The propeller thrust force is a critical performance factor for UAVs, directly influencing the aircraft’s lift in the air. Various factors, such as propeller design, motor power, and operating conditions, influence thrust force. The propeller type also significantly impacts the thrust produced. It is essential to compare various types of propellers for UAV applications to obtain optimal thrust. This study employs ground testing and theoretical calculations to analyze and enhance propeller performance. Ground testing provides direct measurements of thrust force in controlled conditions, while theoretical study was conducted to predict thrust through mathematical calculations. This research was conducted on two different propellers, investigating variations in engine speed (Rpm). The results demonstrate that propellers A and B produce different amounts of thrust. These results were analyzed by comparing them with the outcomes of theoretical calculations. The experimental results and theoretical calculations show similar trends. However, there are noticeable differences in the thrust produced by both.
This study aims to mitigate the impact of electromagnetic interference on the performance of electronic systems in Unmanned Aerial Vehicles (UAVs) by employing various shielding materials. The materials tested include carbon fiber, E-glass, E-glass with an aluminium foil, and E-glass with a copper foil. A Vector Network Analyzer (VNA) and scattering parameter (S-Parameter) analysis, including reflection, absorption, and multiple reflection, were used to evaluate the shielding effectiveness of these materials within the frequency range of 4 - 5 GHz. The results showed that E-glass coated with copper had good overall shielding performance for SER, SEA, and SET values. This material reached a SET value of 96 dB at a frequency of 4.6 GHz, followed by E-glass coated with aluminium. In addition, adding carbon layers increased the shielding effectiveness, while E-glass without coating had the lowest shielding performance compared to the other materials. These findings indicate that E-glass coated with metal provides superior shielding effectiveness compared to carbon fiber, even when used in greater thickness.