The control of thermal interfaces has gained importance in recent years because of the high cost of heating and cooling materials in many applications. Thus, the main focus in this work is to compare the second and third generations of the CRONE controller (French acronym of Commande Robuste d’Ordre Non Entier), which means a non-integer order robust controller, and to synthesize a robust controller that can fit several types of systems. For this study, the plant consists of a rectangular homogeneous bar of length L, where the heating element in applied on one boundary, and a temperature sensor is placed at distance x from that boundary (x is considered very small with respect to L). The type of material used is the third parameter, which may help in analyzing the robustness of the synthesized controller. The originality of this work resides in controlling a non-integer plant using a fractional order controller, as, so far, almost all of the systems where the CRONE controller has been implemented were of integer order. Three case studies were defined in order to show how and where each CRONE generation controller can be applied. These case studies were chosen in such a way as to influence the asymptotic behavior of the open-loop transfer function in the Black–Nichols diagram in order to point out the importance of respecting the conditions of the applications of the CRONE generations. Results show that the second generation performs well when the parametric uncertainties do not affect the phase of the plant, whereas the third generation is the most robust, even when both the phase and the gain variations are encountered. However, it also has some limitations, especially when the temperature to be controlled is far from the interface when the density of flux is applied.
This article presents the third part of a larger project whose final objective is to study and analyse the effects of viscous thermal losses in a flute wind musical instrument. After implementing the test bench in the first phase and modelling and validating the dynamic behaviour of the simulator, based on the previously implemented test bench (without considering the losses in the system) in the second phase, this third phase deals with the study of the viscous thermal losses that will be generated within the resonator of the flute. These losses are mainly due to the friction of the air inside the resonator with its boundaries and the changes of the temperature within this medium. They are mainly affected by the flute geometry and the materials used in the fabrication of this instrument. After modelling these losses in the frequency domain, they will be represented using a system approach where the fractional order part is separated from the system’s transfer function. Thus, this representation allows us to study, in a precise way, the influence of the fractional order behaviour on the overall system. Effectively, the fractional behavior only appears much below the 20 Hz audible frequencies, but it explains the influence of this order on the frequency response over the range [20–20,000] Hz. Some simulations will be proposed to show the effects of the fractional order on the system response.
The work presented in this paper is to be read within the context of a connected autonomous vehicle (CAV). This context makes it possible to consider dividing the overall operational domain (operational design domain: ODD) of the vehicle into three sub-domains, relating to the areas of comfort (ODD1), road-holding (ODD2), and emergency situations (ODD3). Thus, based on information from the CAV’s proprioceptive and exteroceptive sensors, in addition to information from the infrastructure and other vehicles, supervision makes it possible, at any time, to identify the ODD in which the vehicle is located and to propose the most appropriate strategy, particularly for suspension control. Work already carried out by the authors made it possible to determine a crone sky hook (CSH) strategy for suspension control, 100% comfort-oriented for ODD1, a mixed crone sky hook—crone ground hook (CSH-CGH) strategy, oriented towards road-holding for ODD2, and a CGH strategy oriented towards safety for ODD3. In this paper, a comparative study focusing on security (ODD3) is presented. It concerns two versions of the CGH strategy (nominal CGHN and generalized CGHG). More precisely, for the comparative study to be meaningful, the control loops of the two versions have the same speed (iso-speed constraint), and the performance indices are normalized with respect to the values obtained in fault mode when the actuator is faulty. Notably, the CGHG version is part of the dynamics of fractional systems.