8 September 2025 in Journal of Applied Physics
Cultural heritage conservation increasingly relies on non-destructive techniques and imaging methods based on the absorption or scattering of photons (X or γ-rays) or neutrons. While these techniques offer excellent imaging capabilities and material identification, their penetration depth becomes insufficient for large or dense objects, such as compact stone or metal artifacts. Moreover, their application is often constrained by logistical constraints, as they are typically limited to relatively small objects that can be transported to dedicated imaging facilities. Although x-ray computed tomography systems and portable fast neutron sources have begun to enable in situ studies, their use remains restricted by radiation hazard regulations. Muon tomography offers a promising alternative, overcoming these limitations due to its high penetration power, lack of radiation hazards, and the potential for portable detector designs. In this work, we first discuss future applications of muon imaging in cultural heritage preservation. We then present simulation studies focused on statue imaging to determine the conditions under which the two existing muography techniques—absorption and scattering—are most effective. Finally, we outline the technological and methodological advancements required to establish muography as a reliable tool for cultural heritage applications. This contribution is part of the proceedings of the Muographers Workshop 2024.
1 April 2024 in Journal of Instrumentation
This paper reports the latest developmental efforts for a position-sensitive glass-based Resistive Plate Chamber (RPC) and a multi-channel Data AcQuisition (DAQ) system tailored for muon tracking in muography applications. The designed setup prioritizes portability, aiming for field applications where both the detector and the DAQ operate effectively in external environmental conditions. Comprehensive discussions on hardware development activities and signal processing techniques are included, incorporating noise filtering to enhance the accurate detection of real muons. A muon absorption measurement has also been carried out to understand the behavior of these detectors from an application perspective.
4 November 2024 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
4 November 2025 in Journal of Applied Physics
To achieve high-resolution muography of compact targets in scenarios with complex logistical constraints, we are developing a portable muon detector system utilizing glass Resistive Plate Chambers (RPCs). Although RPCs are well understood and widely used, our work focuses on developing a gas-tight variant specifically tailored for a broad range of muography applications, with key design goals including portability, robustness, autonomy, versatility, safety, and cost-effectiveness. Our RPC detectors are designed with various configurations, each featuring unique characteristics and performance attributes. We investigate the temporal evolution of the surface resistivity of glass electrodes, as well as the detector efficiency at varying voltages and thresholds, over a span of several months. These RPCs have been utilized in a small-scale feasibility study on muon absorption using lead blocks. This article is part of the Proceedings of the International Muography Workshop 2024 held in Santa Fe, New Mexico, USA.