Repairing, remanufacturing, and refurbishing high value metal components are crucial to move towards a more sustainable economy. Nowadays, repairing operations on high value parts, such as dies, are generally performed using time-consuming manual approaches that rely on the operator’s expertise. The research idea of this paper is to develop a retrofit kit to provide additive capabilities to an existing milling machine, allowing automatic repairing of components thanks to a fast switch between additive and machining operations without a relevant economic investment such the acquisition of a brand-new machine: the final cost of the solution is lower than 10% with respect to the mean cost of a 5-axis milling machine. The additive technology used in this work is Wire Arc Additive Manufacturing (WAAM) that is characterized by a higher deposition rate and a simpler and cost-effective equipment with respect to other techniques (e.g., laser cladding). The design of the system is illustrated in the paper together with the analysis of the results achieved repairing a test case: a die casting mold made of AISI H13 tool steel.
Additive manufacturing (AM) is an arising production process due to the possibility to produce monolithic components with complex shapes with one single process and without the need for special tooling. AM-produced parts still often require a machining phase, since their surface finish is not compliant with the strict requirements of the most advanced markets, such as aerospace, energy, and defense. Since reduced weight is a key requirement for these parts, they feature thin walls and webs, usually characterized by low stiffness, requiring the usage of low productivity machining parameters. The idea of this paper is to set up an approach which is able to predict the dynamics of a thin-walled part produced using AM. The knowledge of the workpiece dynamics evolution throughout the machining process can be used to carry out cutting parameter optimization with different objectives (e.g., chatter avoidance, force vibrations reduction). The developed approach exploits finite element (FE) analysis to predict the workpiece dynamics during the machining process, updating its changing geometry. The developed solution can automatically optimize the toolpath for the machining operation, generated by any Computer Aided Manufacturing (CAM) software updating spindle speed in accordance with the selected optimization strategies. The developed approach was tested using as a test case an airfoil.
In milling, the advancement of CAM strategies has increased the need for tailored algorithms for semi-finished phase computation. In some cases (e.g., thin-wall milling), variable radial engagement of the tool during the toolpath is desired, leading to the need of non-uniform machining allowance on the component that could be achieved only with a non-uniform offset algorithm, i.e., offset where the distance to the initial contour varies along that input. This work presents a general algorithm for non-uniform offset of polyline curves. The approach is based on 2D polygons and Boolean union operation, following these steps: (i) projection segments are generated, (ii) polygons (trapezoids and circular sectors) are created, (iii) Boolean union of all the polygons is performed, (iv) boundary of interest is extracted. The proposed algorithm is able to handle both internal and external offset and is robust for complexity of both the polyline and variable offset magnitude along that line, as proven by several examples and two applications to thin-wall milling provided.
Dot-by-dot Wire and Arc Additive Manufacturing (WAAM) is a promising technique for producing large-scale lattice structures, offering significant benefits in terms of deposition rate and material utilization. This study explores strategies for fabricating bar intersections using the dot-by-dot WAAM technology, focusing on creating robust and predictable structures without requiring parameter modifications or real-time monitoring during the deposition. Two different deposition strategies were proposed, that can be, at least geometrically, applied to a general intersection with multiple bars with different angles. In this work such strategies were only experimentally tested on two-bar intersections, assessing their performance in terms of geometrical accuracy, symmetry, and material efficiency. Strategies which utilize layer-by-layer deposition with multiple overlapping dots, called B here, demonstrated the best results in terms of the geometrical features in the intersection zone, assessed by different metrics obtained through an analysis of pictures, such as low asymmetry and high material volume in the intersection zone. In addition, the findings suggest that removing cooling pauses during the deposition of multiple dots on the same layer slightly improves the joint by minimizing excess material buildup. The proposed approach offers a scalable framework for optimizing intersection deposition, paving the way for improved large-scale metal lattice structure manufacturing.
In 3-axis milling, cutting force analysis represents one of the main methods to increase the quality and productivity of the process. In this context, cutting force shape gives information of both monitoring and prediction of the cutting process. However, the cutting force shape is not unique, and it changes according to the cutting strategy, tool geometry, and cutting parameters. This paper presents a comprehensive approach to predict and classify cutting force shapes in 3-axis milling operations. In detail, the proposed approach starts by classifying the cutting force shapes for a single fluted endmill (i.e., single flute force shape), and, considering how the single flute force shapes may overlap one another, it extends the classification to a general multiple-fluted endmill. Moreover, the method provides, through analytical equations, angles, and magnitude dimensionless parameters of each key point, describing each shape classified. Finally, the proposed approach was experimentally validated through several milling tests in different cutting conditions.