This study evaluates the energy consumption of a light electric flying-wing unmanned aerial system (UAS) during low-altitude holding maneuvers. Two flight patterns were investigated: circular holding at a specified altitude and a figure-eight trajectory. Test flights were conducted under varying meteorological and wind conditions, including scenarios where wind aligned and crossed the flight path. Key flight parameters such as pitch, yaw, heading deviation, flight altitude, ground speed, and airspeed were monitored. Concurrently, current and battery voltage were measured to compute the instantaneous power consumption of the propulsion system. This approach allowed for the determination and comparison of energy consumption across the two holding patterns. The outcomes contribute to a better understanding of power efficiency during prolonged flight maneuvers, supporting advancements in autonomous low-altitude UAS operations.
This paper presents an analysis of the flight endurance of solar-powered unmanned aerial vehicles (UAVs). Flight endurance is usually only analyzed under the operating conditions for the location where the UAV was constructed. The fact that these conditions change in a different environment of its operation has been missed. This can be disastrous for those looking to operate such a system under different geographical conditions. This work provides critical insights into the design and operation of solar-powered UAVs for various latitudes, highlighting strategies to maximize their performance and energy efficiency. This work analyzes the endurance of small UAVs designed for practical applications such as shoreline monitoring, agricultural pest detection, and search and rescue operations. The study uses TRNSYS 18 software to employ solar radiation in the power system performance at different latitudes. The results show that flight endurance is highly dependent on solar irradiance. This study confirms that the differences between low latitudes in summer and high latitudes in winter are significant, and this parameter cannot be ignored in terms of planning the use of such vehicles. The findings emphasize the importance of optimizing the balance between UAV mass, solar energy harvesting, and endurance. While the addition of battery mass can enhance endurance, the structural reinforcements required for increased weight may impose practical limitations. The scientific contribution of this work may be useful for both future designers and stakeholders in the operation of such unmanned systems.
This paper presents the concept of optical navigation used in unmanned aerial systems based on fiducial markers. In this work, an idea of ArUco and AprilTag markers is presented. The paper provides an overview of existing solutions and comparison between other alternative navigation methods. The ideas presented in this article have been tested on real unmanned platforms based on ArduPilot software. The paper describes and compares landing touchdown precision while using regular GPS and optical navigation approach. Previously presented markers have been used as desired touchdown positioning.
This study presents a cooperative unmanned aerial system (UAS) designed to enable precise autonomous landings in unstructured environments using low-cost onboard vision technology. This approach involves a carrier UAV with a stabilized RGB camera and a neural inference system, as well as a lightweight tailsitter payload UAV with an embedded grayscale vision module. The system relies on visually recognizable landing markers and does not require additional sensors. Field trials comprising full deployments achieved an 80% success rate in autonomous landings, with vertical touchdown occurring within a 1.5 m radius of the target. These results confirm that vision-based marker detection using compact neural models can effectively support autonomous UAV operations in constrained conditions. This architecture offers a scalable alternative to the high complexity of SLAM or terrain-mapping systems.
This paper presents an experimental investigation of the level flight speed and endurance characteristics of a micro-class unmanned aerial vehicle as a function of operating weight. Wind tunnel experiments were conducted to determine the aerodynamic performance and power requirements of the UAV over a range of operating weight configurations. The tested vehicle, a fixed-wing micro UAV, was examined under steady, level flight conditions, with particular emphasis on identifying variations in the minimum power required to sustain level flight. Measured aerodynamic forces and moments were used to derive drag polars and the corresponding power curves for each mass configuration. Based on these results, endurance estimates were obtained by coupling the experimentally derived power requirements with the characteristics of the onboard electric propulsion system. The study demonstrates a clear shift in flight speeds with increasing operating weight, as well as a reduction in achievable endurance, highlighting the sensitivity of micro-class UAV performance to mass variations, and therefore energy consumption.