This paper explains the effects of the annealing temperature on structural and electrical properties of Aluminum (Al) thin films. Al thin films were deposited on glass substrate by thermal vacuum evaporator. The films were then annealed at 100 o , 200 o , 300 o , 400 o , and 500 o C for 1 hour. The surface morphology of Al films after annealing were characterized using atomic force microscope (AFM) and field emission scanning electron microscope (FESEM). The electrical properties were characterized using four point probe. From the results of this experiment, the roughness of Al films gradually decrease from 8.5 nm (before annealing) to 7.7 nm and the grain size gradually increase from 127 nm to 145 nm, when the temperature of annealing increased. The resistivity of the films was also decreased from 2.32 x10-5 ohm.cm to 1.9 x10-5 ohm.cm when the samples were annealed from 100 o to <400 o C that depended on roughness. However, when annealed from 400 o to 500 o C, the resistivity shows dependency on grain size, which result on the increasing of resistivity to 2.77 x10-5 ohm.cm.
1 November 2020 in Materials Chemistry and Physics
Nowadays, health care has turned out to be more technology-oriented. Today's technology is demanded to be practical and easy to use. The number of mobile devices based on the Android operating system has increased significantly based on data. The open-source nature of android helps in programming applications easily according to user requirements. The syringe pump is a medical device that functions to enter the medicinal fluid into the patient's body at a specific dose and time automatically in mL/hour. The syringe pump is generally equipped with an alarm. Alarms have a vital function to provide information to nurses or doctors on duty. Medical officers cannot hear alarms outside the patient monitoring room. This paper aims to design a syringe pump that is equipped with a NodeMCU8266 WiFi module to provide notifications via a smartphone so that nurses or doctors can know the alarm even though they are outside the patient monitoring room. So, this is expected can improve patient safety. In addition, this paper also aims to verify the size of the syringe against the drug flow rate. Based on the test results, the syringe pump can control the drug flow rate with a sensor accuracy of 0.0217 and an error rate of 0.6% at a target volume of 5mL. The syringe pump can also send alarm notifications to smartphones in real-time.