To address the thermal protection challenges of multiple high-temperature components and the electrical power deficiency in hypersonic vehicles, this study proposes twelve multi-heat-source thermoelectric conversion schemes based on the sCO2 Brayton cycle. A three-dimensional evaluation system for thermal management is established, incorporating thermal efficiency, coolant mass flow rate, and system mass as key metrics. A comprehensive parameter sensitivity analysis was conducted on the twelve dual-heat-source cycle configurations. For systematic performance comparison, the Non-dominated Sorting Genetic Algorithm II (NSGA-II) was employed for multi-objective optimization, with Pareto fronts analyzed to determine optimal configurations. The results demonstrate that appropriately increasing the minimum cycle temperature can significantly reduce coolant flow requirements. Multi-objective optimization reveals the following: (1) The pre-compressed aero-comb configuration achieves optimal performance in the efficiency-mass flow rate optimization scenario; (2) Both pre-compressed aero-comb and re-compressed comb-aero configurations show superiority in the efficiency-mass optimization scenario; (3) The pre-compressed aero-comb configuration exhibits lower system mass in low coolant flow regions for the mass flow rate-mass optimization scenario. Overall, the performance of the precompression aero-comb configuration is relatively superior. This work provides an important reference for the design of thermal management systems for hypersonic vehicles.
27 August 2026 in Journal of the Global Power and Propulsion Society
For horizontal take-off and landing reusable hypersonic vehicles, thermal management of aerodynamic stagnation heat at high Mach numbers constitutes the most critical thermal challenge. Usually, the researcher addresses this through an integrated thermal allocation strategy employing lightweight high-efficiency precoolers, which systematically redistribute thermal loads by reducing inlet/outlet temperatures while enhancing energy input to power components, thereby achieving superior energy utilization efficiency. However, the ultra-fine characteristic dimensions (∼1 mm scale) of modern precoolers intensify fluid-thermal coupling effects, rendering conventional design methodologies inadequate with prediction deviations exceeding 30%. To resolve this, we present an inverse design framework based on a prototype sCO2 precooler. Through 15 meticulously designed operational cases encompassing air inlet temperatures around 800 K and CO2/air flow ratios of 1–1.5, we establish a data-informed methodology that synergizes: (1) Experimental characterization of thermal-hydraulic performance (including heat transfer coefficients and pressure drop correlations). (2) Reverse determination of critical design parameters through integration with conventional heat exchanger design protocols. (3) Validation under representative hypersonic flight conditions. Experimental verification demonstrates that the proposed methodology reduces temperature prediction errors to <15% compared to empirical data, while maintaining pressure drop deviations within ±10%. This advancement provides a validated design paradigm for next-generation hypersonic thermal management systems requiring strong multi-physics coupling resolution.