithm is implemented to design the control strategy for a dual-motor PHEV. The MATLAB/Simulink environment is used to construct models of the key components and powertrain controller, and simulation platforms for both rule-based and optimization-based strategies are established. Through the calculation results of dynamic programming (DP) algorithm, the rule of working mode switching and torque distribution is analyzed to improve the performance of rule-based control strategy. WLTC driving cycle simulation results show that the improved rule control effectively improves the economy of PHEV, and its comprehensive consumption per 100 km decreases by 2.853%.

21 May 2026 in Energies
Verified
Journal Article
Open access
PDF file
SZShunzhang Zou
Shunzhang Zou
JZJun Zhang
Jun Zhang
YLYunfeng Liu
Yunfeng Liu
YYYu Yang
Yu Yang
YZYunshan Zhou
Yunshan Zhou
GWGuolin Wang
Guolin Wang
To address the conflict between real-time performance and global optimality in the energy management of dual-motor plug-in hybrid electric vehicles (PHEVs), this paper proposes a model predictive control (MPC) strategy based on dynamic programming (DP). Firstly, a radial basis function (RBF) neural network is employed to predict future driving conditions, providing preview information for the MPC. Subsequently, a DP-MPC cooperative architecture is constructed, which invokes DP to solve for local optimal solutions during the receding horizon optimization process and incorporates linear reference SOC trajectory planning to approximate the global optimum. Simulation results under the WLTC driving cycle demonstrate that the fuel consumption of the proposed strategy is 2.311 L/100 km, representing a 33.2% reduction in pure fuel consumption compared to the rule-based (RB) strategy, and a 16.3% reduction in equivalent fuel consumption (including electricity converted to fuel based on the engine’s generation efficiency), while achieving 96.31% of the fuel economy of the global optimal DP strategy. The study validates that this method significantly improves fuel economy while guaranteeing real-time performance.

22 August 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
JZJun Zhang
Jun Zhang
XFXiaokang Feng
Xiaokang Feng
SJShiqi Jiang
Shiqi Jiang
BZBoyu Zhang
Boyu Zhang
SZShunzhang Zou
Shunzhang Zou
To mitigate stall conditions in electric drive motors and improve low-speed dynamic performance of electric vehicles, a design of electric drive transmission by employing the adaptation of a converging-differential hydro-mechanical torque converter configuration is innovatively proposed. The transmission is simple in structure, and has two operating modes of fixed ratio transmission mode and converging-differential hydro-mechanical torque transmission mode. This study conducts a focused analysis of the speed-torque conversion mechanism in the converging-differential hydro-mechanical torque transmission mode, complemented by comprehensive modeling and simulation to evaluate its implementation efficacy in electric vehicle transmission systems. Simulation results demonstrate that equipping this transmission enables significant downsizing of the drive motor power, reducing it from 120 kW (benchmark vehicle specification) to 60 kW while maintaining comparable climbing and acceleration performance. Compared to a vehicle equipped 60 kW motor without this transmission: acceleration performance shows a 17.97% improvement; gradeability has been significantly increased by double; motor efficiency exhibits a 4.91% relative enhancement.

28 September 2026 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
JZJun Zhang
Jun Zhang
SJShiqi Jiang
Shiqi Jiang
XFXiaokang Feng
Xiaokang Feng
BZBoyu Zhang
Boyu Zhang
YLYu Luo
Yu Luo
SZShunzhang Zou
Shunzhang Zou
This paper proposes a novel P2 hybrid transmission scheme integrating a converging-differential hydro-mechanical torque converter. This transmission enables continuous speed and torque regulation, allowing the hybrid system to achieve various operating modes with a single electric machine. A prototype was fabricated and the speed relationships among the sun gear, carrier, and ring gear in the hydro-mechanical torque transmission mode were experimentally validated. A system-level simulation model was established based on the transmission scheme. The simulation results show that, compared with a conventional dual-motor hybrid system, the proposed single-motor scheme achieves most of the required functions while delivering superior low-speed dynamic performance: the 0–50 km/h acceleration time is improved by 67.7%, the 0–100 km/h acceleration time is improved by 31.79%, and the maximum climbing gradient is increased from 0.10 to 0.35. These improvements are accompanied by a slightly higher fuel consumption under the WLTC cycle, while the electric machine count is reduced.