In milling, the advancement of CAM strategies has increased the need for tailored algorithms for semi-finished phase computation. In some cases (e.g., thin-wall milling), variable radial engagement of the tool during the toolpath is desired, leading to the need of non-uniform machining allowance on the component that could be achieved only with a non-uniform offset algorithm, i.e., offset where the distance to the initial contour varies along that input. This work presents a general algorithm for non-uniform offset of polyline curves. The approach is based on 2D polygons and Boolean union operation, following these steps: (i) projection segments are generated, (ii) polygons (trapezoids and circular sectors) are created, (iii) Boolean union of all the polygons is performed, (iv) boundary of interest is extracted. The proposed algorithm is able to handle both internal and external offset and is robust for complexity of both the polyline and variable offset magnitude along that line, as proven by several examples and two applications to thin-wall milling provided.
In 3-axis milling, cutting force analysis represents one of the main methods to increase the quality and productivity of the process. In this context, cutting force shape gives information of both monitoring and prediction of the cutting process. However, the cutting force shape is not unique, and it changes according to the cutting strategy, tool geometry, and cutting parameters. This paper presents a comprehensive approach to predict and classify cutting force shapes in 3-axis milling operations. In detail, the proposed approach starts by classifying the cutting force shapes for a single fluted endmill (i.e., single flute force shape), and, considering how the single flute force shapes may overlap one another, it extends the classification to a general multiple-fluted endmill. Moreover, the method provides, through analytical equations, angles, and magnitude dimensionless parameters of each key point, describing each shape classified. Finally, the proposed approach was experimentally validated through several milling tests in different cutting conditions.
Cutting forces analysis is one of the most important means of improving machining quality and productivity. In 3-axis milling, the frequency domain analysis of the cutting forces provides information which can be adopted for both predicting and monitoring the cutting process. However, the evaluation of the cutting forces spectra requires the application of specific tools (i.e., Fourier’s Transform) to the time domain representation of the same cutting forces. This paper presents analytical formulations to directly evaluate the cutting force spectra starting from the tool geometry and the cutting parameters. The proposed formulations start from the expression of the cutting forces as a Fourier series and enhance the predictions showed in previous works by reducing the overall number of calculations needed. Then, the proposed formulations are applied to identify both radial and axial depths of cut exploiting the normalized cutting force spectrum. Finally, the proposed formulations and their application were numerically and experimentally validated. This work represents a preliminary step in the development of a monitoring system to identify cutting conditions in 3-axis milling.