This paper presents the first vector network analyzer (VNA)-based sub-Terahertz (sub-THz) phase-compensated channel sounder at 220 330 GHz using radio-over-fiber (RoF) techniques that could enable long-range phase-coherent measurements. The optical cable solution enables long-range channel measurements at sub-THz bands, since it can effectively minimize the cable loss. This paper also proposes a novel phase compensation scheme to stabilize the phase variations introduced by optical fiber of the channel sounder to enable its application in multi-channel/antenna measurements. This proposed channel sounder is validated in back-to-back measurements under two optical cable conditions, i.e., with presence of thermal changes and mechanical stress. The phase variation introduced by the cable effects in the system is shown to be over 400_ in 220-330 GHz, compared to 15_ at 220-288 GHz and 37_ in 288-330 GHz after compensation, respectively, demonstrating the robustness and effectiveness of the developed channel sounder in practice. The developed system, which has a dynamic range of 106:7 dB, can support measurement range up to 300m (limited by the optical cable length in our system and subject to over-the-air signal transmission loss in practical environment).
2 August 2023 in IEEE Journal of Selected Topics in Signal Processing
Sub-Terahertz (sub-THz) (i.e., 100-300 GHz) communication is envisioned as one of the key components for future beyond fifth-generation (B5G) communication systems due to its large untapped bandwidth. Sub-THz channel measurements are essential for building accurate and realistic sub-THz channel models. Virtual antenna array (VAA) scheme has been widely employed for radio channel sounding purposes in the literature. However, its application for the W-band (i.e., 75-110 GHz) has been rarely discussed due to system phase instability issues. To tackle this problem, a long-range phase-compensated vector network analyzer (VNA)-based channel sounder at the W-band is proposed. First, the back-to-back measurement of the developed channel sounder is carried out with the presence of cable bending, where the initial phase variation beyond $180^{\circ }$ range due to cable effects can be well corrected to within $10^{\circ }$ range with the proposed phase-compensation scheme, clearly validating its effectiveness. To examine how well it works in practical deployment scenarios, the proposed channel sounder is then employed for channel sounding with two measurement distances, covering both near-field (with a line-of-sight (LoS) distance of 7.3 m) and long-range (with a LoS distance of 84.5 m) cases. Based on the measured data, a high-resolution channel parameter estimator is applied to extract the channel multipath parameters for the large-scale VAA at the W-band, both in the near-field and long-range scenarios, respectively. The high-resolution algorithm was extended to support virtual arrays composed of both omnidirectional antenna and directive antenna in this work. The conventional directional scanning scheme (DSS) measurement is adopted as the reference measurement to validate the effectiveness and robustness of the developed channel sounder. In the end, to demonstrate the state-of-art channel sounding capabilities of the developed channel sounder, ultra-wideband (UWB) channel measurements at 104.5 GHz with 11 GHz bandwidth using the VAA scheme are conducted in a hall scenario with the measurement range up to 58 m with omnidirectional antennas, and the channel parameters are extracted using the validated high-resolution channel parameter estimator for channel modeling purposes.
The sixth-generation (6G) communication system will leverage the evolving multiple-input-multiple-output (MIMO) technology, referred to as gigantic MIMO. It is envisioned to accommodate arrays with over one thousand antennas for low and mid frequency bands, and with up to thousands of antennas for high frequency bands such as THz. With such a substantial number of antenna elements, the gigantic MIMO technology has the potential to unlock new use cases and applications with extreme requirements. Radio channel characterization plays a crucial role in the design, optimization, and performance evaluation of these radio systems, making it highly desirable for advancing the deployment of the gigantic MIMO technology. This article discusses key challenges and potential solutions for radio channel characterization of gigantic MIMO systems, including channel modeling approaches, experimental platform development i.e., channel sounder design, and radio channel parameter estimation. Further, a channel measurement campaign based on a virtual antenna array (containing 2400 antenna elements) and a corresponding ray tracing simulation are performed for a practical indoor scenario as examples to characterize a realistic gigantic MIMO channel.
