A key task for customs workers is the interception of hazardous, illegal and counterfeit items in order to protect the health and safety of citizens. However, it is estimated that only a small fraction of cargo is inspected and an even smaller fraction of trafficked goods are detected. Today, the most widely used technology for scanning vehicles, ranging from vans and trucks to railcars, is ray and X-ray radiography. New technologies are required to overcome current technological shortcomings, such as the inability to detect the target material composition, the usage of harmful ionising radiation sources and the resultant low throughput. Cosmic ray tomography (CRT) is a promising technology for cargo screening. Cosmic ray muons have average energies of around 10,000 times larger than a typical X-ray and therefore can penetrate relatively large and dense materials. By analysing muon scattering, it is possible to identify materials hidden inside shielding that is too thick or deep for other imaging methods. CRT is also completely passive, exploiting naturally occurring secondary cosmic radiation, and is therefore safe for humans and animals. Contrary to conventional X-ray- or -ray-based imaging techniques, CRT also allows material differentiation and anomaly localisation within the cargo or vehicle through the provision of 3D images. This article reviews the current state-of-the-art technology in CRT, critically assessing the strengths and weaknesses of the method, and suggesting further directions for development.
3 July 2024 in Machine Learning: Science and Technology
We describe a software package, TomOpt, developed to optimise the geometrical layout and specifications of detectors designed for tomography by scattering of cosmic-ray muons. The software exploits differentiable programming for the modeling of muon interactions with detectors and scanned volumes, the inference of volume properties, and the optimisation cycle performing the loss minimisation. In doing so, we provide the first demonstration of end-to-end-differentiable and inference-aware optimisation of particle physics instruments. We study the performance of the software on a relevant benchmark scenario and discuss its potential applications. Our code is available on Github (Strong et al 2024 available at: https://github.com/GilesStrong/tomopt).
1 February 2000 in Bulletin of the Brazilian Mathematical Society, New Series
Cultural heritage conservation increasingly relies on non-destructive techniques and imaging methods based on the absorption or scattering of photons (X or γ-rays) or neutrons. While these techniques offer excellent imaging capabilities and material identification, their penetration depth becomes insufficient for large or dense objects, such as compact stone or metal artifacts. Moreover, their application is often constrained by logistical constraints, as they are typically limited to relatively small objects that can be transported to dedicated imaging facilities. Although x-ray computed tomography systems and portable fast neutron sources have begun to enable in situ studies, their use remains restricted by radiation hazard regulations. Muon tomography offers a promising alternative, overcoming these limitations due to its high penetration power, lack of radiation hazards, and the potential for portable detector designs. In this work, we first discuss future applications of muon imaging in cultural heritage preservation. We then present simulation studies focused on statue imaging to determine the conditions under which the two existing muography techniques—absorption and scattering—are most effective. Finally, we outline the technological and methodological advancements required to establish muography as a reliable tool for cultural heritage applications. This contribution is part of the proceedings of the Muographers Workshop 2024.
The past several decades have seen significant advancement in applications using cosmic-ray muons for tomography scanning of unknown objects. One of the most promising developments is the application of this technique in border security for the inspection of cargo inside trucks and sea containers in order to search for hazardous and illicit hidden materials. This work focuses on the optimization studies for a muon tomography system similar to that being developed within the framework of the “SilentBorder” project funded by the EU Horizon 2020 scheme. Current studies are directed toward optimizing the detector module design, following two complementary approaches. The first leverages TomOpt, a Python-based end-to-end software that employs differentiable programming to optimize scattering tomography detector configurations. While TomOpt inherently supports gradient-based optimization, a Bayesian Optimization module is introduced to better handle scenarios with noisy objective functions, particularly in image reconstruction-driven optimization tasks. The second optimization strategy relies on detailed GEANT4-based simulations, which, while more computationally intensive, offer higher physical fidelity. These simulations are also employed to study the impact of incorporating secondary particle information alongside cosmic muons for improved material discrimination. This paper highlights the outcomes and key findings from these optimization studies.
The TomOpt software package is designed to optimise the geometric configuration and the specifications of detectors intended for muon scattering tomography, an imaging technique exploiting cosmic-ray muons. The software employs an end-to-end differentiable pipeline that models the interactions of muons with detectors and scanned volumes, infers properties of the scanned materials, and performs an optimisation cycle minimising a user-defined loss function. This article presents the implementation of a case study related to cargo scanning applications in the context of homeland security.