This paper presents a hybrid two-dimensional (2D) microstructure, consisting of an Ag layer and a GaAs dielectric sandwich, which enhances sensing capabilities by exciting surface plasmon resonance in the metal layer, distinguishing it from conventional guided mode resonance structures. The absorption peak reaches a maximum of 99.8% with a full width at half maximum of 0.18 THz. We analyze the electric field distribution at the absorption peak and discuss the resonance mechanism based on coupled-mode theory and impedance matching. Additionally, the shifts in absorption peaks are investigated as the refractive index of the analyte varies from 1.0 to 1.3, showing a sensitivity of 4.8 THz/RIU. The proposed 2D grating structure demonstrates great potential for applications in biomedical diagnostics, food safety, and environmental monitoring.
This paper presents a high-efficiency polarization-insensitive 3 × 3 beam splitter utilizing a two-dimensional square-pillar dielectric grating structure. Operating at a wavelength of 118.83 μm under normal incidence, the device achieves uniform diffraction of incident light into nine distinct orders ((0,0), (±1,0), (0,±1), and (±1,±1)). The polarization insensitivity is realized through the inherent symmetry of the square-pillar geometry, which eliminates polarization-dependent phase modulation. The rigorous coupled-wave analysis (RCWA) and the simulated annealing (SA) algorithm were employed to optimize the grating parameters. Numerical results indicate that the efficiency of each diffraction order exceeds 10.002%, with an average efficiency of 10.972% and an average polarization-dependent loss (PDL) of 0.130 dB. As a fundamental optical component, the 3 × 3 beam splitter holds potential application value in terahertz imaging, multi-beam interferometry, and structured light projection.
This paper presents a two-dimensional grating splitter based on a trapezoidal array. Under vertical incidence of light in the terahertz band at 2.52 THz, it is possible to suppress the (0,0) order, which has an efficiency of 0.5%, while simultaneously achieving high-efficiency outputs for the (0,±1) and (±1,0) orders, with efficiencies of 25.1% and 24.7%, respectively. And it has good uniformity and extinction rate, where the uniformity (EU) is 99.1% and the extinction rate (ET) is 0.07 dB. The research process uses the finite element method (FEM) to optimize the grating parameters, and the corresponding grating parameters are the optimal solution when the target diffraction order efficiency is optimal. In order to verify the feasibility of practical applications of gratings, the bandwidth ranges of the grating parameters are discussed, and the results show that the grating parameters all possess a sizable bandwidth range. Therefore, this work has a promising application in the fields of 3D imaging and reconstruction, microscopy technology, and it also provides a new and efficient scheme for modeling 2 × 2 splitters.