The Global Navigation Satellite System Occultation Sounder II (GNOS-II) payload onboard the Chinese Fengyun-3E (FY-3E) satellite is the world’s first operational spaceborne mission that can utilize reflected signals from multiple navigation systems for Earth remote sensing. The satellite was launched into an 836-km early-morning polar orbit on 5 July 2021. Different GNSS signals show different characteristics in the observations and thus require different calibration methods. With an average data latency of less than 3 h, many near real-time applications are possible. This article first introduces the FY-3E/GNOS-II mission and instrument design, then describes the extensive calibration methods for the multi-GNSS measurements, and finally presents application results in the remote sensing of ocean surface winds, land soil moisture and sea ice extent. Especially, the ocean surface wind product has been used in operational applications such as assimilation in the numerical weather prediction model and monitoring of tropical cyclones. Currently, GNOS-II has been carried by FY-3E, FY-3F (launched in August 2023) and FY-3G (launched in April 2023). It will be also carried by future follow-on FY series and a more complete multi-GNSS reflectometry constellation will be established.
The vigorous development of the global navigation satellite system (GNSS) has led to a boom in GNSS radio occultation (GNSS RO) and GNSS reflectometry (GNSS-R) techniques. Consequently, we have proposed an innovative signal processing scheme for spaceborne integrated GNSS remote sensors (SIGRS), combining a GNSS RO and a GNSS-R module. In the SIGRS, the GNSS-R module shares one precise orbit determination (POD) module with the GNSS RO module, and the GNSS-R module first achieves compatibility with GPS, BDS, and Galileo. Moreover, the programmable non-uniform delay resolution was introduced and first used by the SIGRS to generate the output DDM, which achieves a high delay resolution in the DDM central region around the specular point to improve the accuracy of basic observables but requires fewer delay bins than the conventional DDM with uniform delay resolution. The SIGRS has been successfully used to design the GNOS II onboard the Chinese FY-3E satellite, and the results of in-orbit operation validate the performance of the SIGRS, which means the SIGRS is an economically and technically efficient design and has become the first successful signal processing scheme for spaceborne integrated GNSS remote sensors around the world.
The global navigation satellite system radio occultation (GNSS-RO) is an important means of space-based meteorological observation. It is necessary to test the Global Navigation Satellite System Occultation signal receiver on the ground before the deployment of space-based occultation detection systems. The current approach of testing the GNSS signal receiver on the ground is mainly the mountaintop-based testing approach, which has problems such as high cost and large simulation error. In order to overcome the limitations of the mountaintop-based test approach, this paper proposes an accurate, repeatable, and controllable GNSS atmospheric occultation simulation system and builds a load performance evaluation approach based on the ground-based GNSS atmospheric occultation simulation system on the basis of it. The GNSS atmospheric occultation simulation system consists of the visualization and interaction module, the GNSS-RO simulation signal generation module, the GNSS-RO simulator module, the GNSS-RO signal receiver module, and the GNSS-RO inversion and evaluation module, combined with the preset atmospheric model to generate GNSS-RO simulation signals with a high degree of simulation, and comparing the atmospheric parameters of the inversion performance of the GNSS-RO signal receiver with the parameters of the preset atmospheric model to obtain the error data. The overall performance of the GNSS-RO signal receiver can be evaluated based on the error information. The novel approach to evaluate the GNSS-RO signal receiver performance proposed in this paper is validated by using the FY-3E (FengYun-3E) receiver qualification parts that have been verified in orbit, and the results confirm that the approach can meet the requirements of the GNSS-RO receiver performance test. This study shows that the novel approach to evaluate the GNSS-RO signal receiver performance in terms of the ground-based atmospheric occultation simulation system can efficiently and accurately be used to carry out the receiver test and provides an effective solution for the ground-based test of GNSS-RO signal receivers.
An evaporation duct is a kind of atmospheric event with a refractive index exceeding the curvature of the Earth, which mostly exists on the ocean surface. Evaporation ducts have a great influence on radar, such as causing blind zones or achieving over-the-horizon detection. However, there is a lack of effective technology for evaporation duct detection, especially for passive methods. Global Navigation Satellite System Reflectometry (GNSS-R) has demonstrated potential in various remote sensing applications. However, its utilization for evaporation duct retrieval has not yet been successfully achieved. This study investigates the impact of evaporation ducts on GNSS-R delay maps (DMs), demonstrating that they elevate the non-specular point region, with the extent of this rising zone correlating with the evaporation duct height (EDH). Through semi-physical simulation, the rise signal is modeled. During a four-day experiment, GPS-R DMs with obvious features of evaporation ducts were repeatedly observed. Additionally, this study attempts to find the maximum code delay in the experimental data. The EDH is retrieved using the maximum code delay and GPS elevation angle, exhibiting a 4 m error relative to the reference model under the condition that all effective waveforms are successfully received. The results demonstrate that the GNSS-R offers a promising passive method for evaporation duct detection.