Surface application of photocatalyst in cement-based materials could endow it with photocatalytic properties, however, the weak adhesion between photocatalyst coatings and the substrates may result in poor durability in outdoor environments. In this study, TiO2@SiO2 core-shell nanocomposites with different coating thicknesses were synthesized by varying the experiment parameters. The results indicate that SiO2 coatings accelerated the rhodamine B removal to a certain extent, owing to its high surface area; however, more SiO2 coatings decreased its photocatalytic efficiencies. The cement matrix treated with TiO2@SiO2 core-shell nanocomposites showed good photocatalytic efficiency and durability after harsh weathering processing. A reaction mechanism was revealed by the reaction of TiO2@SiO2 nanocomposites with Ca(OH)2.
Cement-based composite is one of the essential building materials that has been widely used in infrastructure and facilities. During the service of cement-based materials, the performance of cement-based materials will be affected after the cement surface is exposed to pollutants. Not only can the surface of cement treated with a photocatalyst degrade pollutants, but it can also protect the cement-based materials from being destroyed. In this study, graphite carbon nitride-silica composite materials were synthesized by thermal polymerization using nanosilica and urea as raw materials. The effect of nanosilica content and specific surface area were investigated with the optimal condition attained to be 0.15 g and 300 m2/g, respectively. An X-ray diffractometer, thermogravimetric analyzer, scanning electron microscope, a Brunauer–Emmett–Teller (BET) specific surface area analyzer and ultraviolet-visible spectrophotometer were utilized for the characterization of as-prepared graphite carbon nitride-silica composite materials. Subsequently, the surface of cement-based materials was treated with graphite carbon nitride-silica composite materials by the one-sided immersion and brushing methods for the study of photocatalytic performance. By comparing the degradation effect of Rhodamine B, it was found that the painting method is more suitable for the surface treatment of cement. In addition, through the reaction of calcium hydroxide and graphite carbon nitride-silica composite materials, it was found that the combination of graphite carbon nitride-silica composite materials and cement is through C-S-H gel.
The potential of photocatalysts modified cement-based materials in degrading environmental pollutants is evident in previous studies, but the application of photocatalytic cement-based materials still appears limited in actual practice due to the dispersion effect. This work seeks to prepare photocatalytic cement paste by mixing cement with BiOBr precursor solutions in terms of the improvement of dispersion efficiency, and additional hydrothermal conditions provided by autoclaved curing period are required to activate the photocatalytic activity of photocatalysts crystals. The presence of BiOBr precursor solutions results in an increase of RhB degradation rate of up to 45.4% and the NOx removal efficiency was up to 4.4%, and the formation of BiOBr photocatalysts crystals is the main reason for photocatalytic performance enhancement. The morphology of photocatalysts and the pore size distribution of cement paste also contribute to the photocatalytic activity enhancement by the exposed surface of photocatalysts, which are supported by the analyses of Scanning Electron Microscope and Mercury Intrusion Porosimetry results. A new mechanism is suggested to explain the synergistic role of crystals and microstructure on the enhancement of photocatalytic activity with the extension of autoclaved curing time. As supports for photocatalysts, the development changes of compressive strength of cement paste are also discussed.
The rapid growth of aluminum and graphite industries has generated substantial stockpiles of red mud and graphite tailings, which pose environmental risks due to their high heavy metal content and potential for soil and water contamination. This study investigated the leaching behavior of heavy metals from these materials post-stabilization using cement and a sulfonated oil-based ion curing agent, thereby evaluating their suitability for safe reuse. Semi-dynamic leaching experiments were employed to measure heavy metal release, supplemented by kinetic modeling to discern key leaching mechanisms. The findings indicated that the heavy metal concentrations in leachates were consistently below regulatory standards, with leaching dynamics influenced by dual mechanisms: the diffusion of ions and surface chemical reactions. A diffusion coefficient-based analysis further suggested low leachability indices for all metals, confirming effective immobilization. These results suggest that cement and curing agent-stabilized red mud–graphite tailing composites reduce environmental risks and possess characteristics favorable for resource recovery, thus supporting their sustainable use in industrial applications.