In this paper, a review of the achieved accuracy in the literature for ray tracing (RT) based channel modeling is presented with a focus on outdoor propagation scenarios in the sub-6 GHz frequency range. The achieved accuracy is analyzed from three perspectives: 1) The input parameters which include the environmental description in the form of digital maps and the corresponding constitutive material parameters; 2) from the interaction mechanisms perspective and 3) from the output perspective where the achieved accuracy of predicted path loss is reviewed. Uniform assignment of materials to the entire propagation scenario is observed in most of the works in the literature which is attributed to the composite nature of common building materials and the difficulty of characterizing all material properties especially for outdoor scenarios. The digital maps are shown to introduce a certain degree of uncertainty in the RT predictions as most common sources of the maps hardly publish the accuracy. Notwithstanding, the prediction of path loss in most RT tools is observed to be rather robust against the inaccuracies in the input parameters with most RT tools achieving a prediction accuracy with a mean error below 4 dB and a standard deviation (STD) below 8 dB.
Virtual antenna arrays are versatile and cost-effective tools for millimeter-wave channel characterization. Massive sampling of the channel in space with virtual antenna arrays enables high spatial resolution in channel sounding. In this paper, a uniform cubic array is used with a vector network analyzer to characterize an indoor propagation channel. The power angle delay profile under line-of-sight (LOS) and obstructed-LOS (OLOS) scenarios is then extracted from the measurement data. The analysis is extended to a multi-user scenario using a virtual uniform rectangular array, which acts as the base station and with users under LOS and OLOS conditions. Results show interference suppression with zero-forcing beamforming that performs well even in critical multi-user scenarios based on the measured channels, i.e., a scenario with closely spaced users in LOS conditions and a scenario with a strong interfering user and a weak desired user.
14 November 2019 in IEEE Transactions on Microwave Theory and Techniques
This paper presents the first vector network analyzer (VNA)-based sub-Terahertz (sub-THz) phase-compensated channel sounder at 220 330 GHz using radio-over-fiber (RoF) techniques that could enable long-range phase-coherent measurements. The optical cable solution enables long-range channel measurements at sub-THz bands, since it can effectively minimize the cable loss. This paper also proposes a novel phase compensation scheme to stabilize the phase variations introduced by optical fiber of the channel sounder to enable its application in multi-channel/antenna measurements. This proposed channel sounder is validated in back-to-back measurements under two optical cable conditions, i.e., with presence of thermal changes and mechanical stress. The phase variation introduced by the cable effects in the system is shown to be over 400_ in 220-330 GHz, compared to 15_ at 220-288 GHz and 37_ in 288-330 GHz after compensation, respectively, demonstrating the robustness and effectiveness of the developed channel sounder in practice. The developed system, which has a dynamic range of 106:7 dB, can support measurement range up to 300m (limited by the optical cable length in our system and subject to over-the-air signal transmission loss in practical environment).
8 August 2022 in IEEE Transactions on Microwave Theory and Techniques
This article presents a novel and cost-effective vector network analyzer (VNA)-based phase-compensated channel sounder operating in the frequency range of 10–50 GHz using radio-over-fiber (RoF) techniques, which can support multilink/channel long-range phase-coherent measurements. The optical cable enables long-range channel measurements with a dynamic range of 115.7 dB at 30 GHz (for the back-to-back connection). The phase compensation scheme is utilized for stabilizing the inherent phase variations introduced by the optical fiber of the channel sounder to enable its application in multichannel/antenna measurements. A novel optical delay line and combiner scheme is proposed and implemented to separate the signals, thereby saving the port resource on the VNA for multilink/channel measurements. The proposed channel sounder is validated in back-to-back measurements under two optical cable conditions, i.e., with the presence of thermal changes and mechanical stress. The phase change could be maintained within 3° at 10–30 GHz and 7° in 30–50 GHz compared to the over 80° phase variation introduced by the cable effects at 10–50 GHz, demonstrating the robustness and effectiveness of the developed channel sounder in practice. With the proposed optical delay line and combiner scheme, multiple channels can be measured simultaneously with minimal VNA ports, significantly reducing the measurement cost and time for multilink channel measurements. Two multilink indoor channel measurements are conducted and analyzed using a virtual uniform rectangular array (URA) at 28-GHz bands. The results demonstrate the capability of the proposed channel sounder to perform high-fidelity long-range ultrawideband multilink channel measurements.
8 September 2022 in IEEE Transactions on Aerospace and Electronic Systems
Performance testing under realistic propagation channel conditions is essential for virtual drive testing (VDT), where radio channel emulators are typically employed in the laboratory for such applications. Optimal allocation of tap resources in the channel emulator is critical in hardware-in-the-loop emulation of radio channels due to the constraint of real-time operation requirements, hardware complexity and cost. As a result, replaying arbitrary site-specific e.g. measured or ray tracing (RT) simulated radio channels in channel emulators requires delay alignment and reduction in the number of multipath components (MPCs) in the channel to match the available hardware resources. However, such operations would essentially introduce inaccuracies in the emulated channel. In this paper, a framework for pre-processing site-specific radio channels for hardware emulation is proposed. The delay alignment problem is formulated as a finite impulse response (FIR) filter design problem whereas the subsequent tap reduction and selection process is formulated as a sparse approximation problem. This approach enables maximization of the accuracy of the reproduced channel frequency response (CFR) and Doppler profile in the hardware emulator using a limited number of taps. The efficiency of the proposed framework is demonstrated experimentally with a dynamic vehicular RT simulated channel which is replayed on a state-of-the-art radio channel emulator.