In this study, the temperature distribution in human dermal tissues and possible burns as a result of local heating of the skin were analyzed numerically. In order to obtain the temperature profiles of the dermis, fat, and muscle layers, we solved the Pennes bio-heat equation whose source term was for heat exchange between blood and tissues. The degree of each burn was predicted by an Arrhenius-type damage function. Two boundary conditions, namely constant heat flux and constant temperature, were considered as heating methods. Skin temperature regulation by on/off repetition of heat flux was also considered as a boundary condition. Time-dependent increases in tissue temperature under constant heat flux were determined for the skin. Temperature profiles showed different slopes at each layer due to different thermophysical properties and blood perfusion. Constant temperature heating up to 320 K for 10 minutes did not cause a burn injury according to our results. The results also showed that burns can be avoided by controlling the skin temperature under 320 K. Taken together, our results showed that a high heat flux over a short heating period is safer than a low heat flux over a long heating period.
24 June 2015 in International Journal of Precision Engineering and Manufacturing
The research was carried out to analyze the combined and mechanical properties of polypropylene (PP)/fly ash (FA)/waste stone powder (WSP) composite materials. PP, FA and WSP were mixed and prepared into PP100 (pure PP), PP90 (90 wt% PP + 5 wt% FA + 5 wt% WSP), PP80 (80 wt% PP + 10 wt% FA + 10 wt% WSP), PP70 (70 wt% PP + 15 wt% FA + 15 wt% WSP), PP60 (60 wt% PP + 20 wt% FA + 20 wt% WSP) and PP50 (50 wt% PP + 25 wt% FA + 25 wt% WSP) composite materials using an injection molding machine. The research results indicate that all PP/FA/WSP composite materials can be prepared through the injection molding process and there are no cracks or fractures found on the surface of the composite materials. The research results of thermogravimetric analysis are consistent with expectations, indicating that the preparation method of the composite materials in this study is reliable. Although the addition of FA and WSP powder cannot increase the tensile strength, it is very helpful to improve the bending strength and notched impact energy. Especially for notched impact energy, the addition of FA and WSP results in an increase in the notched impact energy of all PP/FA/WSP composite materials by 14.58–22.22%. This study provides a new direction for the reuse of various waste resources. Moreover, based on the excellent bending strength and notched impact energy, the PP/FA/WSP composite materials have great application potential in the composite plastic industry, artificial stone, floor tiles and other industries in the future.