JIAJUN XU

Dr. JIAJUN XU

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2017 in Discover Nano
Verified
Journal Article
Open access
PDF file
VTVu Trinh
Vu Trinh
JXJIAJUN XU
JIAJUN XU
This work experimentally studied the convective flow and heat transfer characteristics of a novel nanostructured heat transfer fluid: “ethanol/polyalphaolefin nanoemulsion” flowing through 12 circular minichannels of 1-mm diameter each. Ethanol/polyalphaolefin nanoemulsion is a thermodynamically stable system formed by dispersing ethanol into a mixture of “polyalphaolefin (PAO)” and surfactants. In this study, ethanol/PAO nanoemulsion is used as the working fluid to study the effect of ethanol nanodroplets on its convective flow and heat transfer characteristics. In addition, the effect of flow regime on its heat transfer is examined. It is found that using ethanol/PAO nanoemulsion fluids can improve convective heat transfer compared to that of pure PAO under both single- and two-phase flow regimes. For single-phase flow, there is no significant difference in Nusselt number between ethanol/PAO nanoemulsion and pure PAO in laminar flow regime. However, when entering transition flow regime, the ethanol/PAO nanoemulsion fluid showed a substantial increase in Nusselt number. Meanwhile, there is an increase in pressure drop and early onset of the laminar-turbulent transitional region for the ethanol/PAO nanoemulsion compared to pure PAO. The heat transfer coefficient of ethanol/PAO nanoemulsion can be further enhanced when the ethanol nanodroplets undergo phase change, which is hypothesized that such an effect is likely related to the enhanced interfacial thermal transport between the nanodroplets and base fluid under elevated temperature and the latent heat of phase changeable nanodroplets inside nanoemulsion. Further studies are needed to fully explore the convective heat transfer properties of nanoemulsion fluids.

1 April 2015 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
JXJIAJUN XU
JIAJUN XU
BHBoualem Hammouda
Boualem Hammouda
FCFangyu Cao
Fangyu Cao
BYBao Yang
Bao Yang
In this study, the nanostructures and thermophysical properties (thermal conductivity, viscosity, and specific heat) of one new type of nanostructured heat transfer fluid, water/polyalphaolefin nanoemulsion fluid, are investigated. The water/polyalphaolefin nanoemulsion fluids are thermodynamically stable containing dispersed water nanodroplets formed by self-assembly. It has been found that the nanostructure inside nanoemulsion fluids may affect their thermophysical properties, especially the phase change heat transfer characteristics. The small-angle neutron scattering technique has been used to help identify the nanostructure inside the water/polyalphaolefin nanoemulsion fluids. By using the 3-region Guinier–Porod model, the fitting curve shows that there is a nonlinear variation of the nanodroplets’ size and shape with water’s concentration, which also coincides with the trend of its viscosity and specific heat. On the other hand, the thermal conductivity increases linearly with higher volume fraction of water which, however, appears to be insensitive to the nanostructure change. While the water nanodroplets inside can increase the thermal conductivity of the nanoemulsion fluid by 16%, its effective specific heat can be boosted up to 90% when the water nanodroplets undergo liquid–solid phase change.

20 September 2024 in Nanomanufacturing and Metrology
Verified
Journal Article
Open access
PDF file
KBKaiya Baker
Kaiya Baker
HBHayden Brown
Hayden Brown
FGFisseha Gebre
Fisseha Gebre
JXJIAJUN XU
JIAJUN XU
In this study, a novel deposition technique that utilizes diethylzinc (C4H10ZnO) with H2O to form a ZnO adhesion layer was proposed. This technique was followed by the deposition of vaporized nickel(II) 1-dimethylamino-2-methyl-2-butoxide (Ni(dmamb)2) and H2 gas to facilitate the deposit of uniform layers of nickel on the ZnO adhesion layer using atomic layer deposition. Deposition temperatures ranged from 220 to 300 °C. Thickness, composition, and crystallographic structure results were analyzed using spectroscopic ellipsometry, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD), respectively. An average growth rate of approximately 0.0105 angstroms per cycle at 260 °C was observed via ellipsometry. Uniform deposition of ZnO with less than 1% of Ni was displayed by utilizing the elemental analysis function via SEM, thereby providing high-quality images. XPS revealed ionizations consistent with nickel and ZnO through the kinetic and binding energies of each detected electron. XRD provided supplemental information regarding the validity of ZnO by exhibiting crystalline attributes, revealing the presence of its hexagonal wurtzite structure.

3 March 2012
Verified
Conference Paper
Closed access
PDF file
JXJIAJUN XU
JIAJUN XU
BYBao Yang
Bao Yang
In this work, thermophysical properties and pool boiling characteristics of water-in-polyalphaolefin (PAO) nanoemulsion fluids and their dependence on water concentration have been investigated experimentally. Water-in-PAO nanoemulsion fluids are formed via self-assembly with surfactant sodium sullfosuccinate (AOT). Thermal conductivity of the fluids is found to increase with water concentration, as expected from the Maxwell equation. However, the measured thermal conductivity increase is very moderate, e.g., a 16% increase for 8.6Vol. %. Unlike thermal conductivity, the dynamic viscosity of these nanoemulsion fluids first increases with water concentration, reaches a maximum, and then decreases. This trend could be attributed to the attractive forces among water droplets. The boiling behavior of these nanoemulsion fluids has been altered due to water nanodroplets. Adding water nanodroplets can lower the nanoemulsion’s boiling point compared to the pure PAO. Another interesting phenomenon observed is that pool boiling of nanoemulsion fluids randomly follows two different curves when the water concentration is in the range of 5.3 Vol. % to 7.8 Vol. %. The mechanism underlying this phenomenon is not understood yet, but it may be related to the evolution of microstructures in the water-in-PAO nanoemulsion fluids.

25 October 2021 in International Journal of Energy Research
Verified
Journal Article
Closed access
PDF file
MKMehdi Kabir
Mehdi Kabir
TGTakele Gemeda
Takele Gemeda
WDWondwosen Demisse
Wondwosen Demisse
SESandy Estrada
Sandy Estrada
LWLei Wang
Lei Wang
JXJIAJUN XU
JIAJUN XU

16 November 2020
Verified
Book Chapter
Open access
PDF file
MKMehdi Kabirnajafi
Mehdi Kabirnajafi
JXJIAJUN XU
JIAJUN XU
Vapor quality is one of the crucial parameters substantially affecting the flow boiling heat transfer coefficient. Hence, the reliability and accuracy of vapor quality measurements is of a great significance to accurately investigating the effect of vapor quality on the local flow boiling heat transfer coefficients. In the present study, various experimental approaches are represented to measure and control local vapor quality for flow boiling tests. Experimental approaches are classified based on the type of thermal boundary conditions imposed on the tube wall, that is, known constant wall heat flux and constant wall temperature (unknown variable wall heat flux). In addition, in-situ techniques are also investigated to measure local vapor quality regardless of the governing thermal boundary conditions within two-phase flow experiments. Finally, the experimental methodologies are compared based on their level of reliability and accuracy in measurement, costliness and affordability, and simplicity in execution to address their potential merits and demerits.