The concept of the sustainable development of the world economy is currently aimed at achieving carbon neutrality, and this is due to the global warming of the planet. Energy and construction make a significant contribution to the release of carbon emissions into the environment and atmosphere. According to statistics, simply burning one ton of Portland cement clinker provokes the release of at least half a ton of carbon dioxide. In this study, the prepared samples were subjected to electron diffraction studies, as well as the X-ray phase analysis of the zone (XRF) using an ARLX’TRA diffractometer. Studies of macro- and microstructures were carried out using a Quanta 3D 200i scanning microscope. The obtained spectra were processed using EDAX TEAM software. The study of the microstructure of the samples showed that the bulk of the heterogeneous systems consisted of volumetric aggregates and intergrowths, i.e., small accumulations on their surfaces with pronounced cleavage, features of the microstructure indicating mineral formation processes. Therefore, the development of low-carbon construction models will make it possible to make a contribution and open an effective path to the implementation of climate policy through the rational use of natural resources and the involvement of industrial waste and nature-like technologies in the production process. In this regard, one of the options for solving the identified problems is to revise existing technologies and develop low-carbon, low-clinker binders using industrial waste and substandard raw materials.
This paper presents the development of composite silicate mass compositions based on man-made waste for the production of autoclave hardening products, as well as the results of physico-chemical studies of hydration products of silicate materials. The possibility, expediency and efficiency of using multi-tonnage technogenic waste of Kazakhstan in the industry of composite building materials is shown. Based on the results of the conducted research, the composition of a composite silicate mass based on burnt carbonate-barium tailings (8–12%), electrothermophosphoric slags (82–90%) or sand and dust from cement kiln electrofilters (2–5%) for the production of autoclave hardening products was developed. It was found that the cementing substance in composite silicate materials is represented by CSH(B) calcium silicate hydrates, tobermorite and serpentine. The simultaneous presence of fibrous and crystalline calcium and magnesium silicate hydrates in hydration products leads to the creation of composite products with a maximum strength of 41–49 MPa.