This paper investigates the usefulness of combining dielectric and conductive materials with various geometries to build resonators and enhance patch antenna performance when considering the decoupled design approach. Three materials (distilled water, glycerin, and graphite) and fifteen geometries are considered. The obtained results through numerical simulations show how the selected materials and geometries can be combined to strategically design resonators that can effectively confine electromagnetic fields, shift the resonant frequency, improve antenna directionality and effective gain, facilitate multi-band operation, broaden the bandwidth, and improve impedance matching and the radiation pattern. Overall, the analyses and discussions offer insights and guidelines for combining dielectric and conductive materials with several geometries to build a resonator that can improve patch antenna performance when a low-quality substrate is considered.
This paper focuses on the design and experimental validation of a 2 × 2 patch antenna array for ground-to-ground wireless power transfer at 2.4 GHz. The antenna, implemented on a Rogers RO4725JXR substrate, was optimized in CST Microwave Studio Suite for impedance matching, gain, and radiation efficiency. Measurements show a minimum reflection coefficient of − 38.32 d B at 2.425 G H z and a − 10 d B bandwidth of 33 MHz, validating the agreement with simulations.
This work addresses the design of an integrated rectangular patch antenna with a stepped-impedance low-pass filter for RF energy harvesting at 2.45 GHz, implemented on an FR-4 substrate and simulated in CST Microwave Studio. After optimization, the integrated structure still operates at 2.45 GHz ( | S 11 | < − 10 dB ) with a realized gain of 3 dBi. The results indicate that integrating the stepped-impedance LPF into the feedline maintains radiating performance while providing a compact RF front-end with out-of-band attenuation for energyharvesting receivers.
This paper numerically investigates the effect of a rectangular prism dielectric resonator, filled with distilled water, deionized water, seawater, and glycerin, on a 2.45 GHz FR-4 rectangular patch antenna. Results show that distilled water and glycerin provide the best performance, seawater the worst due to high conductivity, and deionized water an intermediate behavior.