Spatial variability of material properties might significantly affect the structural performance and reliability of unreinforced masonry (URM) walls. The paper develops a computational method to predict the strength for URM walls subject to one-way horizontal bending considering unit-to-unit spatial variability of the material properties of mortar joints and bricks. In this context, the term unit is being used to describe the location in the wall associated with a single brick and the adjacent mortar joints. In this way, the material properties are assumed to be uniform along the length, height, and thickness of individual bricks but may vary from brick to brick within the wall. Tensile strength, shear bond strength, and associated fracture energies of the mortar joints and tensile strength and fracture energy of the bricks are the main parameters considered herein. The authors examine how correlation and spatial variability in unit strengths (mortar joints and bricks) affect the variability of ul...
Interlaminar shear strength in bamboo composite (BC) is mainly provided by epoxy resin as the matrix in BC. This may greatly change due to humidity. This study aims at evaluating the shear strength of BC by testing and developing probabilistic relationships. The interlaminar shear strength of bamboo composite (BC) in different moisture conditions was tested according to ASTM D2344. The results show that the maximum shear stress does not generally occur at the centroid of samples, which could be associated with imperfections in BC layers. An extreme value theory-based model is suggested to evaluate the probability of shear failure in BC samples. The shear capacity decreased from 20.4 MPa to 14 MPa as the humidity increased from 60% to 90%. A summary of findings is as follows: It was found that under transient moisture conditions, local failure is likely to happen before the first significant crack occurs. Local failure is suggested to be considered in the design for serviceability. Stress drop caused by the local failure could exceed 10% of total shear strength and, therefore, should be regarded as a serviceability design. The probabilistic model developed in this study could be used for developing structural design safety factors.