Mateusz Kucharski

Mr. Mateusz Kucharski

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2025 in Energies
Verified
Journal Article
Open access
PDF file
AKArtur Kierzkowski
Artur Kierzkowski
Bartłomiej DziewońskiBartłomiej Dziewoński
Bartłomiej Dziewoński
KKKrzysztof Kaliszuk
Krzysztof Kaliszuk
MKMateusz Kucharski
Mateusz Kucharski
This study evaluates the energy consumption of a light electric flying-wing unmanned aerial system (UAS) during low-altitude holding maneuvers. Two flight patterns were investigated: circular holding at a specified altitude and a figure-eight trajectory. Test flights were conducted under varying meteorological and wind conditions, including scenarios where wind aligned and crossed the flight path. Key flight parameters such as pitch, yaw, heading deviation, flight altitude, ground speed, and airspeed were monitored. Concurrently, current and battery voltage were measured to compute the instantaneous power consumption of the propulsion system. This approach allowed for the determination and comparison of energy consumption across the two holding patterns. The outcomes contribute to a better understanding of power efficiency during prolonged flight maneuvers, supporting advancements in autonomous low-altitude UAS operations.

8 March 2025 in Energies
Verified
Journal Article
Open access
PDF file
MKMateusz Kucharski
Mateusz Kucharski
Maciej MilewskiMaciej Milewski
Maciej Milewski
Bartłomiej DziewońskiBartłomiej Dziewoński
Bartłomiej Dziewoński
KKKrzysztof Kaliszuk
Krzysztof Kaliszuk
TKTomasz Kisiel
Tomasz Kisiel
AKArtur Kierzkowski
Artur Kierzkowski
This paper presents an analysis of the flight endurance of solar-powered unmanned aerial vehicles (UAVs). Flight endurance is usually only analyzed under the operating conditions for the location where the UAV was constructed. The fact that these conditions change in a different environment of its operation has been missed. This can be disastrous for those looking to operate such a system under different geographical conditions. This work provides critical insights into the design and operation of solar-powered UAVs for various latitudes, highlighting strategies to maximize their performance and energy efficiency. This work analyzes the endurance of small UAVs designed for practical applications such as shoreline monitoring, agricultural pest detection, and search and rescue operations. The study uses TRNSYS 18 software to employ solar radiation in the power system performance at different latitudes. The results show that flight endurance is highly dependent on solar irradiance. This study confirms that the differences between low latitudes in summer and high latitudes in winter are significant, and this parameter cannot be ignored in terms of planning the use of such vehicles. The findings emphasize the importance of optimizing the balance between UAV mass, solar energy harvesting, and endurance. While the addition of battery mass can enhance endurance, the structural reinforcements required for increased weight may impose practical limitations. The scientific contribution of this work may be useful for both future designers and stakeholders in the operation of such unmanned systems.

19 June 2025 in Eksploatacja i Niezawodność – Maintenance and Reliability
Verified
Journal Article
Closed access
Maciej MilewskiMaciej Milewski
Maciej Milewski
AKArtur Kierzkowski
Artur Kierzkowski
MKMateusz Kucharski
Mateusz Kucharski
PZPaweł Zielonka
Paweł Zielonka
This work introduces a method for the inverse identification of composite material properties using dynamic response data and finite element modelling. The methodology combines numerical modal analysis, Design of Experiments (DoE), Response Surface Methodology, and a Multi-Objective Genetic Algorithm (MOGA) to determine material parameters without destructive testing. The approach was applied to a UAV composite wing, achieving high correlation between simulated and experimental modal characteristics, with natural frequencies deviations below 2%. Variations between the identified parameters and reference data are linked to inherent inconsistencies in composite manufacturing and the operational condition of the tested structure. Nevertheless, the proposed method proves to be a reliable and non-invasive tool for estimating mechanical properties, enhancing the predictive capabilities of numerical models. Its adaptability makes it a promising solution for future applications in structural health monitoring, damage assessment, and optimization of aerospace composite structures.

1 May 2026
Verified
Book Chapter
Closed access
MKMateusz Kucharski
Mateusz Kucharski
Maciej MilewskiMaciej Milewski
Maciej Milewski

3 October 2026 in Computation
Verified
Journal Article
Open access
PDF file
MKMateusz Kucharski
Mateusz Kucharski
Maciej MilewskiMaciej Milewski
Maciej Milewski
JNJacek Napora
Jacek Napora
Bartłomiej DziewońskiBartłomiej Dziewoński
Bartłomiej Dziewoński
KKKrzysztof Kaliszuk
Krzysztof Kaliszuk
TKTomasz Kisiel
Tomasz Kisiel
Accurate static-thrust prediction is essential for early-stage unmanned aerial vehicle (UAV) propulsion assessment, but computational fluid dynamics (CFD) predictions for small propellers can be sensitive to mesh resolution, domain size, boundary treatment, and turbulence closure. This study verifies and validates a steady Reynolds-averaged Navier–Stokes/single-reference-frame (RANS/SRF) workflow for a reconstructed APC 18 × 12E propeller. Experimental thrust was measured at seven operating points from 1000 to 7000 RPM, and four representative points were used for CFD validation. The model used geometry reconstructed by X-ray computed tomography (XCT), an aligned rotation axis, a verified polyhedral mesh, a 4 m cylindrical domain, and open boundaries representing ambient entrainment and downstream wake discharge. Mesh, domain-size, and boundary-condition sensitivities were assessed before comparing the Spalart–Allmaras, SST k-ω, realizable k-ε, and Reynolds stress closures. Mesh refinement changed thrust by 1.20% relative to the production mesh, whereas an all-pressure-outlet setup changed thrust by 5.7%. Under the investigated conditions, the Reynolds stress model yielded the lowest mean absolute percentage error (2.70%). Nevertheless, every model underpredicted thrust at 5000 and 7000 RPM, showing that the remaining high-speed discrepancy cannot be attributed to turbulence closure alone. The workflow therefore supports practical static propeller assessment, subject to the stated limitations of steady modelling and single-propeller validation.

1 July 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Maciej MilewskiMaciej Milewski
Maciej Milewski
JWJakub Wróbel
Jakub Wróbel
MKMateusz Kucharski
Mateusz Kucharski
KKKrzysztof Kaliszuk
Krzysztof Kaliszuk
Bartłomiej DziewońskiBartłomiej Dziewoński
Bartłomiej Dziewoński
AKArtur Kierzkowski
Artur Kierzkowski
Ground vibration testing (GVT) plays a key role in the validation of numerical models and the assessment of aeroelastic stability in lightweight aircraft structures. This study presents an experimental and numerical investigation of a full-scale composite flying wing unmanned aerial vehicle (UAV) intended for vertical take-off and landing operations. Due to its low structural mass and highly integrated configuration, the aircraft exhibits increased sensitivity to modeling assumptions, boundary conditions, and measurement uncertainties. A finite element model was developed in Ansys, incorporating detailed laminate definitions and the internal sandwich structure. Experimental modal testing was performed under free-free boundary conditions using an electrodynamic shaker and a distributed measurement consisting of 94 response locations. Frequency Response Functions (FRFs), coherence analysis, and the Complex Mode Indication Function (CMIF) were employed to identify the dominant structural modes. Particular attention was given to the bending and torsional modes that govern aeroelastic behavior. Comparison of experimental and numerical results showed good agreement in mode shapes, while discrepancies in natural frequencies ranged from 10.4% to 20.1%. The results demonstrate that the model adequately captures the dynamic behavior of the aircraft and provides a reliable basis for future aeroelastic and flutter analyses of lightweight composite flying wing.