This paper presents a proposed global optimal energy management strategy based on dynamic programming to enhance the energy consumption efficiency of an agricultural hybrid tractor that is equipped with a continuously variable transmission (CVT). Firstly, using a diesel-electric parallel agricultural hybrid tractor as the research object, a tractor-rotary tillage coupling dynamics model is constructed. Secondly, with the torque and speed of the motor, the torque and speed of the diesel engine, and the CVT speed ratio as the control variables, the state of charge (SOC) of the power battery as the state variable, and the goal of minimizing the total energy consumption of the whole machine, a global optimal energy management model based on dynamic programming is established. Finally, the field operation measured data is injected into the MATLAB simulation model, and experiments are carried out to verify the effectiveness of the energy management strategy. The results show that compared with the power-following energy management strategy, the proposed energy management strategy can make the diesel engine and electric motor work in the optimal area, and effectively reduce the total cost of energy consumption of the tractor during field operations. Under the condition of rotary tillage, the total cost of energy consumption is decreased by 16.89%.

In this study, an energy-saving control strategy based on instantaneous optimization is proposed to improve the energy efficiency of hybrid tractors. Using a parallel diesel–electric hybrid tractor as the research object, the topological and working characteristics were analyzed, and a coupled dynamic model of rotary tillage and tractor plow was constructed. Aiming to minimize the equivalent fuel consumption of the entire machine, the motor and diesel engine torques were taken as the control variables, and the state of charge of the power battery was taken as the state variable. Subsequently, an energy-saving control strategy based on instantaneous optimization is proposed. Finally, a simulation experiment was carried out using MATLAB to verify the effectiveness of the energy-saving control strategy based on instantaneous optimization. Compared with the energy-saving control strategy based on power-following, the results show that energy-saving control strategy based on instantaneous optimization can reasonably control the operating state of the diesel engine and motor. Therefore, the diesel engine and motor work in the high-efficiency area, and effectively reduce the equivalent fuel consumption of the tractor during field operation. Under rotary tillage and plowing conditions, equivalent fuel consumption is reduced by 4.70% and 6.31%, respectively.

For the poor working conditions of tractors, single-motor drive tractors usually choose a motor with large parameters, which leads to the lower efficiency of the motor under low-load conditions. Taking a wheeled tractor of YTO as the research object, a driving scheme of a dual-motor electric tractor was proposed, and the main components of the tractor electric drive system were matched. Based on MATLAB/Simulink, the electric tractor drive system model was established. On the premise of meeting the dynamic needs of the tractor, an optimization model was established with the tractor power consumption as the optimization goal and the power distribution coefficient of dual motors as the decision variable. The optimization model was solved by a genetic algorithm. The driving characteristics of the optimized electric tractor and the original tractor, as well as the instantaneous power consumption and total power consumption of the tractor before and after optimization, are compared and analyzed. The results show that the traction efficiency of the optimized electric tractor is about 2.7% higher than that of the original tractor, and the total power consumption of the electric tractor before and after optimization is reduced by 8.2%. The power performance and economy of the tractor after parameter matching and optimization are significantly improved.

To solve the problems of the low driving efficiency of a fuel cell tractor power source and the high hydrogen consumption caused by the irrational power allocation of the energy source, the power system was divided into two parts, power source and energy source, and a dual-source cooperative optimization energy management strategy was proposed. Firstly, a general energy efficiency optimization method was designed for the power source composed of a traction motor and PTO motor, and the energy source was composed of a fuel cell and power battery. Secondly, the unified objective function and constraint conditions were established, and the instantaneous optimization algorithm was used to construct the weight factor. The instantaneous optimal drive efficiency energy management strategy and the instantaneous optimal equivalent hydrogen consumption energy management strategy were designed, respectively. Finally, with the demand power as the transfer parameter, the instantaneous optimal drive efficiency energy management strategy and the instantaneous optimal equivalent hydrogen consumption energy management strategy were integrated to form a dual-source collaborative optimal energy management strategy. In order to verify the effectiveness of the proposed strategy, a rule-based energy management strategy was developed as a comparison strategy and tested in an HIL test under plowing and rotary plowing conditions. The results show that the average fuel cell efficiency of the proposed strategy increased by 7.86% and 8.17%, respectively, and the proposed strategy’s equivalent hydrogen consumption decreased by 24.21% and 9.82%, respectively, compared with the comparison strategy under the two conditions. It can significantly reduce the SOC fluctuation of the power battery and extend the service life of the power battery.

To significantly reduce fuel consumption and improve fuel economy in hybrid tractor under complex working conditions, an energy—saving strategy based on working condition prediction and Deep Deterministic Policy Gradient and Fuzzy control (DDPG-Fuzzy) was proposed. Firstly, a hybrid tractor system dynamics model containing diesel, motor, and power battery was established. Secondly, a working condition prediction model for plowing velocity and resistance was constructed based on the adaptive cubic exponential smoothing method. Finally, a two-layer control architecture was designed. The upper layer adopted the DDPG algorithm, which takes demand torque, equivalent fuel consumption, and the State of Charge (SOC) as state inputs to optimize energy consumption by generating the diesel benchmark torque through the policy network. The lower layer introduced a fuzzy control compensation mechanism that calculates the torque correction based on the plowing velocity error and the plowing resistance deviation to adjust the power allocation. In light of on this, an energy—saving strategy for hybrid tractor based on working condition prediction and DDPG-Fuzzy control was proposed. Under a standard 140 s plowing cycle, the results showed that the working condition prediction model achieved mean prediction accuracies of 97% for plowing velocity and 96.8% for plowing resistance. Under plowing conditions, the proposed strategy reduced the equivalent fuel consumption by 9.7% compared to the power-following strategy, and reduced SOC by 4.4% while maintaining it within a reasonable range. By coordinating the operation of the diesel and motor within high-efficiency regions, this approach enhances fuel economy under complex working conditions.

Hydrogen fuel cell tractors are emerging as a new power source for tractors. Currently, there is no mature energy management control method available. Existing methods mostly rely on engineers’ experience to determine the output power of the fuel cell and the power battery, resulting in relatively low energy utilization efficiency of the energy system. To address the aforementioned problems, a power optimization method for the energy system of hydrogen fuel cell wheel-driven electric tractor was proposed. A dynamic model of tractor ploughing conditions was established based on the system dynamics theory. From this, based on the equivalent hydrogen consumption theory, the charging and discharging of the power battery were equivalent to the fuel consumption of the hydrogen fuel cell, forming an equivalent hydrogen consumption model for the tractor. Using the state of charge (SOC) of the power battery as a constraint, and with the minimum equivalent hydrogen consumption as the objective function, an instantaneously optimized power allocation method based on load demand in the energy system is proposed by using a traversal algorithm. The optimization method was simulated and tested based on the MATLAB simulation platform, and the results showed under ploughing conditions, compared with the rule-based control strategy, the proposed energy system power optimization method optimized the power output of hydrogen fuel cells and power batteries, allowing the energy system to work in a high-efficiency range, reducing the equivalent hydrogen consumption of the tractor by 7.79%, and solving the energy system power distribution problem.