12 July 2024 in IEEE Transactions on Antennas and Propagation
Sub-Terahertz (sub-THz), which encompasses a frequency range between 100-300 GHz, is anticipated to be an important element in the development of future sixth-generation (6G) communication systems due to its vast untapped bandwidth resource. Developing the realistic sub-THz channel model is essential for designing and deploying future 6G communication systems. We presented the channel measurements and characterization of a recent sub-THz channel measurement campaign conducted in an indoor hall scenario at sub-THz bands in this work. The channel measurement campaign was conducted with 55 transmitter (Tx)-receiver (Rx) deployment locations (including two pre-defined ‘L’-shape routes) covering the Tx-Rx distance range of [3, 58]m at 99-101 GHz using a phase-compensated long-range channel sounder. A channel parameter estimation algorithm is exploited to extract the multipath component (MPC) parameters. The composite channel parameters, i.e., path loss, delay spread, angular spread, and K -factor, are calculated and analyzed using the extracted MPC parameters. It is seen that the spreads of delay and angular and the K -factor statistically obey log-normal distributions and the normal distribution, respectively, and the fitting parameters are concluded for statistical modeling. An MPC trajectory tracking algorithm was also utilized to trace the MPC trajectories in the two routes. The MPC-level channel parameters were then investigated based on the trajectory results. The proposed 100 GHz channel model for the indoor scenario was also compared with the existing channel models. This work provides an accurate and comprehensive indoor channel characterization, filling the gap in statistical channel models for this frequency band.
13 May 2025 in IEEE Transactions on Wireless Communications
Terahertz (THz) integrated sensing and communication (ISAC) aims to integrate novel functionalities, e.g., environmental sensing, into communication systems. Accurate channel modeling is crucial for the design and performance evaluation of future ISAC systems. This paper presents a novel hybrid channel model and a high-precision environment reconstruction framework for THz monostatic sensing. Vector network analyzer (VNA)-based channel measurements using the directional scanning sounding (DSS) scheme are performed in a laboratory environment at 300 GHz with a 20 GHz bandwidth. A low-complexity space-alternating generalized expectation-maximization (SAGE)-based algorithm is proposed to estimate the parameters of the multipath propagation components (MPCs) and to de-embed the antenna pattern. Leveraging geometric principles, the MPCs are classified into specular and diffuse components. In our proposed framework, the specular components are used for material detection and identification, while the diffuse components are leveraged to enhance geometric environment reconstruction. Demonstrations of both geometrical environment reconstruction and material identification are provided to validate the effectiveness of the proposed approach. This work offers valuable insights into THz monostatic sensing channel modeling and the design of future THz ISAC systems.
6G communication will greatly benefit from using extremely large-scale antenna arrays (ELAAs) and new midband spectrums (7–24 GHz). These techniques require a thorough exploration of the challenges and potentials of the associated near-field (NF) phenomena. It is crucial to develop accurate NF channel models that include spherical-wave propagation and spatial nonstationarity (SnS). However, channel measurement campaigns for midband ELAA systems have rarely been reported in the state of the art. To this end, this work develops a channel sounder dedicated to midband ELAA systems based on a distributed modular vector network analyzer (VNA) incorporating radio over fiber (RoF), phase compensation, and virtual antenna array (VAA) schemes. This novel channel-sounding testbed based on off-the-shelf VNA has the potential to enable large-scale experimentation due to its generic and easily accessible nature. The main challenges and solutions for developing NF channel models for midband ELAA systems are discussed, including channel sounders, multipath parameter estimation algorithms, and channel modeling frameworks. Besides, the study reports a measurement campaign in an indoor scenario using a 720-element virtual uniform circular array (UCA) ELAA operating at 16–20 GHz, highlighting the presence of spherical wavefronts and spatial nonstationary effects. The effectiveness of the proposed NF channel parameter estimator and channel modeling framework is also demonstrated using the measurement data.