Hongsheng Li

Dr. Hongsheng Li


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2025 in Materials
Verified
Journal Article
Open access
PDF file
HWhaihong wu
haihong wu
CWChuanfeng Wang
Chuanfeng Wang
WXWenhu Xu
Wenhu Xu
WCWeiping Cheng
Weiping Cheng
XKXiao Kang
Xiao Kang
HLHongsheng Li
Hongsheng Li
Marine environment-induced apparatus failures have led to substantial losses in marine engineering. Graphite/copper composites, known for their excellent electrical conductivity and wear resistance, are extensively utilized in various electric contact devices. However, research on the current-carrying friction and wear behavior of graphite/copper composites in marine environments is still limited. This study investigates the effects of mating materials, graphite content (30 wt.% and 45 wt.%), and electric voltage on the friction and wear mechanisms of graphite/copper composites in seawater. The results show that under seawater coupled with electricity, no mass loss was observed in the 30 wt.% graphite composites after friction tests against different counterparts. Electric voltage (3 V) affects the composite’s damage mechanism, inducing delamination wear, arc erosion and accelerating corrosion. Specifically, the electricity factor promotes oxidation recreations while inhibiting chlorine formation. Notably, when the composite is paired with gold-coated copper, it undergoes electrochemical reactions, leading to the formation of needle-like copper oxide. These oxides alter the surface morphology, elevate the mass of worn composites, and raise the friction coefficient of the tribopair to approximately 0.3, an increase from 0.2.

25 December 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
HLHongsheng Li
Hongsheng Li
Wendong LiWendong Li
Wendong Li
NWNenghui Wang
Nenghui Wang
Wendong LiWendong Li
Wendong Li
YZYunyi Zhu
Yunyi Zhu
JYJiayu Ye
Jiayu Ye
With the shift of oil and gas exploitation to deep seas, the 35 kV high-voltage electric slip ring in Single-Point Mooring (SPM) systems faces critical challenges of insulation failure and thermal failure, threatening operational safety. This study aims to investigate its insulation strength and temperature rise characteristics. A three-dimensional electric field model and a magnetic-thermal coupling model considering the skin effect were established using the finite element method (FEM). Simulations were conducted under four high-voltage configurations and various high-current operating conditions, followed by AC breakdown tests and high-current temperature rise experiments for validation. Results show that the maximum electric field (up to 19.53 kV/mm) concentrates at the inlet PTFE bushing, which is the insulation weak point. The maximum temperature rise at the center ring can be predicted by a power-law model. Moreover, simulation results agree well with experimental data, confirming the reliability of the computational studies. This work provides a theoretical and experimental basis for the optimal design and safe operation of high-voltage slip rings in offshore SPM systems.

24 March 2026 in Electronics
Verified
Journal Article
Open access
PDF file
HLHongsheng Li
Hongsheng Li
Wendong LiWendong Li
Wendong Li
NWNenghui Wang
Nenghui Wang
FLFangzhou Lu
Fangzhou Lu
YZYunyi Zhu
Yunyi Zhu
JYJiayu Ye
Jiayu Ye
With the shift of oil and gas exploitation to deep seas, the 35 kV high-voltage electric slip ring in Single-Point Mooring (SPM) systems faces critical challenges of insulation failure and thermal failure, threatening operational safety. This study aims to investigate its insulation strength and temperature rise characteristics. A three-dimensional electric field model and a magnetic–thermal coupling model considering the skin effect were established using the finite element method (FEM). Simulations were conducted under four high-voltage configurations and various high-current operating conditions, followed by AC breakdown tests and high-current temperature rise experiments for validation. The results show that the maximum electric field (up to 19.53 kV/mm) concentrates at the inlet polytetrafluoroethylene (PTFE) bushing, which is the insulation weak point. The maximum temperature rise at the center ring can be predicted by a power-law model. Moreover, simulation results agree well with experimental data, confirming the reliability of the computational studies. This work provides a theoretical and experimental basis for the optimal design and safe operation of high-voltage slip rings in offshore SPM systems.