The present work provides an overview of the work on the interaction between hydrogen (H) and the steel’s microstructure. Different techniques are used to evaluate the H-induced damage phenomena. The impact of H charging on multiphase high-strength steels, i.e., high-strength low-alloy (HSLA), transformation-induced plasticity (TRIP) and dual phase (DP) is first studied. The highest hydrogen embrittlement resistance is obtained for HSLA steel due to the presence of Ti- and Nb-based precipitates. Generic Fe-C lab-cast alloys consisting of a single phase, i.e., ferrite, bainite, pearlite or martensite, and with carbon contents of approximately 0, 0.2 and 0.4 wt %, are further considered to simplify the microstructure. Finally, the addition of carbides is investigated in lab-cast Fe-C-X alloys by adding a ternary carbide forming element to the Fe-C alloys. To understand the H/material interaction, a comparison of the available H trapping sites, the H pick-up level and the H diffusivity with the H-induced mechanical degradation or H-induced cracking is correlated with a thorough microstructural analysis.
This work evaluates the permeation curve characteristics for four quenched and tempered generic, ternary alloys, each containing one specific carbide. The different carbides (W2C, Cr23C6, TiC, and V4C3, respectively) are induced by a quench and tempering treatment. The correlation is made between the different microstructural characteristics, including the carbides and the martensitic matrix, and the observed hydrogen diffusivity and thus the permeation transient. The permeation curves, obtained via the Devanathan and Stachurski method, are therefore compared with thermal desorption spectroscopy and hot extraction results. The delay of the permeation transient can be associated with the overall trap density, while the slope is related to the amount of reversible trapping sites. Generally, the obtained hydrogen permeation transient of the different ternary or Fe–C–X materials correlates with the hydrogen trapping ability. The following order of hydrogen diffusion is determined, i.e., Fe–C–V < Fe–C–Ti << Fe–C–Cr < Fe–C–W. The hydrogen trapping ability of the tempered induced carbides plays a decisive role in the value of the hydrogen diffusion coefficient.