The propeller thrust force is a critical performance factor for UAVs, directly influencing the aircraft’s lift in the air. Various factors, such as propeller design, motor power, and operating conditions, influence thrust force. The propeller type also significantly impacts the thrust produced. It is essential to compare various types of propellers for UAV applications to obtain optimal thrust. This study employs ground testing and theoretical calculations to analyze and enhance propeller performance. Ground testing provides direct measurements of thrust force in controlled conditions, while theoretical study was conducted to predict thrust through mathematical calculations. This research was conducted on two different propellers, investigating variations in engine speed (Rpm). The results demonstrate that propellers A and B produce different amounts of thrust. These results were analyzed by comparing them with the outcomes of theoretical calculations. The experimental results and theoretical calculations show similar trends. However, there are noticeable differences in the thrust produced by both.
22 October 2024 in Jurnal PADE: Pengabdian & Edukasi
Work accidents occur due to several things, namely weak supervision on the project, undisciplined labor in complying with OHS, and inadequate personal protective equipment on the project in terms of quantity and quality. The problem may occur to workers of PT. The method used is by counseling workers from PT.Tukang Bangun Indonesia which was held on Saturday, June 08, 2024 at the PT.Tukang Bangun Indonesia office, Surakarta with a total of 11 participants and participants consisted of office workers and field workers with a more dominant proportion of field workers, this is because field workers have a greater potential for work accidents. The counseling was conducted with lectures and presentations conducted collaboratively by students and lecturers. The pre-test was conducted to determine the participants' initial understanding, then a post-test was conducted to measure the increase in participants' understanding when compared to the pre-test results. Based on the results of the pre-test and post-test evaluations, it was found that only 49.8% of participants understood about OHS, and the results of understanding after the workshop increased to an average of 88.5% of participants understood about OHS, so based on the results of the evaluation, it can be concluded that the workshop conducted has been able and effective to improve the ability and understanding of participants from PT. Tukang Bangun Indonesia workers related to Occupational Safety and Health (K3)
27 January 2025 in Jurnal Teknik Sipil dan Arsitektur
Dinding penahan tanah merupakan struktur penting dalam konstruksi sipil yang digunakan untuk menahan tekanan tanah dan air. Dua metode umum yang digunakan untuk analisis dinding penahan tanah adalah metode Load and Resistance Factor Design (LRFD) dan Allowable Stress Design (ASD). LRFD didasarkan pada prinsip keseimbangan probabilistik dan mempertimbangkan faktor keamanan yang eksplisit untuk memastikan bahwa kapasitas struktur lebih besar dari beban yang mungkin terjadi, sedangkan ASD didasarkan pada prinsip bahwa tegangan yang bekerja pada struktur tidak boleh melebihi tegangan yang diizinkan untuk material dan lebih sederhana daripada metode LRFD, tetapi tidak mempertimbangkan faktor keamanan secara eksplisit dan tidak memperhitungkan ketidakpastian dalam material, beban, dan analisis. Dengan adanya perbedaan pendekatan dalam analisis LRFD dan ASD, penelitian ini bertujuan untuk membandingkan hasil analisis dengan pendekatan LRFD dan ASD pada kasus dinding penahan tanah tipe secant pile pada lereng sungai X yang dimana analisis awal menggunakan pendekatan ASD. Data sekunder berupa data tanah dan potongan melintang lereng sungai didapatkan dari konsultan perencanaan sebelumnya, lalu analisis dilakukan dengan software GEO5. Model awal dibuat terlebih dahulu dengan parameter yang sama dengan perencanaan sebelumnya agar memberikan hasil kebutuhan penetrasi, displacement dan gaya dalam yang sama dengan perencanaan dari konsultan perencana. Model yang telah sama dalam hasil analisis tersebut akan digunakan sebagai model analisis untuk pendekatan LRFD dan hasil analisis pada model LRFD tersebut akan dibandingkan dengan model analisis pada pendekatan ASD. Berdasarkan dari hasil analisis LRFD pada kondisi batas Kuat, didapatkan metode LRFD memberikan kedalaman penetrasi 21.7% lebih besar daripada ASD, gaya moment 40% lebih besar dari ASD dan gaya geser 7.8% lebih besar dari ASD. Pendekatan lebih detail perlu dilakukan pada kondisi batas lain seperti Layan dan Ekstrim agar dapat memberikan hasil perbandingan yang lebih optimal
This systematic literature review evaluates the potential of eggshell powder (ESP) as a sustainable soil stabilization material, synthesizing evidence from 22 peer-reviewed studies published between 2015 and 2025. This review tries to comprehensively assess its effects across multiple geotechnical properties and multiple soil types, covering standalone, blended, and bio-stabilization systems. The screening was done from a major database, extracting data on soil type, additive content, and mechanical performance. Findings reveal that ESP consistently enhances unconfined compressive strength (UCS) by 70 - 200%, increases California Bearing Ratio (CBR) by 100 - 200%, and reduces plasticity index (PI) sufficiently to improve soil classification from high to low plasticity categories. Optimal ESP contents range from 4–10% for standalone application to 3–15% in blended systems, with 10% recommended for bio-stabilization. Improvements are driven by pozzolanic reaction, cation exchange, flocculation, void filling, and calcite precipitation. ESP offers significant environmental benefits through waste valorization and reduced carbon footprint compared to cement and lime. However, challenges remain in scaling laboratory successes to field application and assessing long-term durability. This review supports the integration of ESP into sustainable geotechnical practice while highlighting the need for further applied research.