This paper presents a high-efficiency polarization-insensitive 3 × 3 beam splitter utilizing a two-dimensional square-pillar dielectric grating structure. Operating at a wavelength of 118.83 μm under normal incidence, the device achieves uniform diffraction of incident light into nine distinct orders ((0,0), (±1,0), (0,±1), and (±1,±1)). The polarization insensitivity is realized through the inherent symmetry of the square-pillar geometry, which eliminates polarization-dependent phase modulation. The rigorous coupled-wave analysis (RCWA) and the simulated annealing (SA) algorithm were employed to optimize the grating parameters. Numerical results indicate that the efficiency of each diffraction order exceeds 10.002%, with an average efficiency of 10.972% and an average polarization-dependent loss (PDL) of 0.130 dB. As a fundamental optical component, the 3 × 3 beam splitter holds potential application value in terahertz imaging, multi-beam interferometry, and structured light projection.
In recent years, the value of research in the field of nonreciprocal energy radiation has been increasing. However, at present, the study of nonreciprocal structures with polarization independence and small-angle incidence is still to be further researched, which is what this paper focuses on. In this paper, a device consisting of a two-dimensional grating, a magneto-optical material layer, and a metal plate is proposed, which can realize polarization-independent nonreciprocity. Two pairs of complementary nonreciprocal peaks can be obtained for TE and TM polarizations in the wavelength range of 10.3–10.8 μm, with nonreciprocal efficiencies exceeding 89% and up to 92%. Moreover, at the wavelengths of 10.696 and 10.760 μm, the polarization-independent nonreciprocal phenomenon can be formed; meanwhile, the efficiency exceeds 87.5% and reaches up to 92%. At polarization-independent nonreciprocal peaks where resonance occurs, through careful analysis of the distribution of electromagnetic fields and the use of coupled mode theory, we have discovered the physical mechanisms that form nonreciprocal phenomena and verified the data. The results in this paper provide more practical ideas for the research and development of nonreciprocal energy radiation devices.
A dual polarization perfect absorber based on hexagonal boron nitride (hBN) crystals within the mid-infrared (M-IR) spectral regime has been displayed numerically. The newly developed absorber comprises hBN film applied on a substrate, with a spacer layer between the film and a series of dielectric square arrays. The absorber has nearly 100% polarization-insensitive absorption at 6.9515 μm for light under normal incidence, related to the guided mode resonance effect. Such perfect absorption is interpreted physically by examining electromagnetic field profiles. Furthermore, the impact of structural parameters on the absorption profiles was systematically analyzed to offer practical insight into fabrications. This research lays the foundation for developing a novel hBN-based absorber utilizing guided-mode resonance, which will benefit the potential application within the M-IR region.